Practical Components and its sister company Practical Tools will exhibit in booth A16 at the upcoming IPC APEX Expo, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California.
New! Jabil Solder Paste Evaluation Board and Kit
Practical Components has worked with Jabil to develop a new solder paste evaluation and qualification board and kit.
The Jabil Solder Paste Evaluation Kits were designed primarily to evaluate and compare solder pastes but can be used for a wide variety of requirements such as DOEs, print and reflow experiments as well as for development of new products.
New eWLP and CSPnl 0.4 mm Pitch Amkor Wafers
A-eWLP-Wafer-0.4-CuPd-DC-NB
-5 wafers embedded copper pads (no balls)
8" daisy-chained 0.4 pitch/200 μm thickness
A-CSPnl-Wafer-.4-DC-SAC405 (PN 32101)
-5 wafers with SAC405 balls
8" daisy-chained 0.4 pitch/200 μm thickness
Amkor 0.3 mm Dummy CVBGA
The Practical Dummy Component® version of the 0.3 mm CVBGA has become a popular choice for electronics assembly. It is identical to the live package without the expensive IC die inside. The dummy versions are made of the same materials on the same manufacturing lines and have the same size, thermal and soldering properties as the live equivalent without the cost of a live die.
Highlights:
• A wafer-scale package in a miniature package
• Suitable for installation in surface mount technology (SMT)
The 0.3 mm CVBGA is a 8x8 mm, 368, 0.30 mm solder ball pitch, two-layer thin core substrate with an Ni/Au BGA finish that uses a HL832NX-A (60 µm core) and AUS 410 solder mask. This component is exclusive to Practical Components worldwide.
For this component we have added a CVBGA368-8 mm Evaluation Board that is ideal for testing, evaluating and qualifying this fine-pitch technology.
Highlights:
• Board size is 77x132 mm
• 1 mm thick
• Four layers with 15 pads
• Offered with OSP, ImAg and ENIG finish
For more information, stop by booth A16 at the show, call 714-252-0010 or visit www.practicalcomponents.com.
Since 1996, Practical Components has been the world’s leading supplier of dummy components, which are the exact mechanical equivalents of live components, used when only the physical properties of the components are required. These components can cost as much as 80% less than live components, making them ideal for testing of solder processes, machine setup and other process evaluations. Practical Components is headquartered in Los Alamitos CA and has a worldwide distribution network. For more information, visit www.practicalcomponents.com.