SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • Seica Inc. participation at SMTAi Schaumburg, Illinois Booth # 315 New Frontiers of Testing -

Seica Inc. participation at SMTAi Schaumburg, Illinois Booth # 315 New Frontiers of Testing -

Sep 18, 2017

Seica Inc. will be exhibiting at the SMTAi show held in Schaumburg, IL this year showing our expanding lines of test and assembly equipment and demonstrating new frontiers of testing - the upcoming new strategy in testing and manufacturing.

The new frontiers of testing are faced daily with increasingly complex and challenging scenarios in engineering: the high component density and their presence on both sides of the boards, along with more complex circuits and lack of test points, are in contrast with the needs of the production chain, which requires effective and outstanding solutions.

Unfortunately, the increasing expectations in terms of product quality start out from the time of product development; a test ensuring the functionality of a board brought to market is as important as its fast execution, and when a technological limitation impairs this result, this is an unacceptable!

The Flying Probe Pilot 4D V8 Tester

represents the latest frontier in flying probe test technology - theoretically, a 4 probe tester can measure everything, but its overall efficiency always implies the risk of being “short” of resources and slow.

Instead, a tester featuring 8 flying probes on both sides of the board, doubles the resources available in addition too: cameras, capacitive probes, planarity sensors, led sensors, board markers, and power probes always at hand! The 8 flying probes are also available for additional tests, like power control, on-board programming, boundary-scan test, as well as functional tests and optical inspection but, above all, ensure the full functional coverage in a single test session, with comprehensive diagnostic messages and final data collection.

All this is Seica - Pilot 4D V8.

Dragonfly, the latest product line of Seica, offering AOI solutions for conformal coating and pin through hole inspection. Based on fast and accurate scanner technology, Dragonfly THT allows for indepth inspection of pin through hole device solder joints. Due to it’s innovative design it eliminates the parallax error typical of camera based systems resulting in a perfect tool to be placed after wave or selective soldering equipment. Dragonfly CC (conformal coat) has a similar architecture, but thanks to the additional UV LED light it is suitable to inspect conformal coating on electronic boards, to identify; where coating is missing or excessive, contamination, and impurities. The system is very useful for solder ball detection, thanks to the fact that the system performs a full scan of the PCB under inspection. Dragonfly systems are fully SMEMA compliant and can be available in single side or double side configurations.


Founded in 1986, Seica S.p.A. is a global supplier of automatic test equipment and selective soldering systems, with an installed base of more than 1700 systems on 4 different continents. Seica offers a complete line of test solutions, including bed of nails and flying probe testers able to perform MDA, in-circuit and full functional tests of assembled electronic boards and modules and printed circuit boards, as well as LASER-based selective soldering systems for electronic board manufacturing and a full range of test application services. Company headquarters are located in Strambino, Italy, with direct offices in USA, Germany, China, Mexico and France, supported by a vast distribution network covering the rest of the world. Since 2014, Seica S.p.A. is supported by a sister company, Seica Automation located in Milan, which designs and manufactures board handling systems and other automation equipment for the electronic manufacturing industry Please see www.seica.com

Jan 29, 2022 -

January 25-27, San Diego, CA – Booth 1100

Jan 10, 2022 -

January 25-27, San Diego, CA – Booth 1100

Dec 07, 2021 -

Semicon West USA, San Francisco – An Array of New, Innovative Products in Booth 1361

Oct 07, 2021 -

Preview Seica SMTA International show in Minneapolis, November 1-4

Aug 20, 2021 -

The Battery Show North America September 14-16 Novi, Michigan – Booth 3036

Jul 15, 2021 -

Full Probe Card Test

Jun 04, 2021 -

Seica announces new webinar

May 31, 2021 -

Big Boards Matter

Feb 18, 2021 -

Semi Test Flex Conference Expo on February 22-26, 2021

Sep 06, 2020 -

Seica, Inc. participation at SMTA International Live Virtual Exposition: September 28 - 30, 2020

76 more news from SEICA SpA »

Jul 06, 2022 -

Offline PCBA Cleaning Machine HJS-7100,rosin flux, non-clean flux,water-soluble flux cleaning machine

Jul 05, 2022 -

Semiconductor Spray Cleaning Machine HJS-9700,Semiconductor Wafer Cleaning Machine HJS-9700

Jul 04, 2022 -

Pneumatic Stencil Cleaner HJS-9000II,dual chamber stencil cleaning machine

Jul 03, 2022 -

Electric Stencil Cleaner HJS-9500, SMT Electric Stencil Cleaner HJS-9500

Jul 01, 2022 -

Screen Cleaning Machine HJS-4600, SMT Screen Cleaning Machine HJS-4600

Jun 30, 2022 -

Electric Fixture Cleaning Machine HJS-6700, SMT pallet cleaning machine, soldering pallet cleaning machine

Jun 29, 2022 -

Waste Water Treatment Machine RWT-1000, SMT Waste Water Treatment Machine RWT-1000

Jun 28, 2022 -

Gen3's Dr Chris Hunt, CTO submits an insightful paper to the journal of Surface Mount Technology

Jun 28, 2022 -

Squeegee Cleaning Machine HJS-3700,SMT Squeegee Cleaning Machine HJS-3700

Jun 27, 2022 -

Solderstar Celebrates 20 Years of Innovation

See electronics manufacturing industry news »

Seica Inc. participation at SMTAi Schaumburg, Illinois Booth # 315 New Frontiers of Testing - news release has been viewed 815 times

  • SMTnet
  • »
  • Industry News
  • »
  • Seica Inc. participation at SMTAi Schaumburg, Illinois Booth # 315 New Frontiers of Testing -
IPC Certification Training Schedule IPC Questions and answers

Jade Series Selective Soldering Machines