High Speed Panasonic Screen Printer Spg
Company Information:
Name: |
High Speed Panasonic Screen Printer Spg |
Category: |
|
Offered by: |
|
High Speed Panasonic Screen Printer Spg Description:
SFG Electronic Technology Co.,Limited
Contact:Andy Tung
Cell Phone/WhatsApp/Wechat:+86 13751093139
Skype:kelvin-andy
Features that enable high productivity and stable quality
Hybrid squeegee head
Hybrid squeegee head, which has a good track record with our highly functional models, is equipped as standard.
Together with stabilizing rolling solders, printing cycle time is reduced.
High-speed mask cleaning
New-type cleaning mechanism reduces paper consumption. Moreover, parallel processing of transfer and cleaning cuts back loss time.
3 conveyors equipped
3 conveyors are equipped as standard for shorter PCB exchange time.
(supported PCB length up to MAX 350mm)
Various options to realize productivity/quality improvement and labor savings
Perforated pot type automatic solder supply
Automation of solder supply allows for labor savings and uninterrupted operation.
Maintenance-free
Cleaning of spatulas/nozzles is unnecessary
Reduction of discarded solder
e.g., solder attached on spatulas or inside nozzles
Uninterrupted operation
2-pot-type continuous supply
Sealed head
Press-fit of solder becomes possible, allowing fine pitch/through hole printing.
PCB pickup blower (switch type)
Printing transcription is improved through the use of blower to create airflow pathways from metal mask to PCB.
One-touch support pins
Support unit for batch replacement.
While checking on PCB, you can set magnet pins at desired locations.
Automatic mask positioning
Based on PCB data, the Y-directional mask position is automatically registered.
M2M Line solution
According to the correction data of shifted printing positions analyzed by solder paste inspection (APC correction data), it corrects printing positions(X ,Y ,θ).
*3D inspection equipment of other companies can also be connected.
* Please inquire with your sales representative for more details
Connect with upper system(LNB,LWS…)
• Automatic changeover
• Component verification(solder/mask/squeegee…)
• Trace data output
*About the specification and system configuration,please refer to the"Specification"for details.
| Model ID | SPG |
| Model No. | NM-EJP6A |
| PCB dimensions (mm) | L 50 x W 50 to L 510 x W 460 |
| PCB exchange time | 6.5 s (incl. PCB recognition) (when PCB is L350 x W300 ) *1 |
| Repeatability | 2Cpk ±5.0μm 6σ (±3σ) |
| Screen frame dimensions (mm) | L 736 x W 736, L 650 x W 550, L 600 x W 550*2 |
| Electric source | 1-phase AC 200, 220, 230, 240 V ±10V 1.7 kVA*3 |
| Pneumatic source | 0.5 MPa, 30 L/min (A.N.R.), (motor vacuum spec), 400L/min (A.N.R.) (ejector vacuum spec) |
| Dimensions (mm) | W 1 580 x D 1 800 *4 x H 1 500 *4 |
| Mass | 1 500 kg*5 |
*1: PCB exchange time varies depending on the machine in the pre-process and the post process, the PCB size, the use of a PCB pressing-down unit and so forth.
*2: For mask specifications, please see the specification.
*3: Including blower and vacuum pump"Option"
*4: Except for the signal tower and the touch panel.
*5: In case of full options
*Values such as cycle time and accuracy may vary depending on operating conditions.
*Please refer to the ''Specification" booklet for details.
High Speed Panasonic Screen Printer Spg was added in Jun 2020
High Speed Panasonic Screen Printer Spg has been viewed 135 times
17 More Products from SFG Electromechanical Equipment Co.,Limited :
