Gen3 Systems
Gen3 Systems is a specialist manufacturer of test and measurement equipment used to help predict reliability of electronic circuits and systems in the field.
Consultant / Service Provider, Manufacturer
Gen3 Systems Limited is a specialist British manufacturer of test and measurement equipment used to predict reliability and maintain quality in the production of electronic circuits. We are a small team of experts offering not only equipment and test services but full customer training and consultancy services in the following specialist areas:
- Solderability
- SIR and CAF reliability measurement techniques
- Electronic circuit cleaning and cleanliness testing (ROSE Testing)
- Conformal coating
- Solder paste analysis
In addition, we design and manufacture conformal coating process equipment for both batch as well as in-line applications, and production process aids.
Gen3 Systems works closely with the world-renowned UK National Physical Laboratory (NPL) that helps with the development of new measurement techniques and equipment. And we are engaged in international standards development through the BSi, IEC and IPC. Our combined knowledge and experience is also employed to provide training and advice to customers, along with a range of comprehensive in-house services for solderability, SIR and cleanliness testing.
Gen3 Systems Postings
7 products »
AutoCAF™ is able to measure up to 256 individual measurement sites under conditions of high humidity and temperature in accordance with IPC-TM-650 2.6.25 Test Method & IPC 9691 CAF Test Users Guide. Conductive anodic filament (...
The new AutoSIR2™ system represents a dramatic improvement over existing SIR test alternatives, and its shielded precision electronics allows state-of-the-art accuracy resistance measurements to be made up to 1014 Ω. One...
The Solder-Saver offers companies that use wave soldering the opportunity to instantly recycle dross created in the wave solder pot, thereby saving up to 50 percent in new solder bar purchases. It can be used with leaded, lead-free or unleaded...
The Gensonic Stencil Cleaning System, awarded the European Product of the Year at Productronica 2013, is a manually operated ultrasonic transducer unit for cleaning stencil apertures. The Gensonic can be used either in conjunction with our Sten...
The MUST System 3 is the latest technological evolution of the original Multicore Universal Solderability Tester (MUST II) that grandfathered all modern solderability test standards. It remains the unquestioned industry benchmark for solderabil...
CM Series (Contaminometer™) Cleanliness Testers
For over 40 years the Benchmark for Ionic Contamination Testing Commonly referred to "Cleanliness Testing" as this test method has, for over 40 years, been acknowledged as an important Quality Assurance and Process Control to...
Nano-Coat - The Ultra Precision Dip Coating Systems
3% accuracy Being totally air operated the NEW Nano-Coat Dip Systems are totally safe to use with all coatings including flammable liquids and for the...
44 news releases »
Gen3's Dr Chris Hunt, CTO submits an insightful paper to the journal of Surface Mount Technology
Jun 28, 2022 | Gen3 a British manufacturer of testing and measuring the electronics industry announced that Dr Chris Hunt, CTO, has written a paper for SMTA on a gage study of an intercomparison evaluation to implement the use of fine-pitch test patterns for surface insulation resistance (sir) testing of solder fluxes.
GEN3 provides the solution for Printed Circuit Board Assembly for Stewart Technology Ltd
May 30, 2022 | Gen3 supplies two Nordson Cerno 300.1S Selective Soldering Systems at Stewart Technology's production facility in Tweedbank, Galashiels, Scotland.
Gen3's Dr Chris Hunt, CTO to Present at SMTA Electronics in Harsh Environments Conference
May 05, 2022 | Gen3 a British manufacturer of testing and measuring the electronics industry announced that Dr Chris Hunt, CTO, will present during the SMTA Electronics in Harsh Environments Conference.
Gen3's Dr Chris Hunt, CTO to Present at SMTA Electronics in Harsh Environments Conference
May 05, 2022 | Gen3 a British manufacturer of testing and measuring the electronics industry announced that Dr Chris Hunt, CTO, will present during the SMTA Electronics in Harsh Environments Conference.
Gen3 provides key tools for electric vehicles
Mar 23, 2022 | UK Manufacturer of test and measurement equipment for the electronics industry, GEN3 is working overtime to produce enough of its systems to meet the rapidly growing demand for both their AutoSIR2+ and AutoCAF2+ Systems.
Gen3 provides key tools for electric vehicles
Mar 23, 2022 | UK Manufacturer of test and measurement equipment for the electronics industry, GEN3 is working overtime to produce enough of its systems to meet the rapidly growing demand for both their AutoSIR2+ and AutoCAF2+ Systems.
Gen3 Systems announces product line up for Southern Manufacturing 2022
Jan 25, 2022 | Gen3 Systems Limited, a specialist British manufacturer and distributor, is pleased to announce that it will exhibit on stand L160 at Southern Manufacturing, scheduled to take place February 8th – 10th at FIVE in Farnborough, Hampshire.
Mar 09, 2021 | As electronic production test and measurement policies come into place, the demand for equipment to enable manufacturers to fulfil their obligations increases.
NEW: AutoSIR2 + and AutoCAF2+ Optimising Test Flexibility
Dec 13, 2018 | SIR and CAF testing have become significant demands by the industry in the drive to improve and enhance electronic circuit reliability.
Gen3 Systems appoints Emma Hudson as their CTO
Nov 01, 2018 | Gen3 Systems, a British manufacturer that exports globally, especially to China and SE Asia, is proud to announce the appointment of Emma Hudson as Chief Technology Officer.