Mega™ ION Batch PCB Cleaners

Mega™ ION Batch PCB Cleaners Description:

World’s First Cleaner & ROSE Tester

• Removes Fluxes
• Performs IPC ROSE Test
• Closed Loop Operation - No Drains
• Aqueous or Organic Solvents
• Stainless Steel Construction
• Automatic Wash/Rinse/Test/Dry
• 230VAC, 10AMP, 50/60Hz

Mega™ ION cleaners are designed for high reliability, environmentally-friendly, solvent-based cleaning and testing applications. These closed-loop, solvent regenerative systems feature quantitative ionic contamination detection and ROSE cleanliness testing.

Wash and rinse cycles incorporate a highly effective spray under Mega ION Diagramimmersion process with strategically located venturi nozzles for maximum cleaning efficiency. Agitation can be controlled to handle sensitive wire-bonded substrates or difficult to clean, tightly-spaced flip chip technology.

Safety is designed into the Mega™ ION series. The process chamber is always empty when not in use and must be closed and latched before the cleaning cycle begins. Solvent replenishment is automated so the operator is never in contact with wash fluid during normal operational. At the end of the cleaning cycle, the process tank drains into an integrated holding tank at a controlled rate to minimze drag-out. At the end of the dry cycle, the process chamber is clean, dry and free of solvent.

Ionic testing is based on "ROSE", allowing the system to quantify ionic contamination of the circuit board after or before cleaning. This allows the operator to clean and test the circuit boards within one system.

The Mega ION cleaning system is the only system in its class to feature a patented solvent regeneration system. The system is capable of removing flux from the solvent medium while deionizing the solvent at the same time.

This aids solvent to remove ionic contaminants and fluxes from the board surface efficiently, maintaining the bath life of the solvent indefinitely.

It additionally allows the system to perform ionic contamination testing as defined by the ROSE test.

Features:

• 17" x 9" x 12" Standard Process Chamber
• Integrated Process Logging
• Fast Cycle Times (10-20 minutes)
• Multiple Cleaning Technologies
• Environmentally Friendly Operation with Solvents
• Sealed Process Chamber
• No Liquid Waste Streams
• Statistical Process Control
• Ideal for high Reliability Applications
• Small Footprint
• Easy Operate
• Designed for Safety
• Low Solvent Consumption & VOC Levels
• Closed-Loop Spray-Under-Immersion
• Multi-Solvent Compatible
• Cleans and Tests in One Operation
• Cleanliness Test Based on "ROSE"