Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SMTnet
»
Electronics Forum
»
Need Philips CSM84 PA1306/20 service manual

Need Philips CSM84 PA1306/20 service manual

Subscribe to Thread

Views: 12561

I need a service manual for a Philips CSM84 type PA1306/20. ... - May 08, 2007 by jmelson

Hi Jon, I had the same problem some years ago, now I have... - May 16, 2007 by andras

Andras, thanks very much for the offer of the manual! I ... - May 21, 2007 by jmelson

Hi Jon, Hit ... - May 21, 2007 by andras

Andras, Thanks so much for putting this manual up for dow... - May 23, 2007 by jmelson

Not at all Jon. I have been using my CSM66 for 2 years and ... - May 23, 2007 by andras

I did one batch of low-density (0805 and standard SO chips) ... - May 24, 2007 by jmelson

Andras, I have started to download your manual but got stop... - May 29, 2007 by sarason

Hi Andrew, Sorry, I have shared them again. Please inform... - May 29, 2007 by andras

I have finished the download and it has been most helpful in... - Jun 09, 2007 by sarason

Hi Andras, Is it possible to share this file again plea... - Nov 01, 2008 by GeorgeS

Hi George, are you still interested in? ... - Nov 18, 2008 by andras

Yes I am, thanks in advance. ... - Nov 18, 2008 by GeorgeS

Here it is: andras.4shared.com ... - Nov 18, 2008 by andras

Thank you very much Andras, you are very supportive and I ap... - Nov 18, 2008 by GeorgeS

Hello Andras, I'm brand new to the forum and have been se... - Nov 18, 2008 by tpappano

GeorgeS: I'm pleased to help you. I was in the same situatio... - Nov 18, 2008 by andras

> I need a service manual for a Philips CSM84 type >... - Nov 18, 2008 by andersenequipment

Thank you very much! It is indeed the machine with the dc s... - Nov 18, 2008 by tpappano

I recently purchased a CSM84VZ Type PA130460. The machine di... - Nov 23, 2009 by wycliffe

Hi wycliffe, What type of CSM do you have: AC or DC servos?... - Nov 25, 2009 by andras

It has DC servos. ... - Nov 25, 2009 by wycliffe

Here are the manuals: ... - Nov 25, 2009 by andras

wycliffe (and I suppose anyone with a vision system): You... - Dec 02, 2009 by tpappano

Do you still have the manual for this? I'm trying to convert... - Dec 26, 2010 by twentyninehairs

I still have the CSM84 manual operators and service manuals.... - Jan 09, 2011 by wycliffe

Need Philips CSM84 PA1306/20 service manual | 8 May, 2007

I need a service manual for a Philips CSM84 type PA1306/20. I have the PA1306/40 manual, if that is any use to anyone. The 1306/20 was the last model with analog servo amps and DC brush motors, the 1306/40 was the first with AC brushless motors and digital servo amps, so they are totally different inside.

I would be glad to pay for duplicating the right manual, if somebody has one.

Thanks,

Jon

Need Philips CSM84 PA1306/20 service manual | 16 May, 2007

Hi Jon,

I had the same problem some years ago, now I have it. I can send it you. (71.4MByte)

Best regards: andras

Need Philips CSM84 PA1306/20 service manual | 21 May, 2007

Andras,

thanks very much for the offer of the manual! I tried to email you directly. How can I get this file from you? I don't think I can take it as a single 71 MB file in an email, but I could get it as an FTP transfer.

Thanks again,

Jon

Need Philips CSM84 PA1306/20 service manual | 21 May, 2007

Hi Jon,

Hit http://andras.4shared.com/ and download it. Sorry for many little files, but I wasn't able to upload it in bigger parts.

Regards: andras

Need Philips CSM84 PA1306/20 service manual | 23 May, 2007

Andras,

Thanks so much for putting this manual up for download! It is exactly what I needed, and if I ever run into electrical problems with my machine, the schematics will save me an expensive service call. There is also a lot of calibration information that is just not in the other manuals I got, or didn't apply to this machine's software.

Thanks again, I greatly appreciate your help!

Jon

Need Philips CSM84 PA1306/20 service manual | 23 May, 2007

Not at all Jon. I have been using my CSM66 for 2 years and I think it is a very stable and abiding machine. It can place 0603 and 0.65mm pitch SSOP without any problem at 3000-3600cph. Easily and cheaply maintainable, so good choice for a "garage-workshop" as mine or for lower qty. assembling. Only feeders requiring some repair-time to work accurately (especially with 0603 capacitors).

I wish you good assembling: Andras

Need Philips CSM84 PA1306/20 service manual | 24 May, 2007

I did one batch of low-density (0805 and standard SO chips) with excellent results. I then spent some time figuring out how to calibrate the mechanical alignment station (most of the calibration offsets on this machine were either zero or several mm out of whack). Once I tuned up the offset for the MA station, it placed a .65mm pitch 144-pin TQFP very well. I eyeballed the chips before the reflow, all of them were dead on before reflow, but some drifted a bit during. I am making my own solder stencils, and am still getting the hang of tweaking the apertures for specific component types. I think I'm getting too much solder on some parts. I still have to finish making a replacement nozzle for the SO-size chips, the previous owner made his own and it gets poor vacuum, causing discarded chips. The vacuum hole is badly off-center. Other than that problem, the machine has already paid for itself (I got it for a song!) It hasn't paid for the whole project (moving, new doorway, etc.) yet, but will be well on the way with another couple batches.

Thanks,

Jon

Need Philips CSM84 PA1306/20 service manual | 29 May, 2007

Andras, I have started to download your manual but got stopped half way through, well at part12 of the file, you couldn't repost the last few files?

regards Andrew

Need Philips CSM84 PA1306/20 service manual | 29 May, 2007

Hi Andrew,

Sorry, I have shared them again. Please inform me if download finished.

Regards: andras

Need Philips CSM84 PA1306/20 service manual | 9 June, 2007

I have finished the download and it has been most helpful in trying to get this machine back into operation. You wouldn't also have the programming/users manual? Also where do you locate seals for the micro-solenoids. They are labelled in japanese and the rough translation I got was kokanee. The parts were labelled A040-4E1.

Andrew

Need Philips CSM84 PA1306/20 service manual | 1 November, 2008

Hi Andras,

Is it possible to share this file again please?

Regards, George

Need Philips CSM84 PA1306/20 service manual | 18 November, 2008

Hi George, are you still interested in?

Need Philips CSM84 PA1306/20 service manual | 18 November, 2008

Yes I am, thanks in advance.

Need Philips CSM84 PA1306/20 service manual | 18 November, 2008

Here it is: andras.4shared.com

Need Philips CSM84 PA1306/20 service manual | 18 November, 2008

Thank you very much Andras, you are very supportive and I appreciate it a lot. The file opened correctly and it contains all the information required. I hope that some day I can return you the favor.

My best regards, George

Need Philips CSM84 PA1306/20 service manual | 18 November, 2008

Hello Andras,

I'm brand new to the forum and have been setting up and running a recently acquired CSM84VZ. If I could get a look at your manual, I might be able to track down the cause of some small but annoying x-axis positioning issues. Would it be possible for me to download it as well?

Thanks, Tom in Tulsa

Need Philips CSM84 PA1306/20 service manual | 18 November, 2008

GeorgeS: I'm pleased to help you. I was in the same situation some years ago...

tpappano: no problem, download it. But it should be noted that it is for CSMs with DC servo.

andersenequipment

Need Philips CSM84 PA1306/20 service manual | 18 November, 2008

> I need a service manual for a Philips CSM84 type > PA1306/20. I have the PA1306/40 manual, if that > is any use to anyone. The 1306/20 was the last > model with analog servo amps and DC brush motors, > the 1306/40 was the first with AC brushless > motors and digital servo amps, so they are > totally different inside. > > I would be glad to > pay for duplicating the right manual, if somebody > has one. > > Thanks, > > Jon

> I need a service manual for a Philips CSM84 type > PA1306/20. I have the PA1306/40 manual, if that > is any use to anyone. The 1306/20 was the last > model with analog servo amps and DC brush motors, > the 1306/40 was the first with AC brushless > motors and digital servo amps, so they are > totally different inside. > > I would be glad to > pay for duplicating the right manual, if somebody > has one. > > Thanks, > > Jon

I may still have the manual you are looking for. I will let you know by the end of the day.

Thanks, Tom

Need Philips CSM84 PA1306/20 service manual | 18 November, 2008

Thank you very much! It is indeed the machine with the dc servos.

Thanks again, Tom

Need Philips CSM84 PA1306/20 service manual | 23 November, 2009

I recently purchased a CSM84VZ Type PA130460. The machine did not come with any reference material and its a pain learning by creating errors. Can anyone share with me any related material that is necessary to get the tool running smooth. Thanks in advance.

Need Philips CSM84 PA1306/20 service manual | 25 November, 2009

Hi wycliffe, What type of CSM do you have: AC or DC servos?

Need Philips CSM84 PA1306/20 service manual | 25 November, 2009

It has DC servos.

Need Philips CSM84 PA1306/20 service manual | 25 November, 2009

Here are the manuals:

http://www.toldacuccot.hu/dl.php?sid=ea6f1feeba21ce26cb798edddc031c0f&file=CSM.part1.rar http://www.toldacuccot.hu/dl.php?sid=b6528b8ac0bdbbd3ee96f4f1e728e77f&file=CSM.part2.rar http://www.toldacuccot.hu/dl.php?sid=79db96a970606ec255f465773e2c5383&file=CSM.part3.rar http://www.toldacuccot.hu/dl.php?sid=fc963e838d68fd10446001af006d24d6&file=CSM.part4.rar

Need Philips CSM84 PA1306/20 service manual | 2 December, 2009

wycliffe (and I suppose anyone with a vision system):

You may save yourself some considerable headache with your CSM84VZ if you check one simple thing before you get too far: Make sure the long skinny macro lens on the head camera is screwed in snugly! I thought I had a servo problem because when would run the head back and forth during teaching and then run the machine, I would observe placement errors of a fraction of a millimeter. Oddly, after mounting the first board, then manually correcting the origin, everything would be consistent from then on. The actual cause came to light with a rattle and a clunk when after doing a couple thousand boards, I found the camera lens lying on the feeder rail. Tightened it, re-calibrated the head offsets, now all is well and consistent. I wish I had found it before I had tediously removed, disassembled, and cleaned the servo motors and their encoders, which of course, didn't help 8-)

twentyninehairs

Need Philips CSM84 PA1306/20 service manual | 26 December, 2010

Do you still have the manual for this? I'm trying to convert one of these into a cnc router. It has a perfect frame for a strong table with a good plenum for vacuum ducting. I'll need to mount a Z-axis to it, probably beef up the y-axis, and re-arrange the servos. I would simply like the servo driver info to try to figure out how to run them using a serial(rs232) or parallel computer port to interface with modern control programs such as linuxCNC. Do you have anything like that?

Need Philips CSM84 PA1306/20 service manual | 9 January, 2011

I still have the CSM84 manual operators and service manuals. It is quite a big file. Let me know if you still need it.

SMTnet
»
Electronics Forum
»
Need Philips CSM84 PA1306/20 service manual

High Throughput Reflow Oven

Are you moving towards high precision applications such as 01005 dispensing? Learn how to achieve your dispensing goals without compromise.

ONLINE IPC Training & Certification

© 1995-2024 SMTnet

consignment program

Now Online

10
Visitors

0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Fixate labor costs with selective soldering solutions

Fluid Dispense Pump Integration

Jetting Pump for Integration