Dec 21, 2017 | PNC Inc. has recently come to an agreement with MIRTEC to purchase the MV-6 OMNI 3D AOI System. To be used in their assembly division, this purchased has bolstered their state-of-the-art equipment list even further.
Jun 22, 2017 | This 2000L 2LE model is capable of imaging a maximum size 24” x 24” PC board or film size. With any large format film, positional accuracy can be a challenge but the Miva’s dynamic scaling feature can increase accuracy to minimize tolerance build-ups during the imaging process. Due to Miva’s optical registration system, innerlayer drill break-out will be reduced considerably on densely routed signal layers which will significantly improve yields. For sub-20-mil pitch parts or micro BGAs, a 2−3 mil solder dam will be possible to eliminate bridging during the assembly process.
Jun 21, 2017 | PNC Inc. recently launched their Design Webinar Series. In an attempt to inspire designers, engineers and everyone else to create new and revolutionary products, this webinar series will take the viewer on a step-by-step journey of how to design your product, bring it to market and tackle all the challenges that will be faced along the way.
Apr 17, 2017 | This year, receive complimentary attendance courtesy of PNC Inc.
Apr 07, 2017 | Accurate Engineering Inc. recently purchased a NTO-1824 hot air solder leveling machine from New Technology Overman.
Mar 23, 2017 | Outline of PNC Inc's BGA assembly capabilities.
Mar 07, 2017 | PNC Inc. recently purchased an SE500-II solder paste inspection machine from CyberOptics. In addition to other recent purchases, this machine completes another fully-equipped, top-of-the-line assembly line for the company. The SE500-II can scan 30% faster than its predecessors thanks to its unique all-in-one scan sequence. This allows it to inspect PC boards at a rate faster than 80 cm2/second. Adding to its efficiency is the streamlined and intuitive V5 series software. The multi-touch interface allows the operator to access any number of the various essential applications in seconds.
Mar 03, 2017 | Accurate Engineering Inc. recently purchased an ATG A5 flying probe continuity tester.
Jan 13, 2017 | Both of the machines have extensive capabilities including accepting boards up to 22” x 24” and supporting both electronic and mechanical tape feeders.
Dec 07, 2016 | PNC Inc. recently purchased a 1913 Mark III Series SMT Reflow Oven from Heller Industries.
Nov 01, 2016 | PNC Inc. would like to invite you to come visit us at the Inaugural New England Exposition and Technical Forum at the DCU Center on November 3 in booth 100.
Sep 12, 2016 | PNC Inc. Announced as Manufacturer of the Year Finalist for the 2016 New Jersey Manufacturing Awards
Aug 31, 2016 | Please join PNC Inc. in Marlborough, Massachusetts on September 28 and 29 for the Design-2-Part Show at the Royal Plaza Trade Center. You will get the chance to meet with key members of our team, discuss your current projects and see if we can help you reach your goals efficiently. We look forward to seeing you there!
Jul 14, 2016 | PNC Inc. recently made another investment in its pursuit to be as energy efficient as possible: the GA 75 VSD FF, 100 HP compressor. This machine is efficient in that not only is it able to manage its own workflow, but in the fact that it will pay for itself in about five years through savings in electricity ($25,000 per year).
Jul 12, 2016 | PNC Inc. is pleased to announce the addition of KT Technical Sales, as their newest sales representative for the West Coast. President of KT Tech, Mr. Ken Thompson has over two decades’ worth of experience in the industry and has a very competent staff. KT Technical Sales is an independent manufacturer representative firm serving California and the greater southwest area. They represent various companies including PC board manufacturers, makers of custom sheet metal and enclosures, wire and cable Protection solutions, LCD solutions and power supplies.
Jun 03, 2016 | PNC Inc. is proud to announce the recent purchase of an ECOSELECT 2 selective wave solder machine manufactured by Ersa. In today’s advancing technological climate, boards are more frequently being designed with a high concentration of mixed technologies. A selective wave solder machine has many advantages over a traditional wave soldering machine which made this an appropriate investment for PNC to make.
May 27, 2016 | PNC Inc. held its first ever annual Open House at their headquarters in Nutley, NJ. The event was a resounding success with 100 attendees—85 guests and 15 vendors including people from around the country and overseas as well from places like Taiwan, India and China.
May 09, 2016 | PNC Inc. in Nutley, NJ is holding its first ever open house. The event has been in the making for months now and is sure to be a unique experience for all who attend. PNC has recently made vast expansions to its headquarters facility in Nutley, NJ—with regards to both space and equipment. From upgrades in process and quality control in the PCB fabrication department to a state of the art new assembly department.
Apr 28, 2016 | PNC Inc. has announced another addition to its continually expanding assembly department: an inline electronic cleaning system called the Nanojet from Austin American Technology. Capable of both water and aqueous chemical cleaning applications, the NanoJet inline system also offers easy accessibility and simple maintenance to keep up with PNC's ever increasing needs while never sacrificing on the quality of the job being done. Employing a progressive cleaning system, the unit is capable of cleaning all flux residues and other foreign objects that may occur during the assembly process.
Mar 21, 2016 | Opportunity to meet with Customers and Vendors to discuss the future of the global PCB market Nutley, NJ: Sam Sangani, President and owner of PNC announced recently that they will be holding an open house on Friday May 20th from 9:00 AM to 6:00 PM at their newly renovated facilities in Nutley, New Jersey.
Mar 17, 2016 | Sam Sangani, President and owner of PNC has announced that his company recently added a new Universal Pick and Place machine model Genesis GI-07 to its fast growing assembly department.
Mar 15, 2016 | Sam Sangani, president and owner of PNC, has announced that his company has purchased a new PIX Fully automatic Screen Printer for their Total Concept PCB operations.
Mar 14, 2016 | Nutley, NJ – Sam Sangani, President and owner of PNC announced recently that his company will be holding an Open House on Friday May 20th from 9:00 AM to 6:00 PM at their newly renovated facilities in Nutley, New Jersey. The event will feature plant tours focusing on PNC’s Total Concept (design, fabrication and assembly in one Facility) capabilities, as well an open forum discussion with PNC key people, their vendors and their customers about the future of the Global PCB market with a special focus on technology trends.
Dec 31, 2015 | Nutley, NJ: Sam Sangani, President and owner of PNC has announced that his company recently acquired a Nordson YESTECH's BX Benchtop Automated AOI.
Dec 09, 2015 | The Jewel Box 70T from Glenbrook Technologies
Nov 16, 2015 | Catching up with PNC with Dan Beaulieu, D.B. Management Group
Mar 16, 2015 | PNC is proud to announce the latest add-on qualification of product testing to Military Performance Specification MIL-PRF-31032, CAGE Code 66766.
Feb 25, 2015 | PNC recently acquired four Pluritec Multi-Station units, two Driller/Routers and two Drillers. These machines will complement our existing drilling and routing Departments with precision drilling/routing capabilities. The multi-station machines are powered by linear motors which increase speed, accuracy and productivity. The machines are also programmable with bit hit counting and broken drill notification.
Dec 12, 2014 | PNC Inc. has obtained a new Horizontal Conveyorized CO-BRA BOND In-line Oxide Replacement line from IPS (Integrated Process Systems). The machine is capable of coating 100 panels per hour to help expedite the inner layer treatment process. Compared to the previous process of manual dip tanks, the Oxide Replacement line is far more efficient due to automation. By using fewer heaters, the new unit is more energy efficient as well.
Nov 03, 2014 | Nutley, NJ, September 24, 2014 - PNC Inc, the largest circuit board manufacturer in the tri-state area, is pleased to announce that PNC Inc. is a newly certified member of the New York and New Jersey Minority Supplier Development Council (NMSDC) as a bona fide Minority Business Enterprise as defined by the NMSDC.
Sep 18, 2014 | Nutley, NJ, September 10, 2014 - PNC Inc, a leading manufacturer of Rigid, Flex and Rigi-Flex printed circuit boards (PCBs), is pleased to announce its certification as a Minority Business Enterprise (MBE).
Oct 29, 2013 | Press release date: October 27, 2013 Coral Springs, FL – United States Media Television is proud to announce that PNC will appear on its TV program, Viewpoints (www.viewtb.com). The backbone of any of the technology without which we could not function is usually a printed circuit board. Some are rigid and can literally be thought of as the backbone of the system, whereas innovative flexible and Rigi-Flex boards are finding new applications for these devices. Nutley, New Jersey-based PNC manufactures a wide range of printed circuit boards for use in just about every field, notably high frequency RF/microwave, audio, defense, and medical sectors. With four decades of experience and a host of offshore partners, PNC can supply large quantities of printed circuit boards, including double-sided and multilayer boards. The company can even get involved in projects at the concept stage and produce schematics and prototypes.
Mar 27, 2013 | PNC Inc. is proud to announce its latest UL qualification of polyimide base materials. PNC has partnered with Ventec USA using VT-901 laminate and VT-901PP prepreg. These high-temperature, high-reliability products expand PNC’s wide product offering and introduces the manufacturer into new industries at a new competitive level. The qualification includes 0.002” inner layer cores and a minimum overall board thickness stack up of 0.025”. The qualification also includes a minimum outer layer copper thickness of half ounce copper while inner layer maximum is two ounce copper.
Mar 17, 2012 | PNC, a Nutley New Jersey manufacturer of printed circuit boards, is pleased to announce the addition of Ventec’s VT-901 250Tg Polyimide to their internal approval and UL listing. This IPC4101C/42 addition will allow PNC to expand their offerings to its customers with commercial high operating temperature, high reliability, and military specifications and those with power supply and aerospace designs. PNC’s sustained growth in the high reliability market segments drives its continual addition of proven quality substrates to its qualified products list. The addition of this new product to its many other approved high performance base materials broadens the manufactured PCB solutions from both its US based manufacturing facility and through its offshore UL approved partner.