Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

reflow CPU Socket Open Joint boards again

Views: 2187

we encounter some open joint on the CPU socket after rework.... - Jul 26, 2006 by via

I would be a little more worried about the pads on the board... - Jul 26, 2006 by

i would say that if you are doing localized heating than you... - Jul 26, 2006 by RDR  

spari77

#42955

reflow CPU Socket Open Joint boards again | 26 July, 2006

we encounter some open joint on the CPU socket after rework. We tried to reflow the boards again (using BGA rework machine) and found that the contact issue was resolved. Is there any risk to perform a reflow again on the CPU Socket boards without removing and replacing a new component. please note that CPU socket is not a moisture sensitive component.

This message was posted via the Electronics Forum @

reply »

Chunks

#42965

reflow CPU Socket Open Joint boards again | 26 July, 2006

I would be a little more worried about the pads on the board coming off.

reply »


RDR

#42968

reflow CPU Socket Open Joint boards again | 26 July, 2006

i would say that if you are doing localized heating than you will be okay, A socket is just a socket and cannot be degraded electrically anyway.

Russ

reply »

best reflow oven
SMT Reflow Ovens
Now Online
8
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

SMT Reflow Soldering Oven
IPC Certification Training Schedule
FPC* - Fluid Pressure Control - Dispensing Pump

Reflow Oven