VGB-450 Daheng Under vacuum potting sytem

VGB-450 Daheng Under vacuum potting sytem Description:

By potting under vacuum, components can be optimally protected from external influences. Before the potting process, air and moisture are removed from the components by vacuum. Components with geometries that are difficult to vent, coils, transformers or wound goods can be potting free of air bubbles. Potting under vacuum guarantees an even distribution of the potting material.

Automotive ignition coils, sensors or small transformers – we develops vacuum shot dosing systems for the highly precise potting of electronic components under vacuum. The partially or fully automatic special potting casting equipment can either be integrated into an existing production line  

1.11 Basic Parameter of the equipment .

Power: mixing machine-8KW vacuum machine-2KW

Three axis: X*Y*Z(mm):400x400x70

Weight: 650kg

Input pressure:AC220V 10,50 HZ

Input air pressure :0.5MPa—0.65MPa(5—6.5kgf/cm2)

Repeat accuracy: equipment movement 0.2mm;Glue output: 0.2g

displacement velocity (Max) : X 250mm /s, Y 250mm /s, Z 100mm /s

Dimensions: about 1750mm x 1700mm x 1650mm

Fully automatic Vacuum glue potting machine integrated with material feeding , glue potting and finished product convoying functions to one equipment , the machine made up with fully automatic mixing machine , vacuum three axis glue dispenser,Chain conveyor line and so on .This equipment can be used independ or be connected with digital data and apply glue potting under negative pressure and normal pressure . It is widely apply for silicone , epoxy , EAW2777,Crystal glue , PU(poluyrethane) two component glue , which is suitable for different glue potting process requirements.

1.1 Product feed in and out automatically  

1.2 Glue processing (tank stir , tank bubble degas , heating , filter , vacuum degas)

1.3 Glue ratio and quantify mixture .

1.4 Glue mixing evenly .

1.5 Through programming to realize glue potting for different products sizes .

1.11 Basic Parameter of the equipment .

Power: mixing machine-8KW vacuum machine-2KW

Three axis: X*Y*Z(mm):400x400x70

Weight: 650kg

Input pressure:AC220V 10,50 HZ

Input air pressure :0.5MPa—0.65MPa(5—6.5kgf/cm2)

Repeat accuracy: equipment movement 0.2mm;Glue output: 0.2g

displacement velocity (Max) : X 250mm /s, Y 250mm /s, Z 100mm /s

Dimensions: about 1750mm x 1700mm x 1650mm

2,Parameter

The main part of Vacuum Chamber Potting machine comprize with glue tank , mixing system (screw pump),mixing /clean system , control system and so on .3, Main part introduction

3.1 Glue storage tank

As per glue feature and customer’s process , glue should be preprocessing before metering .

3, Main part introduction

The main part of Vacuum Chamber Potting machine comprize with glue tank , mixing system (screw pump),mixing /clean system , control system and so on .

3.1 Glue storage tank

As per glue feature and customer’s process , glue should be preprocessing before metering .

AB component glue through suck back valve and come into mixing tube , like picture. The mixture finally be potting to products . When finished glue potting , the sucking valve can provent glue from dropping immediately to provent glue from dropping to other place.

3.4 Operation Controlling System .

3.4.1 Glue-out amount is pushed out by motor pushing rod metered by controlling the speed of pushing motor.

3.4.2 Adjustable glue-out synchronization , make sure A/B glue flow out of the valve at the same time gel resistance timmer to provent glue from curring .