Jun 19, 2016 
JTAG Technologies – a specialist in board (PCBA) test solutions based on JTAG and IEEE 1149.x standards announce a new family of hardware adapters specifically designed for testing of a variety of DIMM & SODIMM sockets (sizes and styles) using a JTAG/boundary-scan controller and supporting software.
Long-standing challenge
The problem of testing DIMM memory sockets has always been troublesome for test and production engineers using JTAG/boundary-scan systems. Even when it is possible to create memory writes and reads from the boundary-scan compliant access device on the UUT (Unit Under Test), the initialization process may fail leaving clients with little diagnostics information. What’s more clients will still be uncertain whether fault lays with the DIMM module itself or the socket. Using the new JT 2127-Flex system from JTAG Technologies clients get pin-point diagnostics from a known-good test interface so they can be certain if the socket is soldered correctly (or not).
Modular System
The JT 2127-Flex system comprises two basic elements.
- A high-speed multi-channel IO module – JT 2127/DMU, and
b) a personality adapter for the chosen DIMM type – JT 2127-Flex xxx.
The combination of the DMU and Flex adapter allows test signals to be sent to and from the boundary-scan source device on the UUT performing a thorough check for open pins and short circuits. In addition the voltages on the power pins of the DIMM socket are also measured. Currently supported DIMM types are xxx = 204-3, 244-mi3, 260-4 & 288-4. Due to the modularity of this test system other DIMM formats can be supported quickly upon request.
Software
Software support for test developments is provided through JTAG Technologies ProVision developer tool-suite, which is shipped with a full set of support files for the new system. Completed DIMM socket test applications will also run on the full range of PIP runtime software modules and symphony systems where appropriate.
JTAG Technologies is a market leader and technology innovator of boundary-scan software and hardware products and services. The company was the first to bring to the [PCBA test] market such important advances as automated test generation, automated fault coverage analysis, automated flash and PLD programming via boundary-scan, and visualized boundary-scan analysis. Its customers include world leaders in electronics design and manufacturing such as Ericsson, Flextronics, Honeywell, Medtronic, Motorola, Nokia, Philips, Raytheon, Rockwell-Collins, Samsung, and Sony. Its innovative boundary-scan products provide test preparation, test execution, test result analysis and in-system programming applications. With an installed base of over 7,500 systems worldwide, JTAG Technologies serves the communications, medical electronics, avionics, defence, automotive, and consumer industries with offices throughout North America, Europe and Asia. JTAG Technologies headquarters are located in Eindhoven, The Netherlands.For more information please see www.jtag.com
