SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • New Tutorial Released With IPC-2223C Provides Expert Advice and Tips for Designers Working With Flexible Circuits

New Tutorial Released With IPC-2223C Provides Expert Advice and Tips for Designers Working With Flexible Circuits

Mar 28, 2012

The industry standard that establishes the specific requirements for the design of flexible and rigid –flexible printed boards, IPC-2223, Sectional Design Standard for Flexible Printed Boards, has been recently updated to its C revision. The standard now includes new design guidance and requirements for preformed bends, irregular folds and creases, staggered flexible layer bands as an alternative to “bookbinder” designs, and depanelization methods for flexible and rigid-flex array sub-pallets, as well as information on the use of adhesiveless materials. Most significant, IPC-2223C includes, as Appendix A, a new design tutorial with guidance on material selection, size and shape of flex circuits and fabrication allowances.


According to Mark Finstad, senior applications engineer with Flexible Circuit Technologies, Inc., and vice chair of the IPC D-11 Flexible Circuits Design Subcommittee that developed the standard, the new tutorial makes the standard easier to understand for designers who do not work with flexible circuits every day. “Very few users get deeply immersed in flex. It takes five to seven years working with it every day before you understand all the aspects of flexible circuit designs.”
The new version of the standard has been updated to address technology that has matured in the years since the last revision. IPC-2223C includes plenty of information on adhesiveless materials, which weren’t included in earlier documents. As adhesive quality has improved, many manufacturers have moved away from substrates with adhesives.


We tried to emphasize adhesiveless materials,” said William Ortloff, engineering fellow at Raytheon Company, and chair of the D-11 subcommittee. “Adhesiveless materials are better for soldering; they don’t have the lower temperature requirements common to adhesive based substrates, which can cause problems with glues.”


While the standard has new sections, its size was kept down by avoiding redundancy and focusing only on aspects that are distinctly tied to flexible circuitry. Technologies such as blind, buried and microvias that are the same in flex and rigid printed boards, are not included in IPC-2223C. Instead, users are referred to other standards such as IPC-2221 and IPC-2222 that address these technologies.


However, one aspect of rigid printed board technology that is included in the standard is the connection between rigid and flex printed boards. As Ortloff describes, making this connection correctly is a key point for reliability. “The document explains that you shouldn’t run the adhesive coated coverlays of the flex portion through the rigid printed board; you want to keep the flex adhesive away from vias and plated through-holes (PTH) to increase the reliability of the vias and PTH.”


Finstad adds that IPC-2223C also includes sections on strain relief fillets applied at the rigid-flex interface and other factors that are unique to printed boards that have as many mechanical factors as electrical design points. “It’s always difficult to get the best of both worlds. Flex boards aren’t much good if they can’t bend.”



For more information on or to purchase IPC-2223C, visit www.ipc.org/2223.



About IPC
IPC (www.IPC.org) is a global trade association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 3,100 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2.02 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Arlington, Va.; Stockholm, Sweden; Moscow, Russia; Bangalore, India; and Shanghai, Shenzhen and Beijing, China.

Jun 24, 2022 -

North American EMS Industry Up 9.4 Percent in May

Jun 24, 2022 -

IPC APEX EXPO 2023 Call for Participation Deadline Extended

Jun 24, 2022 -

IPC-1402, Standard for Green Cleaners Used in Electronics Manufacturing Now Open for Public Review

Jun 24, 2022 -

Industry Groups Urge U.S. Congress to Fix Weaknesses in Electronics Supply Chain

Jun 16, 2022 -

Registration Open for 4th Annual M-EXPO Wire Processing Technology Expo

Jun 16, 2022 -

Higher Costs Continue to Dominate Electronics Industry Narrative

Jun 02, 2022 -

IPC Issues Call for Participation for IPC E-Textiles 2023

Jun 02, 2022 -

North American EMS Industry up 4.3 Percent in April

Jun 02, 2022 -

North American PCB Industry Sales Up 2.1 Percent in April

Jun 02, 2022 -

AirBorn Inc. Requalifies for IPC/WHMA-A-620 Qualified Manufacturers Listing

1289 more news from Association Connecting Electronics Industries (IPC) »

Jul 06, 2022 -

Offline PCBA Cleaning Machine HJS-7100,rosin flux, non-clean flux,water-soluble flux cleaning machine

Jul 05, 2022 -

Semiconductor Spray Cleaning Machine HJS-9700,Semiconductor Wafer Cleaning Machine HJS-9700

Jul 04, 2022 -

Pneumatic Stencil Cleaner HJS-9000II,dual chamber stencil cleaning machine

Jul 03, 2022 -

Electric Stencil Cleaner HJS-9500, SMT Electric Stencil Cleaner HJS-9500

Jul 01, 2022 -

Screen Cleaning Machine HJS-4600, SMT Screen Cleaning Machine HJS-4600

Jun 30, 2022 -

Electric Fixture Cleaning Machine HJS-6700, SMT pallet cleaning machine, soldering pallet cleaning machine

Jun 29, 2022 -

Waste Water Treatment Machine RWT-1000, SMT Waste Water Treatment Machine RWT-1000

Jun 28, 2022 -

Gen3's Dr Chris Hunt, CTO submits an insightful paper to the journal of Surface Mount Technology

Jun 28, 2022 -

Squeegee Cleaning Machine HJS-3700,SMT Squeegee Cleaning Machine HJS-3700

Jun 27, 2022 -

Solderstar Celebrates 20 Years of Innovation

See electronics manufacturing industry news »

New Tutorial Released With IPC-2223C Provides Expert Advice and Tips for Designers Working With Flexible Circuits news release has been viewed 590 times

  • SMTnet
  • »
  • Industry News
  • »
  • New Tutorial Released With IPC-2223C Provides Expert Advice and Tips for Designers Working With Flexible Circuits
Jade Series Selective Soldering Machines

Manufacturing Software