Thermaltronics USA, Inc.

Manufacturer of a wide range of Soldering Products & Accessories used in the electronics manufacturing industry.

Manufacturer

Thermaltronics hand soldering products, which incorporate the unique Curie Heat Technology, for precise temperature control, include both 13.56 MHz and 470 KHz power supplies and are fully compatible with competitive product offerings.

Product design and development is undertaken in the USA and Australia, with final production taking place in a customised manufacturing facility, incorporating specialised equipment and in accordance with recognised international standards of quality and compliance.

In addition to the hand soldering product line, Thermaltronics also provides an extended range of accessories to support both production and rework applications. These products include, convection rework systems, IR underboard heaters, fume extraction, test equipment, solder wire feeders and tip cleaning systems.

Thermaltronics embraces both strict quality control and conformance with International Manufacturing Standards, is in compliance with ISO 9000 & ISO 14000 and holds certification in TuV, GS, NRTL & CE.

Product warranties are among the best in the industry and distribution of the company’s products is available worldwide.

Thermaltronics USA, Inc. Postings

17 products »

TMT-2000S Curie Heat Technology Soldering and Rework Station

The TMT-2000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....

Rework & Repair Equipment

TMT-2000S Curie Heat Technology Soldering and Rework Station

TMT-5000S Curie Heat Technology Soldering and Rework Station

The TMT-5000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....

Rework & Repair Equipment

TMT-5000S Curie Heat Technology Soldering and Rework Station

TMT-9000S Curie Heat Technology Soldering and Rework Station

The TMT-9000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material....

Rework & Repair Equipment

TMT-9000S Curie Heat Technology Soldering and Rework Station

TMT-R9800S Soldering Robot

The Thermaltronics Robotic System incorporates innovative design concepts and precision components to ensure accuracy. The combination of high precision hardware and intelligent software ensures precision soldering and low operator training costs....

Soldering Robots

TMT-R9800S Soldering Robot

AF-KIT Auto Solder Feeder Kit

Thermaltronics AF-KIT auto solder feeder kit provides for single handed operation during soldering applications. The kit is provided as an accessory to existing Thermaltronics hand soldering tools. Adjustable speed, feed length...

Rework & Repair Equipment

AF-KIT Auto Solder Feeder Kit

TMT-HA050 Hot Air Rework Tool

The TMT-HA050 hot air tool can be used for the removal of surface mount components such as SOIC, QFP, PLCC and other similar devices. The Thermaltronics TMT-HA050  hot air tool is a portable and flexible hot air rework s...

Rework & Repair Equipment

TMT-HA050 Hot Air Rework Tool

TMT-HA100 Hot Air Pencil

The TMT-HA100 hot air pencil is designed to remove and reflow small precision components, integrated circuits and other smaller devices. The Thermaltronics TMT-HA100 hot air pencil is a portable and flexible hot air rewo...

Rework & Repair Equipment

TMT-HA100 Hot Air Pencil

TMT-HA200 Hot Air Rework Tool

The TMT-HA200 hot air tool can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others. The Thermaltronics TMT-HA200 Hot Air Tool is a portable and flexible hot air rework syst...

Rework & Repair Equipment

TMT-HA200 Hot Air Rework Tool

TMT-HA300 Hot Air Rework Tool

The TMT-HA300 hot air tool uses a large diaphragm pump and can be used for surface mount component removal and reflow on components such as SOIC, CHIP, QFP, PLCC and others. The Thermaltronics TMT-HA300 Hot Air Tool is a portable...

Rework & Repair Equipment

TMT-HA300 Hot Air Rework Tool

TMT-HA600 Hot Air Rework Tool

The TMT-HA600 is suitable for the more difficult applications in the removal and reflow of surface mount components. The TMT-HA600 hot air tool uses a large diaphragm pump and a high power 1300W heater, designed to work on more difficu...

Rework & Repair Equipment

TMT-HA600 Hot Air Rework Tool

See all products from Thermaltronics USA, Inc. »

41 news releases »

Thermaltronics Embraces Strict Quality Control for Superior Solder Robots

Jun 24, 2022 | Thermaltronics USA, Inc. is pleased to announce that its solder robots go through extensive quality control procedures in order to maintain the company's position as the most awarded, accurate and versatile solder robot on the market.

LeeMAH Electronics Makes Thermaltronics TMT-9000S Its Soldering Iron Standard

Nov 29, 2021 | Thermaltronics USA, Inc. is pleased to announce that LeeMAH Electronics has made the TMT-9000s the standard soldering iron at its Dallas, TX facility. Additionally, PCBASupplies.com is the vendor of choice for their source. Scott Fillebrown, Principal at Southwest Systems Technology, Inc. was the manufacturers' representative.

Thermaltronics Recognized by GLOBAL Technology Awards for Dual Port Solder Station

Nov 22, 2021 | Thermaltronics USA, Inc. is pleased to announce that it received a 2021 GLOBAL Technology Award in the category of Soldering Robots for its TMT-2200S – "simultaneous" dual port operating solder station. The award was announced during a ceremony that took place Tuesday, Nov. 16, 2021 during productronica in Munich, Germany.

Thermaltronics Receives Award for Dual Port Solder Station during SMTA International

Nov 05, 2021 | Thermaltronics USA, Inc. is pleased to announce that it received a 2021 Mexico Technology Award in the category of Soldering Equipment for its TMT-2200S "simultaneous" dual port/heavy duty solder station. The award was announced at a ceremony that took place Wednesday, Nov. 3, 2021 during SMTA International in Minneapolis, MN.

Southwest Systems Technology to Demo Thermaltronics Robotic Soldering Systems at the SMTA Austin Expo

Oct 17, 2021 | Thermaltronics USA, Inc. announces that it will exhibit at the SMTA Austin Expo & Tech Forum with its representative Southwest Systems Technology, Inc. The event is scheduled to take place Tuesday, Oct. 19, 2021 at the Norris Conference Centers. Thermaltronics will highlight theTMT-2200S – "simultaneous" dual port operating solder station, TMT-R8000S Solder Robot and TMT-R9900S Inline Robot Soldering System.

Ed Zamborsky Joins Thermaltronics as Regional & Technical Support Manager

Oct 07, 2021 | Thermaltronics USA, Inc. today announced that it has hired Ed Zamborsky as Regional & Technical Support Manager, headquartered at its new facility in Ormond Beach, FL. A seasoned executive with 30 years' experience in the electronics industry, Zamborsky has a successful track record of growing businesses in diverse industrial and global electronics markets. He is a specialist in both automated and manual hand soldering and rework.

Thermaltronics Opens Second US Facility in Ormond Beach, FL

Sep 09, 2021 | Thermaltronics USA, Inc. today announced that it has opened its second facility in the US in Ormond Beach, FL. The new facility will feature a custom designed showroom for Thermaltronics solder robots as well as other soldering equipment. It is large enough to serve as future stocking location for US customers/distribution.

Thermaltronics to Demo Best-in-Class Robotic Soldering Systems at the SMTA Tampa Bay Expo

Sep 07, 2021 | Thermaltronics USA, Inc. announces that it will exhibit at the SMTA Tampa Expo & Tech Forum, scheduled to take place Tuesday, Oct. 5, 2021 in Tampa Bay, FL. Thermaltronics will highlight theTMT-2200S – "simultaneous" dual port operating solder station, TMT-R8000S Solder Robot and TMT-R9900S Inline Robot Soldering System.

Meet with Thermaltronics and Horizon Sales at the SMTA Wisconsin Expo

Sep 02, 2021 | Thermaltronics USA, Inc. announces that it will exhibit at the SMTA Wisconsin Expo & Tech Forum, scheduled to take place Tuesday, Sept. 14, 2021 in Milwaukee, Wisconsin. In partnership with its representative Horizon Sales, Thermaltronics will highlight theTMT-R8000S Solder Robot, TMT-R9900S Inline Robot Soldering System and TMT-2200S – "simultaneous" dual port operating solder station.

Thermaltronics Appoints Horizon Supply Group as Distributor

Mar 02, 2021 | Thermaltronics USA, Inc. is proud to announce the appointment of Horizon Supply Group as its newest distributor.

31 more news releases from Thermaltronics USA, Inc. »

Inline Cleaning Machine Hydro-clean Array

Software for SMT