A-Tek Systems Group LLC
Distributor of the highest quality SMT assembly equipment. Our 45 years of combined experience and commitment to excellence have earned us the reputation as the premier distributor in the Americas.
SMT Assembly Equipment Products.
A-Tek Systems Group was established in 2005 to service the PCB electronics market with leading edge assembly equipment that focuses on high reliability and cost efficiencies demanded by today's stringent manufacturing processes.
A-Tek is a national distributor and is factory trained for providing a high level of service and support. A-Tek products include:
- Asscon Vapor Phase Reflow,
- Ebso Selective Soldering,
- Kolb Cleaning Technology Stencil and Board Cleaners, and detergents,
Based in Colorado, A-Tek also maintains spare parts inventory.
A-Tek Systems Group LLC Postings
102 products »
The E33-1 has a cutting length infinitely and easily adjustable, drive by hand crank or electric motor drive (E 33-1M option). Additionally, its possible to cut directly on the belt, and maintenance-free due to the robust construction. ...
This bending and cutting device for axially taped components is perfectly versatile for the processing of components and wire bridges. No tools required for setting the grid size and leg length. Also, its maintenance-free because of robust constructi...
The C 043 is an axial trimmer and former. With this new cutting and bending machine, you have the ability to work with axial lying and standing components. With only a few grips and less than five minutes, this machine is robust enough to change from...
This universal and progressive machine is ideal for the processing axial components. The E 400 allows for gradual adjusting of cutting units, pitches and length of components, as well as speed. The bending components come with a special roller design...
The C 066 MA is a cutting device for radially belted components with compensation of belt tolerances. With this device, all components radially, according to the IEC specs, can be cut to size from the belt. Lastly, the integrated contact device for c...
1.png)
This machine is inexpensive, universal cutting and bending device for loose, radial components. The pneumatic basic unit comes with your necessary cutting plate or with a mounting plate for beading tools. Furthermore, 2,3,4 and 5mm plates are availab...
This machine is an inexpensive, universal cutting and bending device for loose, radial components. The pneumatic basic unit comes with your necessary cutting plate or with a mounting plate for beading tools. Furthermore, 2,3,4 and 5mm plates are avai...
The C 057 is used to cut the end wires to the length you need. This includes components with axial and radial wire connections, including IC's. Female connectors can also be cut with this. An obliquely positioned knife is moved under the cutt...
This pneumatically driven device has a very robust cutting knife with angle cutting. Its mainly useful for cutting D-SUB, pin and plug-in strips or components with thick connecting wires. Lastly, the cutting plate is provided with perforated grids an...
An automatic cutting and bending device for radial component, power transistors of the TO126 / TO220 / SOT design. The E120 has special features including: effortless tool change, high ease of use, feed channel. Also, you can easily change and adjust...
1 technical article »
Vapor Phase Technology and its Application
Mar 27, 2013 | Allen Duck
Vapor phase, once cast to the annals’ of history is making a comeback. Why? Reflow technology is well developed and has served the industry for many years, it is simple and it is consistent. All points are true – when dealing with the centre section of the bell curve. Today’s PCB manufacturers are faced with many designs which no longer fall into that polite category but rather test the process engineering groups with heavier and larger panels, large ground planes located in tricky places, component mass densities which are poorly distributed, ever changing Pb Free alloys and higher process temperatures. All the time the costs for the panels increase, availability of “process trial” boards diminishes and yields are expected to be extremely high with zero scrap rates. The final process in the assembly line has the capacity to secure all the value of the assembly or destroy it. If a panel is poorly soldered due to poor Oven setup or incorrect programming of the profile the recovery of the panel is at best expensive, at worst a loss. For these challenges people are turning to Vapor Phase....
8 news releases »
Kolb Cleaning Technology USA LLC Introduces the next generation in stencil cleaning technology
Jul 26, 2018 | Kolb AQUBE MV8sTWIN
A-Tek Systems To Feature its Latest Advancements at APEX 2015
Feb 16, 2015 | ASYS is proud to announce that several new innovations and products will be shown at the upcoming IPC APEX in San Diego. Uptime is an important factor in any SMT production, as it is a key measurement to judge how efficient a plant is operating. Therefore, ASYS continued the development of PULSE. An entire production line can be monitored not only via a tablet, but now even via a smartwatch called PULSE Wear. Important to note that this is an open interface, so any equipment supplier is welcome to take advantage of it.
Seagate implements Asscon Vapor Phase
Sep 17, 2013 |
Seagate Technology is a leading provider of hard drives and storage solutions. Founded in 1979, Seagate employees 50,000 people worldwide and is one of Longmont Colorado’s largest employers. The Longmont operation includes a small prototype design center providing manufacturing services to Seagate engineering teams , and is an integral part in process of taking a product from development to product launch.
A-Tek Systems Group Introduces the Getech GSR1290 Large Panel Depaneling Machine
Jun 03, 2013 | A-Tek Systems Group is pleased to introduce the Getech GSR1290, the latest stand alone router in the GSR-Series. Getech Automation Pte Ltd is the industry leader in depaneling technologies, with more than 20 years of experience and over 1000 systems installed worldwide to include both stand alone (batch) and in-line (automated) PCB depaneling machines.
A-Tek Systems Group New Product Announcement
Nov 13, 2012 | A-Tek Systems Group is very pleased to introduce the newly re-designed Q300 table top vapor phase reflow machine for release to the North American market.
A-Tek Systems Group Introduces the New Kolb C-Class Cleaners for Both Stencil and Screen Cleaning
May 09, 2012 | A-Tek Systems Group introduces the new Kolb Cleaning Technology C-Class Cleaner Series PS300 to include 4 platforms to chose from: -VL, -VS, -HD, and -CA featuring PowerSpray® technology. The Kolb PS300 C-Class Cleaners are fully automatic, compact and cost competitive without sacrificing cleaning efficiencies and reliability.
A-Tek Systems Group LLC signs a distribution agreement with Kolb Cleaning Technologies
Nov 15, 2010 | A-Tek Systems Group, LLC, an electronics equipment distribution company based out of Berthoud, CO is pleased to announce their North American distribution sales and service agreement with Kolb Cleaning Technology GmbH.
A-Tek Systems Group LLC launches new website
Aug 19, 2010 | A-Tek LLC, an electronics equipment distribution company based out of Berthoud, CO is pleased to announce the launch of their brand new website, http://www.atekllc.com., a web portal devoted to PCB electronics manufacturing and process improvement technologies.
