Panasonic Radial Inserter RL131

Company Information:

Our company has a senior professional sales team to provide customers with a full range of pre-sales technical support and the sale of new imported complete machines. Our company has a large number of Panasonic engineers,

Shenzhen, China

Manufacturer

13691605420

See Supplier Website »

Company Postings:

(2728) products in the catalog

Name:	Panasonic Radial Inserter RL131
Category:	Through-Hole
Offered by:	Fomyn Equipment co,.ltd

Panasonic Radial Inserter RL131 Description:

Panasonic Radial Inserter RL131

PCB dimensions: MAX. 508 x 381MM
Max.speed: 0.17 s/component
Model No.: NM-EJR1A, NM-EJR2A
Insertion direction: 4 directions (0 °, 90 °, 180 °, -90 °)

INQUIRY

Panasonic Radial Inserter RL131

Specifications:

1. The operating rate is improved by using the component supply sequencer method.

● In addition to the maximum insertion speed of 0.17 sec/dot, since the component supply unit is fixed, it is only necessary to consider the moving distance of the XY table.

● NC data, which reduces speed loss and enables high-speed inserts for radial components.

● It is also possible to exchange components during operation, and it is possible to reduce the loss of equipment when the components are supplied.

2. The component supply unit 2 division method enables multiple operation modes.

● In the operation mode, four devices operating in the exchange mode are used as the operation mode to avoid electronic components.

● Improve productivity by reducing the situation and reducing the loss of electronic components.

Model	Panasonic Radial Inserter RL131
Item	Details
Power supply	Rated voltage Frequency Rated capacity	3-phase 200 / 220 V ± 10 V selectable 380 / 400 / 420 / 480 V ±20 V selectable 50 / 60 Hz Approx. 3.5kVA
Air supply	Supplied air pressure Min. 0.45 MPa to Max. 0.8 MPa (Operation air pressure: 0.45 ~ 0.5 MPa) Supplied air mass Approx. 80 L / min. (A.N.R) Note: Quick coupler attached (SMC KK13P-03M, KK13S-03F).
Dimensions	NM-EJR1A NM-EJR2A	W3,200 ´ D2,417 ´ H1,575 mm (Not including signal tower) W3,200 ´ D2,417 ´ H1,575 mm (Not including signal tower)
Mass	NM-EJR1A NM-EJR2A	Approx. 2,250 kg (main body only) Approx. 2,350 kg (main body only)
Environmental requirements	Ambient temperature 20°C ± 10°C
Operating controls	Interactive operation via color LCD touch screen (Front and Rear: Standard equipment) English/Japanese/Chinese selectable with a single button Recognition screen (displays the recognized board image on a superimposed window) Hierarchical menu (Operator/Engineer) I/O functions 3.5-inch FDD and SD card slot (standard equipment) Communication RS-232C
Coating color	Standard color	White: W-13 (G50)

Basis Optreden

Item	Details
Insertion tact time	Max. tact time: Approx. 0.17 s/point (0.20, 0.25, 0.36, 0.45 s/point changeable) 0.25 s/point conditions REMARKS 1 X-Y table movement at the tact time of 0.17 s/point: Within 35 mm Insertion direction: 0°, 90°, -90° (180°: 0.36 s/point) 2 The tact time above is enabled only when components are continuously taped. (Tact time varies if there are missing portions.) 3 Tact time varies between the beginning and the last of the insertion. 4 Tact time varies when new components are inserted for recovery. 5 Tact time varies also if 10 or more feeders are operated at a time due to the NC data setting. 6 Tact time must be set between 0.25 and 0.45 s when inserting components more than 12 mm in diameter or more than 18 mm in height
Applicable components	Insertion pitch: 2.5 and 5.0 mm Height: Hn = Max. 21 mm Diameter: D = Max. 13 mm Resistors, electrolytic capacitors, ceramic capacitors, LEDs, transistors, filters and resistor networks
Component packaging	Taping (in pack or reel) REMARKS Component pack must be lower than 360 mm and width less than 62 mm. Component reel must be up to 360 mm in diameter and 62 mm in width. Bracket and reel shaft are required. Cannot be used on the upper stage of the supply unit.

PCB replacement time	Approx. 2 s to 4 s (Ambient temperature: 20°C): REMARKS PCB replacement time only includes time for loading. It takes approx. 4 to 5 seconds including the table return time.
Applicable PCB	Demensions Min. 50 ´ 50 mm to Max. 508 ´ 381 mm Width-to-length ratio: Width should be equal to or less than length. Consult us for boards having width longer than length. Allowable insertion area Min. 50 ´ 40 mm ~ Max. 508 ´ 371 mm Thickness 1.6 mm ± 0.15 mm (for standard specification) REMARKS Boards of thickness from 0.6 mm (min.) to 2.0 mm (max.) are applicable. Even if the board thickness is within the above range, clinched angle of the inserted lead or lead length may vary, or board transfer error may occur depending on the shapes of board or insertion holes. Please contact us in advance. Mass Max. 1 kg per board including inserted components. Flow direction Right to left (Standard) or Left to right Board positioning method Pin positioning (Standard, without positioning in the Y direction), REMARKS Contact us separately for edge positioning.
Insertion pitch	2-pitch specification 2.5 mm and 5.0 mm, or 2.54 mm and 5.08 mm
Insertion direction	4 directions (0°, 90°, 180° and -90°)
Anvil	Cutting & Clinch type system (Piezoelectric detection system)
No. of component inputs	NM-EJR3A 40 types NM-EJR4A 80 types