Philips Topaz
Model: |
Philips Topaz |
Category: |
|
Condition: |
|
Location: |
Netherlands |
Offered by: |
|
Contact Supplier |
Tact time: 0.20sec/chip with line array camera Simultaneous pick with 8 heads
0.45 sec/SO with line array camera Simultaneous pick with 4 heads
1.4 sec/QFP with line array camera Sequential pick with 4 heads
3.7 sec/QFP with area CCD camera In fine mode with 1 head
Optimal placement rate: 18,000 cph Simultaneous pick with 8 heads
Nominal placement rate: 12,000 - 14,000 cph
Applicable components: 0201 - SOP, SOJ, PLCC 32mm (1.26")
6mm - QFP 32mm (1.26") with pin pitch down to 0.5mm
(20 mil)
Dark background BGA, μBGA, CSP with regular pitches;
6mm - 32mm: Min. ball pitch down to 0.75mm (31mil), Min.
ball diameter down to 0.3mm (12mil)
Line array camera system
6mm - QFP 32mm (1.26") with pin pitch down to 0.4mm
(16 mil)
Dark background BGA, μBGA,CSP with regular pitches;
6mm - 32mm: Min. ball pitch down to 0.75mm (31mil), Min.
ball diameter down to 0.3mm (12mil)
Optional 32mm area CCD
camera system with fore and
side illumination unit
Mounting accuracy:
(X,Y) 3s
± 75μ for chips and SOIC
± 60μ for QFPs (6mm - 32mm 1.26") with pin pitch down to
0.5mm (20 mil)
Line array camera system
(all placement heads and all
placement angles)
± 35μ for QFPs (6mm - 32mm 1.26") with pin pitch down to
0.4mm (16 mil)
Optional area CCD camera
system (in fine mode)
Mounting accuracy:
(j) 3s
For Chips and SOIC this is Lead dependent
± 0.6º for QFPs (6mm - 32mm 1.26") with pin pitch down to
0.5mm (20 mil)
Line array camera system
(all placement heads and all
placement angles)
± 0.09º for QFPs (6mm - 32mm 1.26") with pin pitch down
to 0.4mm (16 mil)
Optional area CCD camera
system (in fine mode)
Mounting angle: 0 up to 360 (programmable in steps of 0.01)
Mounting repeatability:
3s
X, Y 30μ for QFPs (6mm - 32mm 1.26") pitch 0.4 Phi (0.09º)
Number of heads: One single beam with 4 Flying Nozzle change heads and 4
standard heads
The Standard heads can
exchange nozzles with the use of
the optional Nozzle Exchange
Station
Alignment system: One line array camera with fore and side illumination system for
Vision on the Fly using the VICS 2500 processing system
Standard, second line array
camera is optional
Area CCD camera for QFP 32mm (1.26") with pin pitch
down to 0.4mm (16 mil)
Optional
Moving CCD camera for Fiducial alignment StandardTact time: 0.20sec/chip with line array camera Simultaneous pick with 8 heads
0.45 sec/SO with line array camera Simultaneous pick with 4 heads
1.4 sec/QFP with line array camera Sequential pick with 4 heads
3.7 sec/QFP with area CCD camera In fine mode with 1 head
Optimal placement rate: 18,000 cph Simultaneous pick with 8 heads
Nominal placement rate: 12,000 - 14,000 cph
Applicable components: 0201 - SOP, SOJ, PLCC 32mm (1.26")
6mm - QFP 32mm (1.26") with pin pitch down to 0.5mm
(20 mil)
Dark background BGA, μBGA, CSP with regular pitches;
6mm - 32mm: Min. ball pitch down to 0.75mm (31mil), Min.
ball diameter down to 0.3mm (12mil)
Line array camera system
6mm - QFP 32mm (1.26") with pin pitch down to 0.4mm
(16 mil)
Dark background BGA, μBGA,CSP with regular pitches;
6mm - 32mm: Min. ball pitch down to 0.75mm (31mil), Min.
ball diameter down to 0.3mm (12mil)
Optional 32mm area CCD
camera system with fore and
side illumination unit
Mounting accuracy:
(X,Y) 3s
± 75μ for chips and SOIC
± 60μ for QFPs (6mm - 32mm 1.26") with pin pitch down to
0.5mm (20 mil)
Line array camera system
(all placement heads and all
placement angles)
± 35μ for QFPs (6mm - 32mm 1.26") with pin pitch down to
0.4mm (16 mil)
Optional area CCD camera
system (in fine mode)
Mounting accuracy:
(j) 3s
For Chips and SOIC this is Lead dependent
± 0.6º for QFPs (6mm - 32mm 1.26") with pin pitch down to
0.5mm (20 mil)
Line array camera system
(all placement heads and all
placement angles)
± 0.09º for QFPs (6mm - 32mm 1.26") with pin pitch down
to 0.4mm (16 mil)
Optional area CCD camera
system (in fine mode)
Mounting angle: 0 up to 360 (programmable in steps of 0.01)
Mounting repeatability:
3s
X, Y 30μ for QFPs (6mm - 32mm 1.26") pitch 0.4 Phi (0.09º)
Number of heads: One single beam with 4 Flying Nozzle change heads and 4
standard heads
The Standard heads can
exchange nozzles with the use of
the optional Nozzle Exchange
Station
Alignment system: One line array camera with fore and side illumination system for
Vision on the Fly using the VICS 2500 processing system
Standard, second line array
camera is optional
Area CCD camera for QFP 32mm (1.26") with pin pitch
down to 0.4mm (16 mil)
Optional
Moving CCD camera for Fiducial alignment Standard
Excellent condition, only 18000 hours of operating time.