PCBA Batch Cleaner

PCBA Batch Cleaner Description:

SD600 PCBA Batch Cleaner

Features

• 1、Visualization of the whole process:     Cleaning room equipped with visual window, cleaning process be clear at a glance ；

• 2 、The world‘s largest cleaning baskets:     645mm(L) ×560mm(W) × 200mm(H) 2 layer , Meet larger PCBA sizes and higher cleaning production ；

• 3 、The most scientific nozzle design (patent ):   Increasing nozzles from left to right---------Enhance the cleaning efficiency，Distribution nozzles up and down---------Completely solve the blind clean area；

• 4、Nozzle pressure adjustable design :   Solve the small size of PCBA in the cleaning process by spray under high pressure collision, splash  problem ；

• 5、With standard diluent slot heating system :   Greatly promoted cleaning efficiency. Shorten cleaning time; ；

• 6、Touch screen interface :    According to different PCBA model set with different process parameters, Quick edit and variety of different process parameters can be stored program, including: solvent temperature, cleaning time, rinse times/time, rinse temperature, dry time, drying temperature, conductivity monitoring parameters, etc... According to different permissions, operator, can be set password management authority

• 7、High standards of cleanliness:  Ion pollution completely accords with the 610D IPC - Ⅰ class standard (less than 1.5 ug/cm2, and the U.S. army standard of MIL28809 Ⅰ class standard ;

• 8、Convenient liquid add mode :  Can manual to join, also can set according to proportion (5% ~ 25%) automatic proportioning DI water and chemical fluid ;

• 9、Special spray tank and auxiliary heating system:  Spray liquid tank is storage liquid in cleaning and rinsing process ,inject liquid into spray tank by dilution tank and continue to heat ,through high pressure pump to spray out, spray liquid tank is storage DI-water in rinsing process ,and also through high pressure pump to spray, can be choose heating or not.

• 10、Lower running cost:  Built-in filter device can achieve solvent recycle, reduce solvent dosage, The end of the cleaning by compressed air recycling pipeline and pump residual liquid, it could be save 50% liquid.

• 11、The cleanness of real-time monitoring system: For monitoring cleaning effect, Resistivity meter can be set and the scope is 1MΩ－15MΩ；

• 12、More environmental friendly  and zero-emission :built-in rinsing liquid emissions filtering system: effective filter cleaning process to produce a variety of impurities, COD, BOD, PH reached safety environmental emissions.

Technical Data:
Clean Basket Size：Max 645mm(L) ×560mm(W) × 100mm(H)   2layers
Dilution Tank Capacity：Max 60L
Concentrate Tank Capacity :30L
Spray Tank Capacity: 17L
Cleaning method:360°Whirl/Ejection for cleaning; hot air for drying
Cleaning Time: 5~30 Minutes ( Reference )
Cleaning Liquid Isolation Time: 1~3 Minutes
Rinsing Tim:：1-2 Minutes ( Reference )
Rinsing Times:1-99次（Set）
Drying Time：20~40 Minutes ( Reference )
Cleaning Liquid Recovery Filter：1μm ( filter tiny impurities: solder paste, flux, rosin and pollutants )
Rinsing Liquid Discharge Filter：5μm ( filter tiny impurities: solder paste, flux, rosin and pollutants )
Dilution Liquid Heating Temperature：Room temperature～60℃
Drying Heating Temperature：Room temperature～90℃
Resistivity Meter Monitoring Range： 1MΩ～15MΩ
DI Water Supply：30～60L/min 
DI Water Pressure：≦0.4Mpa
DI Water Entrance Pipe Connection： 3/4 inch
Dilution Liquid Heating Power：9KW
Air Supply：0.45Mpa~ 0.7Mpa
Air Consumption：200-400L/Min
Power Supply：AC380V 50HZ   65A
Net Weight：600Kg
Exhaust Size：Φ100mm(W)×30mm(H)
Machine Size：1200mm(L) ×1000mm(W) × 1800mm(H)