AMP Amp-O-Lectric Model G Terminating Machine
Model: |
AMP Amp-O-Lectric Model G Terminating Machine |
Category: |
|
Condition: |
|
Location: |
Texas, USA |
Offered by: |
|
| Contact Supplier |
AMP Amp-O-Lectric Model G Terminating Machine
Brand: AMP
Model: Amp-O-Lectric Model G
Type: Terminating Machine
Serial #: 158189
Year: N/A
The Model “G” is the most advanced design in the long-standing series of AMP-O-LECTRIC machines for terminat- ing wire using reeled terminals and con- tacts. It features a reliable direct motor drive system. Its modular construction also enables us to provide versions for use either as bench-top units, or in com- bination with fully-automatic lead-mak- ing equipment. For operator convenience, we’ve improved access to, and lighting in the target area, and moved the Crimp Quality Monitor (CQM) to eye level for bench-top use. The Model “G” is also quieter, plus improved guarding meets applicable European and domestic safe- ty requirements. All Model “G” versions include precision adjustment for crimp height — an impor- tant feature, which, in combination with the optional CQM, will enable you to maintain the tight tolerances required for today’s demands for higher levels of quality. By simply resetting a dial, an operator can adjust crimp height in .0005 [0.013] increments over a .018 [0.457] range. When used with CQM, automatic adjustment is also available. Another user-friendly feature is its con- trol system. At the push of a button, you can power the motor on or off, jog for- ward or reverse, switch to split-cycle operation, turn the work light off or on, power the air feed on or off, or reset the batch counter. And, it’s all reported on an LCD display. The controls will also detect and report errors in the machine, and stop cycling when a bad crimp is detected by the CQM. The operator must then push the reset button to continue. The Model “G” will accept all existing TE miniature applicators, with minor modifi- cations. See Applicator Instructions 408- 8053, Conversion Guide for TE Miniature Quick-Change Applicators, for details. Most of our existing applicators may be used for crimp quality monitoring on versions equipped with CQM and CQM G-Adapter. To use CQM for Tab-Lok, FASTON flag terminals, a CQM hinge-bar applicator is required. You can’t use CQM to monitor the application of closed-barrel pre-insulated terminals.
Specifications:
Applicator 466168-1-G included
Company Information:
