Eureka Dry Tech SDC-501 Fast Super Dryer Dry Cabinet

Eureka Dry Tech SDC-501 Fast Super Dryer Dry Cabinet Description:

Eureka SDC-501 Fast Super Dryer Ultra Low Humidity Dry Cabinet Specs:

http://eurekadrytech.com/fast-super-dryer/sdc-501

Model: SDC-501 Fast Super Dryer
Capacity: 372 Liters
Humidity Range: LESS THAN 10%
Recovery Time: Recovers to ≤ 10% RH within 30 minutes after accessing door for 30 seconds or less.
External Dimension: 88*90*63 cm (W*H*D)
Internal Dimension: 83*79*48 cm (W*H*D)
Door Type: Anti-Static Glass
Hygrometer: German Digital TESTO Thermal Hygrometer
Power Consumption: 100 Watts
Lock Type: Standard

Anti-static Glass,
Anti-static Paint on Body and Shelves,
​Anti-static Stands,
1 M ω Ground Wire

Features of Eureka Fast Super Dryer’s Ultra-low Humidity Dry Storage:

• Stable and reliable humidity control @ <10% RH (SDC series)

• Fast recovery times in ambient temperature and pressure (NTP) conditions without using costly nitrogen (N2) or dry air purging. Solving all moisture related problems while increasing yield rates.

• Moisture is removed and expelled from the cabinets by the use of desiccant dehumidifiers which automatically regenerates. No fans are required to ventilate.

• Dual hydrometer sensor designs with independent hydrometer monitoring relative humidity levels inside the cabinet.

• Provides moisture sensitive devices indefinite floor-life meeting IPC/JEDEC J-STD 033 standards. 

• Eureka’s dry cabinets will provide storage environment meeting IPC 1601 standards optimal for multi-layer Printed Circuit Board / Printed Wire Boards.

• All of Eureka’s Fast Super Dryer dry cabinets are equipped with anti-static paint, glass, casters and 1M ohm grounding cable meeting IEC-61340-5-1 (ESD) Standard.

Moisture problems solved with Eureka’s Ultra-low Humidity Storage Dry Cabinet

Eureka’s dry cabinets, dry boxes, and desiccators will provide ultra-low humidity storage environment conforming to IPC/JEDEC J-STD 033 & IPC-1601, storage and handling standards for MSDs and PCBs. Eureka Fast Super Dryer also dehumidifies during storage, providing alternative drying methods optimal for removing moisture in all moisture sensitive materials in SMT production, solving all moisture damage problems during reflow process.

• Baking process uses high temperature to dry PCBs and will cause breakdowns of protective coatings, lead oxidation, intermetallic buildup and reduces solder ability of circuit boards.

• Nitrogen and dry air purge is costly and will only force moisture from the storage cabinet providing a humidity controlled environment. Nitrogen purging will not dry or remove moisture that has absorbed into the moisture sensitive materials, components or devices.

• When components are removed from moisture barrier bags, Eureka’s ultra-low humidity storage cabinet will stop floor life clock for all IC packages such as:

Dual-in-line: flatpack, SOIC, SOJ, TSOP, SSOP, TSSOP, QSOP, VSOP, DFN
Quad-in-line: PLCC, QFP, LQFP, PQFP, CQFP, MQFP, TQFP, QFN, LCC, MLP, PQFN
Grid arrays: PGA, BGA, LGA, FBGA, LFBGA, TFBGA, CGA, CCGA, μBGA, LLP

• Drying and storage of multi-layer PCB and PWB before and after mounting, including dual side boards awaiting second side reflow.

• Moisture controlled storage with drying/desiccating capabilities for PCB pattern film/prepreg, quartz, fiber optics, CCDs, etc.

• PP plate (prepreg), Solder, Semi-mounted PCB, Mounted PCB, Die Cast & Mold compounds, Bonding materials, Fluorescence powder, LCG board, Wafer, CCD, Condenser, Oscillators, etc.​