Panasonic NPM-TT2 twin tray assembly platform chip mounter
Company Information:
Name: |
Panasonic NPM-TT2 twin tray assembly platform chip mounter |
Category: |
|
Offered by: |
|
Panasonic NPM-TT2 twin tray assembly platform chip mounter Description:
Panasonic NPM-TT2 twin tray assembly platform chip mounter
Basic Specification
Direct connectivity with NPM-D3/W2
Placement head (Lightweight 8- nozzle head & 3-nozzle head V2)
Selectable & configurable supply unit spec
Adoption of Multi Recognition Camera
Alternate & independent mounting support
Changeover capability
Multi Recognition Camera
High productivity through fully independent placement
Support Pin Automatic Change (option)
Productivity/Versatility
Feeder cart changeover spec（option）
Inspection option before pick-up
Transfer Unit（option）
|
Model ID |
NPM-TT2 |
||
|
PCB |
PC size |
Single-lane mode |
L 50 x W 50 ~ L 510 x W 590 |
|
Dual-lane mode |
L 50 x W 50 ~ L 510 x W 300 |
||
|
M size |
Single-lane mode |
L 50 x W 50 ~ L 510 x W 510 |
|
|
Dual-lane mode |
L 50 x W 50 ~ L 510 x W 260 |
||
|
PCB exchange time |
Single-lane mode |
4.0 s (With no component mounted on the reverse side of PCB) |
|
|
Dual-lane mode |
0 s* *No 0s when cycle time is 4.0 s or less |
||
|
Electric source |
3-phase AC 200, 220, 380, 400, 420, 480 V 2.5 kVA |
||
|
Pneumatic source |
Min.0.5 MPa, 200 L /min (A.N.R.) |
||
|
Dimensions *1 (mm) |
W 1 300*2 x D 2 798*3 x H 1 444*4 |
||
|
Mass |
2 690 kg |
||
|
Placement head |
Lightweight 8-nozzle head |
3-nozzle head V2 *5 |
|
|
Placement speed |
PC size |
18 000 cph (0.20 s/chip) |
7 200 cph (0.50 s/chip) |
|
M size |
17 460 cph (0.21s/chip) |
6 984 cph (0.52 s/chip) |
|
|
Placement accuracy |
± 40 µm/chip |
±40 μm/ chip |
|
|
Component |
0402 chip*6 to L 32 x W 32 x T 12 |
0603 chip to L 150 x W 25 (diagonal152) x T 30 |
|
|
Component |
Taping |
Tape : 4 to 56 / 72 mm |
Tape : 4 to 56 / 72 / 88 / 104 mm |
|
Specifications for front/rear tray feeders : Max.52 |
|||
|
Stick |
Specifications for front/rear tray feeders : Max.12 (Single stick feeder) |
||
|
Specifications for front/rear feeder carts : Max.28 (Single stick feeder) |
|||
|
Tray |
Max.40 (Front supply unit : Max. 20 + Rear supply unit : Max. 20) |
||
1)
12mm to 
32mm
12mm Under*1 : Only for main body
*2 : 1 820 mm in width if extension conveyors (260 mm) are placed on both sides
*3 : Dimensions shown are specifications for front/rear tray feeders . Dimensions of specifications for front/rear feeder carts : 2 893 mm
*4 : Excluding the monitor, signal tower and ceiling fan cover.
*5 : 3-nozzle head V2 cannot be installed on NPM-D3
*6 : The 0402 chip requires a specific nozzle/feeder.
*Placement tact time, inspection time and accuracy values may differ slightly depending on conditions.
*Please refer to the specification booklet for details.
Keywords:
Panasonic pick and place machine, Panasonic CM202, CM202,Panasonic placement machine, Panasonic chip mounter, Panasonic chip shooter, Panasonic smt machine, Panasonic smd machine, smt machine, smt pick and place machine, smd pick and place machine, surface mount technology, second-hand CM202, second hand Panasonic pick and place machine, second-hand Panasonic chip mounter, used Panasonic machine, used chip mounter...NPM-TT2
The other machines you might looking for:
Lead free reflow oven, solder paste printer, pcb linking conveyor, solder paste inspection machine, assembly line, wave solder...
Contact:
Elaine
Tel: 86-755 -29605790
Wechat: czsffy1223
QQ: 2277025763
Skype: elaine19920114
Phone: 86-18898671670 / 86-15811817234
E-mail: elaine@smdmachine.com / smttechpnp@gmail.com
Address: Shenzhen/Zhongshan, Guangdong Province, China
http://www.smdmachine.comPanasonic NPM-TT2 twin tray assembly platform chip mounter was added in Oct 2018
Panasonic NPM-TT2 twin tray assembly platform chip mounter has been viewed 531 times
20 More Products from Langke Automation Equipment(smdmachine.com) :
.jpg)
 自动带式二极管成型机（K型）.jpg)
