GSM1 error loading machine model

Subscribe to Thread

A friend of mine has a used gsm1 but when loading up UPS it ... - Mar 22, 2016 by Tom

Apparently the machine is now completing initialization but ... - Mar 22, 2016 by Tom

UPDATE: For anyone experiencing similar issues it looks like... - Mar 23, 2016 by Tom

Tom

#75470

GSM1 error loading machine model | 22 March, 2016

A friend of mine has a used gsm1 but when loading up UPS it gives an error indicating it did not receive a request to load the machine model in the allotted time. Photo is attached of the message. Any suggestions what to look at? The machine is running ups version 3.2.0.

Attachments:

reply »

Tom

#75471

GSM1 error loading machine model | 22 March, 2016

Apparently the machine is now completing initialization but when attempting to zero axis' it has a time-out waiting to change modes. Machine status page shows an error reading "initialization failure for motion control board."

reply »

Tom

#75473

GSM1 error loading machine model | 23 March, 2016

UPDATE: For anyone experiencing similar issues it looks like it is bad axis control card(s.) It would make sense since that is what the message said... A red "fail" led was overlooked on one of the cards apparently.

I had this same issue with another machine - no request to load machine model / may be an error with the machine - and a FAIL led lit on an axis card. Swapped the card, no fail led, machine initialized and zeroed.

reply »

SMTnet
»
Electronics Forum
»
GSM1 error loading machine model

ATRON® DC engineered for MAXIMUM Decoating Power! Water-based, pH neutral, cleaning agent that removes acrylic, urethane, epoxy, and some silicone conformal coating materials from pallets, fixtures, and tools.

Sell your surplus machinery!!! We buy all types of Fabrication, CNC machines, and More. Contact Tom@xtechauctions.com for more details.

Join ZESTRON Academy for an in-depth look at the cleaning agent technologies and process alternatives to pure DI-water.