Samsung Samsung cp45 Mounter board / MK3 board / cp40 ADDA / DSP
Model: |
Samsung Samsung cp45 Mounter board / MK3 board / cp40 ADDA / DSP |
Category: |
|
Model Year: |
2020 |
Condition: |
|
Location: |
China |
Offered by: |
After receiving the input signal of home sensor of motor related to head, it is transmitted to can master BOARD.CONVEYOR Control board receive controller
The sensor input with ANC and the input of the switch on the operation panel are transmitted to the can master board. After receiving the command from the can master board, the controller makes the,
ANC and related solenoidvalve, as well as signal light, act as feeder control board to receive the command of can master board to make feeder solo ID
VALVE action ILLUMINATION CONTROL BOARD -FLYING/STAGE CAMERA regulates FLYING and STAGE illumination brightness after receiving CAN MASTER BOARD command.
Mother board f815d / V full-size SBC: computer motherboard VME CPU board mvme 162pa-252se: controller board pci-6s PCI.ISA BACK PLANE :
PCI slot module ram SDRAM 128M 168pin PC133: memory module container pack board 30-conv3-io board (2): y sub board:
Detect the limit signal and origin signal of X and Y axes can master board can feed board
: receive the command of can master board
After that, the feeder solenoidvalve can move can head board can receive board:
After receiving the sensor input of C transmission track and ANC and the input of operation panel switch, it is transmitted to can master board,
Make conveyor, ANC and related solonid valve and signal lamp act PC isa I / F card: carry out signal communication between computer and machine control part can stage ill board:
Adjust the illumination brightness of the fixed camera VME axis (1): control the X, y, mirror, width axes to drive VME axis (2): control the Z1, Z2, R1, R2, work contract and other axes to drive VME axis (3): control the X, y, mirror, width axis drive VME axis (2), control Z1, Z2, R1, R2, work contract, etc
Control Z3, Z4, R3, R4 axis (4): control Z5, Z6, R5, R6 axis drive MK3 AD / DA board: MK3 DSP board: responsible for displaying images
X axis I / F board: interface for X-axis sensor signal to communicate with y-sub-i / F board CPU: central processing unit 1, no image: vision board; camera 2, image distortion: X-axis I / F board
VISION BOARD ;
Video board 4, MMI loading error: can master board and PC isa card are not connected properly