SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • New Manufacturing Technologies and NPI to shorten time-to-market for Medical Devices

New Manufacturing Technologies and NPI to shorten time-to-market for Medical Devices

Dec 12, 2013

N E W S R E L E A S E

E D I T O R ’S   C O N T A C T S

Stana Marko
VP of Marketing and Sales

John Koon
Director of Corporate Communications
& Public Relations
Express Manufacturing, Inc.
3519 West Warner Avenue
Santa Ana, CA 92704
web: www.eminc.com
e-mail:   jkoon@eminc.com phone:   714.979.2228
mobile:  858.876.5177
fax: 714.556.0575


F OR   I MM E D IAT E   R EL EASE

New Manufacturing Technologies and NPI to shorten time-to-market for Medical Devices


Santa Ana, CA —   December 15, 2013.  Express Manufacturing, Inc. (EMI) announces the implementation of a plan to expand support for their current and future customers from 2014. Developed as a response to customer feedback, this plan will address customer demand for high quality products with smaller packages and a shorter time-to-market.
As the use of wearable medical devices becomes more common for patients in hospitals and home care, the need increases for product design that is focused on smaller packaging. During production, there are two ways to accomplish this. Automated Surface Mount Technology

(SMT) equipment that supports component sizes of 0.2 mm x 0.4 mm (spec. 01005) can be used to assemble printed circuit board assemblies (PCBA). An additional solution, which can be presented alone or in parallel with the 01005 package, is Package-on-Package (PoP). PoP is a sophisticated assembly-packaging technology that vertically stacks a discrete controller with Memory Ball Grid Array components. It allows multi-chip packages to be integrated for greater space savings on the printed circuit board (PCB). PoP is a process during which PCBs enable components to be mounted on both sides. The PoP method can be installed on either a two-layer or multi-layer PCB.

The Benefits of PoP for Compact Medical Designs

Through the use of the PoP method, EMI empowers developers to create compact designs which will enhance the measure of technological features available within the same limited product space. Due to recent demand by medical device manufacturers, the utilization of PoP has become more  mainstream.

The Technology behind PoP

To reduce the size of the printed circuit board assembly layout, PoP technology vertically stacks a discrete controller with Memory Ball Grid Array (BGA) components rather than occupying multiple flat surface areas. There are two approaches in the assembly: one-pass and two-pass. The one-pass approach places the controller on the PCB with proper solder paste. The solder paste is applied to the memory component and the Fuji SMT machine AIM automatically picks the memory component and places it on top of the controller. Once the placement is complete, the re-flow soldering will take place with one pass.  Although the one-pass approach can be challenging, the benefit is that it will enhance the reliability of the printed circuit board assembly (PCBA).

The more conventional, two-pass, approach will solder stack the memory to the OMAP and complete the re-flow as a component. When this process is completed, the SMT machine will place the stacked memory and OMAP on the PCBA to complete a second re-flow process. Since this two-pass approach requires the controller and memory chips to be exposed to the re-flow heat twice, EMI considers the one-pass method to be more efficient.

The Benefits of New Product Introduction (NPI) Program

Due to the recent growth in the electronic medical device industry, there is constant pressure to reduce the turnaround time for bringing new products to market. To assist customers with this need, EMI has launched a multi-level New Product Introduction (NPI) program to provide a seamless transition from development to production. EMI partners with customers at the design stage to identify components with longer lead times and perform the Design for Test and Design for Production (DFx) analyses. The objective is to provide customers with substantial cost savings by eliminating multiple re-design cycles while ensuring product manufacturability.

EMI recently celebrated its 30th anniversary in the EMS Industry. The company has come a long way since its humble beginnings with a garage assembly set-up. Currently, EMI has five locations in Santa Ana, a wholly-owned facility in China and plans for further expansion. During the past 30 years, EMI has experienced many changes in the industry. Nevertheless, the company’s main focus on customer satisfaction has enabled them to continually maintain a steady growth. C.P. Chin, President of EMI, believes one of the factors to which the company’s success can be attributed is the true partnerships that EMI shares with its customers. Mr. Chin notes, “Our success is derived from our customer’s success, which highlights the importance of having the right match between customer and EMS provider.”

When asked about the key to maintaining growth over the past 30 years, Mr. Chin focuses on four primary areas:
• Customer satisfaction
• Lowest total cost of acquisition
• Manufacturing flexibility
• Creation of successful supply chain relationships

According to the Orange County Business Journal (See the OCBJ list), Express Manufacturing, Inc. was cited as the largest contact manufacturer again this year in Southern California. Today, EMI serves customers from the USA, New Zealand, Australia, UK, Switzerland, Italy, Germany, Japan, China  and Hong Kong (China).

About Express Manufacturing, Inc.
Founded in 1982, Express Manufacturing, Inc. is an ISO 9001:2008 and ISO 13485:2003 certified provider of high-mix, medium-to-high volume printed circuit board assembly and system integration. Complete vertical integration – from specialized Engineering Services (such as printed circuit board layout, proto-typing and test development) to Supply Chain Management, Manufacturing, Fulfillment Programs and Service and Refurbishment Depot Services – allows EMI to capture efficiencies, maintain cost advantages and deliver turnkey and box-build solutions to its customer base.  Because of the depth of services EMI offers, customers are often able to reduce the number of steps from design to production, thereby minimizing cost and time to market while capturing market share and maximizing profit.  For more information on EMI, please visit http://www.eminc.com/.

Jan 03, 2014 -

Express Manufacturing Inc. (EMI) subsidiary, EMI Asia Limited, Granted EN/JISQ/ AS9100:2009

Nov 06, 2009 -

EMI and Beyonics sign MOU to set up High Volume EMS Service Effort

Aug 13, 2009 -

Express Manufacturing, Inc. Announces its ISO 13485:2003 Certification to Support the Medical Electronics Community

Aug 05, 2009 -

Express Manufacturing, Inc. Announces its ISO 13485:2003 Certification to Support the Medical Electronics Community

Apr 09, 2009 -

Express Manufacturing Inc. Announces ISO 13485 Compliance Program to Support the Medical Electronics Community

Jul 06, 2022 -

Offline PCBA Cleaning Machine HJS-7100,rosin flux, non-clean flux,water-soluble flux cleaning machine

Jul 05, 2022 -

Semiconductor Spray Cleaning Machine HJS-9700,Semiconductor Wafer Cleaning Machine HJS-9700

Jul 04, 2022 -

Pneumatic Stencil Cleaner HJS-9000II,dual chamber stencil cleaning machine

Jul 03, 2022 -

Electric Stencil Cleaner HJS-9500, SMT Electric Stencil Cleaner HJS-9500

Jul 01, 2022 -

Screen Cleaning Machine HJS-4600, SMT Screen Cleaning Machine HJS-4600

Jun 30, 2022 -

Electric Fixture Cleaning Machine HJS-6700, SMT pallet cleaning machine, soldering pallet cleaning machine

Jun 29, 2022 -

Waste Water Treatment Machine RWT-1000, SMT Waste Water Treatment Machine RWT-1000

Jun 28, 2022 -

Gen3's Dr Chris Hunt, CTO submits an insightful paper to the journal of Surface Mount Technology

Jun 28, 2022 -

Squeegee Cleaning Machine HJS-3700,SMT Squeegee Cleaning Machine HJS-3700

Jun 27, 2022 -

Solderstar Celebrates 20 Years of Innovation

See electronics manufacturing industry news »

New Manufacturing Technologies and NPI to shorten time-to-market for Medical Devices news release has been viewed 725 times

  • SMTnet
  • »
  • Industry News
  • »
  • New Manufacturing Technologies and NPI to shorten time-to-market for Medical Devices
Software for SMT

Inline Cleaning Machine Hydro-clean Array