SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • iNEMI Publishes Guidelines for Subassemblies in High-Reliability Applications

iNEMI Publishes Guidelines for Subassemblies in High-Reliability Applications

Jun 23, 2006

HERNDON, VA (June 23, 2006) - iNEMI's High-Reliability RoHS Task Force has published guidelines regarding assembly processes and reliability requirements for RoHS5 [1] and RoHS6 [2] subassembly modules [3].

With the current RoHS exemptions for high-reliability electronics, it is possible for electronic assemblies to contain lead (Pb) and still be RoHS-compliant. Manufacturers taking the Pb exemption will continue to require SnPb-compatible components for their products, and may also use subassemblies, such as hard disk drives and power modules, that may or may not be Pb-free.

"It is very likely that manufacturers will use subassemblies that contain both tin-lead and lead-free components, which causes reliability concerns due to the differences in processing temperatures and materials," said Thilo Sack, principal engineer, corporate technology, for Celestica Inc. and co-chair of the iNEMI High-Reliability RoHS Task Force. "It is the task force's position that, if RoHS6 subassemblies are to be used in RoHS5 products, the RoHS6 subassemblies should be thoroughly qualified to ensure that they will meet the higher reliability requirements of the RoHS5 products. Furthermore, in some cases, such as BGAs that are internal to RoHS5 or RoHS6 subassemblies, solders and processes should not be mixed. For example, only BGAs with tin-lead solder balls should be used in a tin-lead assembly process, and vice versa - only SAC solder balls in a SAC process."

Some of the additional guidelines and requirements defined by the iNEMI task force include:

* Pb-free Sn finishes on leaded and discrete components should only be used when these finishes (1) include suitable tin whisker mitigation practices, as defined in the IPC/JEDEC joint publication JP002, Current Tin Whiskers Theory and Mitigation Practices Guideline, and (2) have passed Class 2 level tin whisker acceptance testing requirements, as outlined in JEDEC standard JESD-201, Environmental Acceptance Requirements for Tin Whisker Susceptibility of Tin and Tin Alloy Surface Finishes.

* For subassembly modules meeting RoHS5 or RoHS6 requirements, plated leads or pins (the module terminals) that will be attached to the printed circuit assembly should be backward compatible with SnPb assembly processes.

* For RoHS5 or RoHS6 subassemblies, the MSL rating of the module should be based on the worst case MSL rated component used in the module. MSL rating should be provided for SnPb and SAC assembly if applicable to the module. Additionally, the module should meet the temperature requirements of IPC/JEDEC J-STD-020 (revision C or later) for the appropriate SnPb and/or SAC assembly process.

* For RoHS6 subassembly modules (Pb-free module terminals, and the subassembly of the module is built with Pb-free solder and processes) PWBs internal to the module should be manufactured using materials compatible with high-temperature Pb-free soldering. PWB surface finishes also need to be compatible with the Pb-free solder alloy and higher temperature reflow soldering process used.

The complete set of guidelines can be downloaded from:

http://thor.inemi.org/webdownload/projects/ese/High-Reliability_RoHS/High_Rel_position_061206.pdf

ABOUT THE TASK FORCE

The iNEMI High-Reliability RoHS Task Force consists of electronic product manufacturers (OEMs and EMS providers) whose products are characterized by long service life and high-reliability requirements. For these companies, maintaining product reliability is absolutely critical to survival. The following companies support the iNEMI recommendations regarding RoHS5 and RoHS6 modules:

Agilent Technologies, Inc.

Alcatel

Cisco Systems, Inc.

Celestica, Inc.

Delphi Electronics & Safety

HP

Intel Corporation

Jabil Circuit, Inc.

Lucent Technologies

Plexus Corp.

Sanmina-SCI Corporation

Sun Microsystems, Inc.

For additional recommendations and guidelines from the iNEMI High-Reliability RoHS Task Force, please see the following:

Pb-Free Manufacturing Requirements for High-Complexity, Thermally Challenging Electronic Assemblies (2/16/06) http://thor.inemi.org/webdownload/projects/ese/High-

Reliability_RoHS/High_Rel_position_021606.pdf

Recommendations to Electronics Industry Component Supply Base (8/19/05) http://thor.inemi.org/webdownload/projects/ese/High-Rel_RoHS_recommends.pdf

ABOUT iNEMI

The International Electronics Manufacturing Initiative's mission is to assure leadership of the global electronics manufacturing supply chain. Based in Herndon, Va., the industry-led consortium is made up of approximately 70 manufacturers, suppliers, industry associations and consortia, government agencies and universities. iNEMI roadmaps the needs of the electronics industry, identifies gaps in the technology infrastructure, establishes implementation projects to eliminate these gaps (both business and technical), and stimulates standards activities to speed the introduction of new technologies. The consortium also works with government, universities and other funding agencies to set priorities for future industry needs and R&D initiatives. For additional information about iNEMI, visit http://www.inemi.org.

1. RoHS5 modules (5 of 6 RoHS materials) are subassembly modules or products that are RoHS-compliant, but contain Pb (under an applicable RoHS exemption). For example, these products may be soldered with SnPb, and may include soldered component finishes that include Pb.

2. RoHS6 modules (6 of 6 RoHS materials) are subassembly modules or products that are soldered with Pb-free solder and are fully RoHS-compliant (including being Pb-free).

3. Subassembly modules are electronic assemblies consisting of components (mechanical and/or electrical) that are preassembled with solder alloys, with the purpose of being attached or connected to another soldered assembly at a later time.

Jun 07, 2013 -

iNEMI Publishes White Paper Proposing a Methodology to Determine Risk of Counterfeit Use

May 23, 2013 -

iNEMI Webinar Will Share Tools Developed to Assess Risk of Counterfeit Components

May 14, 2013 -

iNEMI Publishes its Tenth Roadmap

Feb 06, 2009 -

iNEMI Survey Asks about Boundary Scan Adoption

Apr 23, 2008 -

iNEMI Roadmap Workshop

Mar 24, 2008 -

iNEMI Schedules Regional Roadmap Workshops

Nov 13, 2007 -

iNEMI Names Grace O�Malley Manager of Operations for Europe

Nov 02, 2007 -

Wiley-IEEE Press Publishes iNEMI Lead-Free Book

Jan 15, 2007 -

iNEMI Previews Highlights of 2007 Roadmap at IPC Printed Circuits Expo, APEX and Designers Summit

Nov 08, 2006 -

iNEMI Organizes Task Group to Address Availability of SnPb BGAs

10 more news from iNEMI (International Electronics Manufacturing Initiative) »

Jul 06, 2022 -

Offline PCBA Cleaning Machine HJS-7100,rosin flux, non-clean flux,water-soluble flux cleaning machine

Jul 05, 2022 -

Semiconductor Spray Cleaning Machine HJS-9700,Semiconductor Wafer Cleaning Machine HJS-9700

Jul 04, 2022 -

Pneumatic Stencil Cleaner HJS-9000II,dual chamber stencil cleaning machine

Jul 03, 2022 -

Electric Stencil Cleaner HJS-9500, SMT Electric Stencil Cleaner HJS-9500

Jul 01, 2022 -

Screen Cleaning Machine HJS-4600, SMT Screen Cleaning Machine HJS-4600

Jun 30, 2022 -

Electric Fixture Cleaning Machine HJS-6700, SMT pallet cleaning machine, soldering pallet cleaning machine

Jun 29, 2022 -

Waste Water Treatment Machine RWT-1000, SMT Waste Water Treatment Machine RWT-1000

Jun 28, 2022 -

Gen3's Dr Chris Hunt, CTO submits an insightful paper to the journal of Surface Mount Technology

Jun 28, 2022 -

Squeegee Cleaning Machine HJS-3700,SMT Squeegee Cleaning Machine HJS-3700

Jun 27, 2022 -

Solderstar Celebrates 20 Years of Innovation

See electronics manufacturing industry news »

iNEMI Publishes Guidelines for Subassemblies in High-Reliability Applications news release has been viewed 474 times

  • SMTnet
  • »
  • Industry News
  • »
  • iNEMI Publishes Guidelines for Subassemblies in High-Reliability Applications
Flux-Free Reflow Soldering

IPC Training & Certification - Blackfox