CyberOptics Corporation

CYBEROPTICS is a global leader in high-precision 3D sensors that significantly improve yields and productivity in the 3D scanning and metrology, Surface Mount Technology & Semiconductor Markets

Inspection

The Global Technology Leader in High Precision 3D Sensors

CyberOptics sensors are being used in general purpose metrology and 3D scanning, surface mount technology (SMT) and semiconductor markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of its key vertical segments.

Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.

CyberOptics 3D Sensors

CyberOptics Corporation Postings

12 products »

SQ3000™ Fastest 3D AOI In the Industry

The Ultimate in Speed and Accuracy. SQ3000 3D Automated Optical Inspection (AOI) system maximizes ROI and line utilization with 3D multi-view sensors that enable fastest 3D inspection in the industry. SQ3000 incorporates Multi-Reflecti...

Inspection

SQ3000™ Fastest 3D AOI In the Industry

QX600™ Ultra-Fast, Ultra-Versatile AOI

The QX600™ is designed with an all-new SIM (Strobed Inspection Module) with enhanced illumination – delivering the best 01005 and solder joint inspection performance ever. With a higher sensor resolution (12 µm), you ge...

Inspection

QX600™ Ultra-Fast, Ultra-Versatile AOI

QX500™ High-Speed AOI

Optimum Performance At Astonishing Speed. The multi-award winning QX500™ embraces CyberOptics unique image acquisition solution – Strobed Inspection Module (SIM) and is capable of inspecting 01005 comp...

Inspection

QX500™ High-Speed AOI

QX250i™ Fast, Flexible, High Performance AOI

Simultaneous Double Sided Inspection System The QX250i™ AOI system offers fast, flexible and high performance inspection for all applications and is ideally suited for pre-reflow and selective solder inspection. The top and botto...

Inspection

QX250i™ Fast, Flexible, High Performance AOI

QX150 Tabletop AOI System With In-Line Performance

Ideal For High-Mix, Low-Volume Environment. The QX150™ is powered by an all-new SIM (Strobed Inspection Module) with enhanced illumination – designed to deliver true, in-line inspection performance. The SIM enables on-the-f...

Inspection

QX150 Tabletop AOI System With In-Line Performance

QX150i Flexible 2D AOI

High Value, Flexible Inspection For All Applications. The QX150i™ AOI system offers high value and high flexibility for all applications and is ideally suited for pre-reflow and selective solder inspection. The Strobed Inspection...

Inspection

QX150i Flexible 2D AOI

SE600™ High Performance 3D SPI

Ultimate Precision Accuracy With World-Class Usability. The SE600™ – CyberOptics’ flagship SPI system, is the most advanced, high performance system ever. SE600™ brings together best accuracy and world-class usa...

Inspection

SE600™ High Performance 3D SPI

SE500ULTRA™ High-Speed 3D SPI

World-Class Accuracy At Fastest Speed. The SE500ULTRA™ system is power-packed with 30% more speed, newly designed V5 series software enabling world class user experience and optional dual illumination sensor. An all-new...

Inspection

SE500ULTRA™ High-Speed 3D SPI

SE500-D™ Dual Lane 3D SPI

Largest Board Capability With Flexible Conveyor Configuration. The SE500-D™ Dual Lane 3-D SPI System takes solder paste inspection to the next level with its flexible conveyor setup design and large board capability comparable wi...

Inspection

SE500-D™ Dual Lane 3D SPI

SE500-X™ Fastest, Most Accurate 3D SPI (Large Board)

With SE500-X™ - 100% 3D solder paste inspection system, CyberOptics pushes inspection speed to the highest level possible. The SE500-X™ is capable of inspecting the most demanding assemblies with 80cm²/sec inspection spe...

Inspection

SE500-X™ Fastest, Most Accurate 3D SPI (Large Board)

See all products from CyberOptics Corporation »

3 technical articles »

Return on Investment of a Pre-Reflow AOI System

Jun 30, 2015 | CyberOptics Corporation

This paper describes the losses from defects at the placement process in the SMT line. Two case studies of European and Taiwanese SMT manufacturers illustrate the actual losses from their defects. An evaluation method to select a pre-reflow AOI system maximizing the return on investment (ROI) is introduced. In the end, ROIs of three commercial pre-reflow AOI systems are compared to demonstrate the importance of selecting an appropriate AOI system. This paper will increase the probability that anyone installing an AOI system during the pre-reflow process will obtain a successful gain with short payback period....

True Height Measurement in Solder Paste Inspection

Apr 29, 2015 | Dr. Subodh Kulkarni

SPI equipment is routinely used in Printed Circuit Board (PCB) manufacturing to monitor and control one of the most crucial steps affecting the finished quality of circuit board. Solder paste deposition is the key process in board assembly operations using SMT techniques. Our LSM™ system was the industry's first popular method of manually inspecting solder paste; our SE systems revolutionized SMT production by offering an automated method for performing in-process 3D inspection on the assembly line. SPI systems measure the height and volume of the solder pads before the components are applied and the solder melted, and when used properly, can reduce the incidence of solder-related defects to statistically insignificant amounts. Critical to the SPI measurement is the accuracy of the height measurement because that has a direct correlation with solder volume and defects....

Advanced modelling technique achieves near to zero set up time and minimal tuning

Apr 29, 2015 | Sean Langbridge

Statistical Appearance Modelling technology enables an AOI system to “learn real world variation” based on operator interaction with inspection task results. This provides an accurate statistical description of normal variation in a product. With modelling technology, the user does not have to anticipate potential defects as the system will “flag” anything outside the “normal production range”. And, since the system is programmed with real production variation, it is sensitive to small subtle changes enabling reliable defect detection. Autonomous prediction of process variation enables an AOI system to be set up from a single PCB with production-ready performance. Setup time can be < 15 minutes from data input to first PCB inspection making it an ideal solution for NPI and first-off verification....

212 news releases »

CyberOptics Highlights the New SQ3000™+ Inspection and Metrology System at NEPCON Asia

Sep 17, 2021 | CyberOptics® Corporation (NASDAQ: CYBE) will showcase its SQ3000™ Multi-Function system for AOI, SPI and CMM, and feature its new SQ3000™+ system for advanced applications at NEPCON Asia from Oct. 20-21, 2021 at the Shenzhen Convention Center, China in Booth #1J45.

CyberOptics to Showcase High-Precision Inspection and Metrology Solutions at the SEMI Connecting Heterogeneous Systems Summit

Aug 13, 2021 | CyberOptics® Corporation (NASDAQ: CYBE) will feature the WX3000™ metrology and inspection system with MRS™ sensor technology, and high-precision sensors for semiconductor tool set-up and diagnostics at the VirtualConnecting Heterogeneous Systems Summit Sept. 1-3, 2021.

CyberOptics Demonstrates High-Precision Sensor Technologyat Touch Taiwan

Apr 08, 2021 | CyberOptics® Corporation (NASDAQ: CYBE) will showcase the In-Line Particle Sensor™ (IPS), WaferSense® wireless measurement sensors and the NanoResolution Multi-Reflection Suppression™ (MRS™) sensor for inspection and metrology at the Touch Taiwan Exhibition on April 21-23rdat the Taipei Nangang Exhibition Center in Taiwan in booth M330.

CyberOptics to Share Technical Presentation About Best-in-Class Airborne Particle Sensing Processes at PhotoMask Japan

Mar 31, 2021 | CyberOptics® Corporation (NASDAQ: CYBE) will present a technical paper at PhotoMask Japanon April 20that 6p.m. CDT / April 21st at 8a.m. JST.

CyberOptics' SQ3000™ Multi-Function System for Effective Yield Management to Be Shown at NEPCON China

Mar 23, 2021 | CyberOptics® Corporation (NASDAQ: CYBE) will exhibit at NEPCON China, scheduled to take place April 21-23, 2021 at the Shanghai World Expo Exhibition & Convention Center. The company will showcase the SQ3000™ Multi-Function for AOI, SPI and CMM.

CyberOptics to Showcase Metrology and Inspection Solutions at SEMICON China

Mar 12, 2021 | CyberOptics® Corporation (NASDAQ: CYBE) will feature the WX3000™ metrology and inspection system with Multi-Reflection Suppression™ (MRS™) sensor technologyat SEMICON China,scheduled to take place March 17-19, 2021 at the Shanghai New International Expo Centre, hall N1, booth 1387 and 1325. The company also will demonstrate high-precision WaferSense® sensors for semiconductor tool setup and diagnostics.

CyberOptics to Present Technical Paper'Fast, 100% Wafer Bump Metrology and Inspection' at Virtual IEEE PAINE Conference

Nov 18, 2020 | CyberOptics® Corporation (NASDAQ: CYBE) will present at the Virtual IEEE International Conference on Physical Assurance and Inspection of Electronics (PAINE) on December 16th at 8:00amCT.

CyberOptics Receives Award for Cyber CMM Software for SQ3000 Inspection and Metrology Systems

Oct 29, 2020 | CyberOptics® Corporation (NASDAQ: CYBE) announces that it was awarded a 2020 Mexico Technology Award in the category of Software – Process Control for its CyberCMM™. The award was announced during a Virtual Award Ceremony that took place Monday, October 26, 2020.

202 more news releases from CyberOptics Corporation »

Reflow Oven

Industry 4.0 Reflow Oven