SMT, PCB Electronic Industry News

News Releases from CAMI Research Inc.

Read CAMI Research Inc. company news

25 news releases added by CAMI Research Inc.

Company Information:

CableEye® continuity and HiPot pass/fail & diagnostic Cable & Harness Test Systems w simple scripting, labeling, documentation, cataloging & relay control. Dynamically display continuity, Ω, diodes, IR, dielectric breakdown & more

Acton, Massachusetts, USA

Consultant / Service Provider, Manufacturer

  • Phone 978-266-2655

See Company Website »

Company Postings:

(4) products in the catalog

(2) technical library articles

(25) news releases

CAMI Research Releases M2Z Low Voltage Multi-Conductor Cable Tester at EWPTE, Milwaukee

Apr 28, 2022 | A Complete Cable Management System

Generic Custom Test Interface Fixture Rated to 2100 Vdc, CB8H For Panel- and Cable-Mounted Connectors, and LIF Test Blocks

Dec 17, 2021 | CAMI Research Inc. (Acton, MA), manufacturer of the CableEye® automation-ready cable and harness test system, has rolled out a test interface board that can be customized with LIF test blocks and any number of panel- and/or cable-mounted connectors not exceeding a total of 64 pins. Rated to 2100 Vdc/1200 Vdc, the CB8H fits all CableEye testers. Connectors not included. Customization service is available.

CAMI Celebrates 25 Years Developing Automation-Ready Cable and Harness Testers

Sep 13, 2018 | CAMI Research is marking 25 years since its first sale and of innovating highly configurable test solutions for simple and complex multiconductor cables and harnesses. Trusted by industry leaders such as CERN, Ford, GE, Hitachi, NASA, Abbott, TESLA, Lockheed Martin, Raytheon, Airborn, Furukawa, TE Connectivity, and the Nobel prize-winning group, LIGO, thousands of test systems have shipped globally over the years.

The Production View for Pass/Fail checks. Displayed on any sized screen you desire, the color-coded graphic-rich display provides clarity and, at the click of a button, you may visualize the wiring schematically or by netlist. Components are automatically detected and displayed (including Diode orientation), wiring faults are color-coded, and full measurement data is provided for every pin-to-pin connection.

CAMI Develops Capability of Checking Twist Pair Relationships in Cables as Short as Six Feet

Aug 21, 2018 | Celebrating its 25th anniversary, CAMI Research Inc. (Acton, MA), manufacturer of the CableEye automation-ready cable and harness test system, has developed the capability of checking and measuring twist pair relationships in cables as short as six feet. This feature is now standard in the model M4 low voltage continuity tester, and available as an option for HiPot (HVX-series) testers. The same circuitry allows for measuring cable length, length to break, capacitance, and resistance with precision (4-wire).

When pre-populated boards are used, the tester GUI automatically displays a graphic of the connectors and wiring under test. The tester can be readily programmed to do the same for custom boards and fixtures. With a single click, the wiring schematic can be switched to a customizable netlist view which can be set to display wiring colors as shown in photo.

CAMI Research to Host Professional Development Workshops at EWPT Expo, Milwaukee

Mar 21, 2018 | CAMI Research will again host professional development workshops at the Wire Processing Technology Expo in Milwaukee, and offer opportunities to win $500 in CableEye® accessories. These sessions will be held on the Tuesday - the EXPO set-up day. At the exhibit itself, CAMI will have hands-on exhibits for visitors to experience CableEye’s ease of use and flexibility, especially regarding automated testing.

CableEye® HV-Rated QuickMount™ Housing for CAMI Connector Boards, CBH2

Jan 11, 2018 | CAMI Research has released a High-Voltage (HV)-rated QuickMount housing (CBH2) for its CableEye automation-ready, cable and wire harness testing systems. As a free-standing, quick-release board fixture, it allows users to connect CAMI's test interface boards to the 64-pin headers of any expansion module - even at some distance. The housing may be used with any CableEye model and is rated to 2100 Vdc / 1500 Vac.

CableEye® USB Type-C Test Fixture, CB26U

Aug 01, 2017 | CAMI Research Inc. (Acton, MA) has released a USB Type-C test interface board for its CableEye cable and harness testing systems. A daughter board, populated with two USB-C female connectors, it allows users to continuity-check USB Type-C terminated cables using the CableEye tester while seeing the connectors-undertest rendered graphically. The CB26U fits all CableEye models.

CAMI Research Releases CableEye® USB Type-C Test Fixture, CB26U

Jul 27, 2017 | CAMI Research has released a USB Type-C test interface board for its CableEye cable and harness testing systems. A daughter board, populated with two USB-C female connectors, it allows users to continuity-check USB Type-C terminated cables using the CableEye tester while seeing the connectors-undertest rendered graphically. The CB26U fits all CableEye models.

CAMI Research Re-Releases Continuity-Testing Video Tutorial Series

Mar 16, 2017 | CAMI Research Inc. (Acton, MA) has re-released an instructional continuity-testing video series for the field of cable and harness testing. The series covers ‘golden’ cable creation, test, and documentation stages of the manufacture of cables and harnesses. The tutorials include techniques that can also be used with backplanes and components, and guided assembly, and are demonstrated with live examples using CableEye and its latest (v5) software.

Demonstrated with live examples, the series covers ‘golden’ cable creation, test, and documentation stages of the manufacture of cables and harnesses.

CAMI Research to Host Continuity & HiPot Testing Seminar & Training Sessions at WPT Expo, Milwaukee

Feb 28, 2017 | CAMI Research will again host seminar & professional development training sessions at the Wire Processing Technology Expo in Milwaukee, and offer opportunities to win $500 in CableEye® accessories. These sessions will be held on the Tuesday – the EXPO set-up day. As an exhibitor, they will reveal a new self-driven exhibit for visitors to experience CableEye’s ease of use and flexibility, especially regarding automated testing.

CableEye® 4-Wire Calibration Verification Board, CB52

Feb 24, 2017 | CAMI Research Inc. (Acton, MA) announces another new interface board for its CableEye cable and harness testing systems. Populated with precision resistors it allows users to determine empirically whether the HVX optional, add-on, 4-Wire measurement function requires calibration.

A calibration verification tool for your 4-Wire resistance measurement module: Determine empirically whether the HVX optional, add-on, 4-Wire measurement function requires calibration

CableEye® Generic Surface Mount & TH Board, CB51

Oct 11, 2016 | CAMI Research Inc. (Acton, MA) announces another new board for its CableEye cable and harness testing systems. Populated with solder pads to accept both aligned and staggered, 1.25mm and 1.5mm pitch, surface mount and through hole (TH) connectors, the board addresses any market with a demand for board-to-board connections. Rated to 700Vdc/500Vac, the CB51 may be used on all CableEye models.

The CB51, sold without connectors, contains four sets of 60 solder pads accommodating numerous configurations of surface mount and TH connectors – aligned or staggered pins at 1.25mmm and 1.5mm pitch.

CAMI Research, a WHCC Top Product Winner, Reports Milestone Continuity Measurement

Jul 21, 2016 | CAMI Research reports that a customer has successfully tested simultaneous, multipoint continuity in a two-mile long, multicore cable (rated at 10Ω/1000ft) using a CableEye M3UH tester.

CAMI Research, a WHCC Top Product Winner, Issues New Catalog

May 04, 2016 | CAMI Research has issued its latest catalog featuring new products and services. Available immediately, the catalog showcases their expanding CableEye suite of Low and High Voltage (HiPot) test system products for cable & wire harness manufacturing.

CableEye® 2100Vdc Screw Terminal Connector Board, CB29H

Apr 06, 2016 | CAMI Research Inc. (Acton, MA) announces another new board for its CableEye cable and harness testing systems. Populated with four 16-pole screw terminal blocks, the board addresses high voltage (HiPot) testing to 2100Vdc/1200Vac. Of particular interest to the harness testing market, the CB29H is also available as a transition board variant (CB29AH).

The CB29H is also available as a stackable transition board variant (CB29AH) for mounting on harness board looms.

CableEye® Micro-Match™ Connector Board, CB49

Mar 09, 2016 | CAMI Research Inc. (Acton, MA) announces a new board for its CableEye cable and harness testing systems. Populated with solder pads to accept a suite of TE-Connectivity™ Micro-MaTch connectors, the board addresses markets plagued by vibration and fretting corrosion, and requiring “miniaturized connectivity”. Rated to 500Vdc/350Vac, the CB49 may be used on all CableEye models.

Rated to 500Vdc/350Vac, the CB49 may be used on all CableEye models

CableEye® Tester Calibration Verification Board, CB50 - Takes the Guesswork out of Scheduling Calibration

Feb 05, 2016 | CAMI Research Inc. (Acton, MA) announces a new board for its CableEye cable and harness testing systems. Populated with precision resistors, it allows users to determine empirically whether the tester requires calibration. The CB50 may be used on all CableEye models.

A simple method that allows quality-focussed companies to carry out periodic verification of tester calibration.

CAMI Research Expands Distributorship Network

Jan 11, 2016 | CAMI Research Inc. (Acton, MA) has appointed two new distributors for its CableEye cable and harness testing systems. Semicon (Poland & Eastern Europe), and LK Hitech (Korea) bring the number of global distributors to twenty.

CableEye PC-based testers with dynamic, graphic-rich user interface: HiPot tester (lhs), low voltage continuity tester (rhs)

CableEye® Quick-Change, Shielded RJ45 Adapter Board, CB18C

Jan 04, 2016 | CAMI Research Inc. (Acton, MA) announces a new connector board for its CableEye cable and harness testing systems. Populated with eight, shielded RJ45 connectors, the boards may be used to test shielded or unshielded cables. Hipot rated to 500 Vdc/ 350 Vac, the CB18C may be used on all CableEye models.

For testing shielded or unshielded connectors in high test-volume environments, allowing quick-change of the mating sockets. HiPot rated to 500Vdc/350Vac.

CableEye® Mini HDMI, Mini Display-Port Daughter Board, CB26T

Nov 30, 2015 | CAMI Research Inc. (Acton, MA) announces a new daughter board for its CableEye cable and harness testing systems. Populated with mini HDMI and mini Display-Port connectors, the boards address the computer video market. Rated to 500Vdc/350Vac, the CB26T may be used on all CableEye models.

CableEye interface for mini-HDMI and mini-displayport connectors

CableEye® upgrade program announced - upgrade original serial port testers to USB interface

Nov 02, 2015 | CAMI Research Inc. (Acton, MA) is offering a comprehensive upgrade program to owners of its original (serial port) M2 and M3 testers that will help expand test capabilities and productivity. These systems were manufactured between 1997 and 2010, and this program is typical of the company’s dedication to delivering excellent and sustained customer service. Serial port to USB upgrade orders placed before the end of the year will receive a free, warranty extension.

CableEye® Testers offer Asymmetric, Absolute, and Percentage Tolerancing for Resistance Measurements

Sep 29, 2015 | CAMI Research Inc. (Acton, MA) offers a comprehensive tolerancing option to its standard CableEye cable and harness testing system Graphical User Interface (GUI). The intuitive, graphic-rich GUI provides a clear simple operator interface and, for resistance measurements, may be user-set asymmetrically in either absolute or percentage parameters.

CableEye Dynamic GUI: Netlist showing asymmetric tolerances

CableEye® Multilingual GUI includes Japanese

Aug 05, 2015 | CAMI Research Inc.(Acton, MA) has added a Japanese language option to its standard CableEye cable and harness testing system Graphical User Interface (GUI). The intuitive, graphic-rich GUI provides a clear simple operator interface for production workers, and may now be user-set to any of seven global languages: ENG, ESP, DEU, FRA, TUR, CHN, JPN.

CableEye® Training and Verification Adapter Board, CB-T1

Aug 05, 2015 | CAMI Research announces a new, dual-purpose connector board for training new users on its CableEye cable and harness testing systems, and for performing tester system verification.

CableEye® HiPot Cable & Harness Test System, HVX-21

Aug 05, 2015 | CAMI Research announces an addition to its CableEye cable and harness testing system suite, specifically to the HV product line. The HVX-21 extends the HiPot test voltage range to 2100 Vdc and 1200 Vac permitting detection of even more subtle defects.

CableEye® Expandable HiPot Cable & Harness Test System, HVX-21: For testing continuity, resistance, DWR, IR and more.
Reflow Oven
Voidless Reflow Soldering
Now Online
7
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

The marketing tools you need -- SMTNet
Dual Lane Reflow Oven

Voidless Reflow Soldering