SMT Equipment

Custom Reflow Oven M8

Custom Reflow Oven M8

Custom Reflow Oven M8

Name:

Custom Reflow Oven M8

Category:

Reflow

Offered by:

Flasonsmt Co.,ltd

   

Custom Reflow Oven M8 Description:

Custom Reflow Oven M8

  • Name: SMT Reflow Oven
  • Heating zones: 8
  • Heating method: Hot Air
  • Usage: SMT Assembly line
  • Product description: Custom Reflow Oven M8
  •  INQUIRY

Custom Reflow Oven M8

Product Specifications:

Custom Reflow oven means that we can produce the Reflow oven according to your special requirement. Like the heating zones, we can produce 8,10,12,14,16,18 heating zones reflow oven for you. the heating zones can add nitrogen operation or not. We can print your logo and the Reflow oven surface,  if you have any other special requirement, just tell us, our engineer will help you find the right solutions.

Characters:

No.1 The unique advanced long life heating system

1. The heating system adopt the Swedish nickel heater with efficiency and energy-saving. The peak wave length of the radiation power is 4UM with curved surface reflector enhance temperature ramp up speed, improve the thermal efficiency. And the special forced-air circulation system make PCB and the component uniformly heated and eliminate the "shadow effect" efficiently.

2. Using special high temperature resistant protection material in heating preservation structure and cast iron in heating passage.

3. Using imported Taiwan SanYue long shaft high temperature blower motor and W shaped heat duct, critical design for no noise or vibration and convenient for maintenance .

4. Heating zones are structured with porous aluminum air director, hot air is uniformly distributed to the PCB surface. Hood can open completely so as to easily proceed maintenance.

No.2 Smooth and reliable transmission system

1. The conveyor driving system use STK adjustable speed motor imported from Taiwan matched with the 1:150 turbine reducer can running extremely stable, speed range can varies between 0-1500mm/min.

2. Independent roller structure support and mesh belt running smooth and the speed precision is up to ±20 mm/min .

3. Mesh belt: durable and wear-resistant, not easy to deform and long life.

No.3 Stable and reliable electrical control system

1. It adopts imported thermostat control which owns fuzzy logic and PID closed loop control system. It can quick response to the changes in heating condition and ensure efficient heat compensation to achieve required temperature.

2. Using thermocouple imported from Taiwan to every heating zone, it can rapid feedback changes in each temperature zone, real-time monitoring to maintain the temperature in each zone.

3 .Special SSR solid state relay matched with dedicated heat dissipating block prolong the lifetime effectively. No contact output and fuzzy control function by thermostat, can monitoring the changes of environmental temperature and calorific value, applying the heating device by minimum pulse, ensuring the high precision of the temperature control & uniform temperature within zones. The zone length, flow direction, temperature distribution, all these are meet with IPC standards.

4. Powerful heating elements, heat up fast, it’s only need approx. 20 minutes from room temperature to set-point temperature.

5 .Failure diagnosis, visual & audio alarm.

6. Delay shutdown production function, uniform cooling after the shutdown: prevent hard-wares from any thermal damaged.

Specification:

Model

Flason M8

Heating System

Number of heating zones

Top 8/Bottom 8

Heating passage

2900MM

Heating style

hot air

Cooling style

Force air

Conveyor System

Max. Width of PCB

350mm

Mesh belt width

400mm

Conveyor Direction

L-R(or R-L)

Process Height

880±20mm

Conveyor type

Mesh and chain

Range of rail width

0-300mm

Conveyor speed

0-1500mm/min

Auto/manual Lubrication

standard

Hood opening

Manual(option: auto)

Fixed track

Front track fixed(option: rear track fixed)

Product clearance

Top and bottom 25mm

Control system

Power supply

5line 3phase 380V 50/60Hz

Total power consumption

40kw

Startup consumption

38kw

Steady consumption

4KW

Ramp up time

About 20 mins

Temp. set-point range

Room temperature-300°C

Temp. control method

PLC & PC

Temp. control precision

±1°C

Temp. deviation on PCB

±2°C

Data storage

Process Data and status storage(80GB)

Nozzle plate

Aluminum Alloy Plate

Abnormal Alarm

Abnormal temp. (over-temp/low temp.)

Board dropped alarm

Tower light: Amber-warming, Green-normal, Red-abnormal

General

Dimension(L*W*H)

4400×1100×1490mm

Weight

1000KG

Color

Computer gray


Keywords:

SMT Reflow Oven Lead free Reflow Oven Reflow Soldering Oven Reflow Oven Manufacturer LED Reflow Oven PCB Reflow OvenNitrogen Reflow Oven Dual Rail Reflow Oven China Reflow Oven

Flason Electronic Co.,ltd provide a full SMT Spare parts solutions, including SMT Feeder, SMT Nozzle, SMT Control Card, SMT Motor, SMT Laser | Sensor, SMT Feeder Storage Cart, SMT Servo driver, SMT Solenoid Valve, SMT Filter, SMT Feeder parts, Chip mounter Parts, SMT Equipment etc. If there's any kind SMT Spare parts you may need, please contact us for more information: wechat whatsapp:0086 13538047679, Skype: flasonsmt, Email: sales3@flason-smt.com.

  
FAQ
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. Gold supplier on Alibaba !
B. Trade assurance to US$54,000 !
C. Best price & Best shipping & Best service ! 

CONTACT US

Contact: Andy

Phone: +86 13538047679

Tel: 0755-85225569

Email: sales3@flason-smt.com

Add: No.94, Guangtian Road, Songgang Street, Bao`an District Shenzhen

When SMT matters to your business, partner with FLASON. Where innovation takes form. GuangDong ICP: 19148863 Sitemap

SMT Reflow Oven Pick and Place Machine SMT Stencil Printer Panasonic Feeder JUKI Feeder Samsung Nozzle SMT Reflow Oven
Wave Sodlering Machine Pick and Place Machine SMT Stencil Printer SMT Reflow Oven Wave Soldering Machine SMT Reflow Oven JUKI Nozzle
JUKI Feeder SMT Reflow Oven SMT Feeder SMT Nozzle Samsung Feeder SMT Assembly line Reflow Oven JUKI Feeder Wave Soldering Machine
Pick and Place Machine SMT Assembly Line SMT Reflow Oven Manufacturer Samsung Feeder JUKI Feeder SMT Reflow Oven Wave Soldering Machine

Custom Reflow Oven M8 was added in Jul 2020

Custom Reflow Oven M8 has been viewed 30 times

20 More Products from Flasonsmt Co.,ltd :

Comprehensive Analytical Services and Support

Electronics Equipment Consignment