SMT Equipment

pgb-5100 led strip silicone dispensing machine,meter mix dispenser for led light

pgb-5100 led strip silicone dispensing machine,meter mix dispenser for led light

pgb-5100 led strip silicone dispensing machine,meter mix dispenser for led light

Name:

pgb-5100 led strip silicone dispensing machine,meter mix dispenser for led light

Category:

Dispensing

Offered by:

Guangzhou Daheng Automation Equipment Co.,LTD

   

pgb-5100 led strip silicone dispensing machine,meter mix dispenser for led light Description:

Automatic epoxy resin ab glue dispensing machine for LED soft rope light strip

Product Application

Widely used in LED lighting modules, LED display, LED flood lights, LED soft and hard light strips, fluorescent lamps, wall washers, waterproof power supplies, resistors, capacitors, photo albums, and other products.

Introduction :

1. Working Area: 400x5000x30/80mm

2.Application products: LED flexible strip

3.High precision valve: high speed, glue off clean, no glue drawing, no dropping.

4. Gear pump

5. Mix glue A & B more evenly; no more or no less for agent B.

Name: Fully Automatic Glue Dispensing Machine

Model: PGB-5100 Advised Glue: two-component silicone, epoxy, PU, etc.

Ratio: 1:1 to 10:1 adjustable

Glue Color: transparent

Glue Type: no additives inside

Application: LED flexible strip 5m long Machine

Type: special for LED Strip 5m

Tech Data:

1.Gluing Speed: 0.2-12g/S

2.Repeatability: +/-1%

3. Glue Ratio: 1:1 to 10:1 adjustable

4. Tank Capacity: 10L, 25L, 40L available

5. Size: L6000xW1200xH1500mm

6. Weight: 810kg

7. Power: 1.5-3kw, Voltage: 220V & 380V optional

8. Air Pressure: 0.5-0.65MPa ( 5-6.5kgf/ cm2 )

1. High ratio between the base agent and hardener, ( the most common ratio is 10:1);

2. Transparent.

3. Need to vacuum to remove the air bubble inside

4. Not easy to mix the two components evenly.

5. Running Path is long. Have special requirement on metering pump.

1. Gluing Effect: high evenness; can not be rugged;

2. High precision for mixing of glue A and glue B. ( Glue B can not be more or less than required quantity)

3. Thickness of Glue: must be suitable.

4. Position: the nozzle must focus on the middle of PCB bar.

5. Capacity must meet up the customer’s requirement.

III.Specification:

Model No:

pgb-5100

Mixing Ratio

100:100-10:100(1:1-1:10) Adjustable

Metering precision

±1%

Outflow speed

1g/sec-15g/sec

Mixing precision

±1%

Mixing mode

Dynamic mixing /Static mixing

Glue Viscosity

Lower than 20000 CPS(mPa·s)

Control mode

PLC + Touch Screen

Control system

Independent R&D

Measuring mode

Stepping motor/High-precision, wear-resistant,long-life Gear pump

Working voltage

AC 220V 50Hz/60Hz

Power requirement

3.55KW

Air pressure requirement

4.5-8KG

Machine Dimension

1500(L)*1200(W)*1500(H)mm

Weight

approx 260 KG

Work environment

Humidity: 20%~98%RH; Temperature: 0~+40°c

Suitable Material: For waterproof, adhesive, fixed two-component adhesive.

Such as: Crystal or less additive glue --Silicone, epoxy, polyurethane(PU), etc.

Applications:LED products ,Crafts,Electronic components

Such as:Wall washer light, LED bar, LED strip, Ads module, Sensor, Photovoltaic module, Photovol­taic inverter .etc

Application

pgb-5100 led strip silicone dispensing machine,meter mix dispenser for led light was added in Nov 2021

pgb-5100 led strip silicone dispensing machine,meter mix dispenser for led light has been viewed 62 times

19 More Products from Guangzhou Daheng Automation Equipment Co.,LTD :

IPC Training & Certification - Blackfox

Fluid Dispensers