YesTech YTV-1000 AOI issues

Subscribe to Thread

Hey I'm having some issues with a YesTech YTV-1000 AOI machi... - Aug 02, 2018 by Jeff

I'm going off fuzzy memories for a YTV-2000 but its probably... - Aug 02, 2018 by dwl

Could they be on the wrong axis from what they are configure... - Aug 02, 2018 by jdengler

They where bought directly from YesTech and were guaranteed ... - Aug 02, 2018 by Jeff

Jeff

#80825

YesTech YTV-1000 AOI issues | 2 August, 2018

Hey I'm having some issues with a YesTech YTV-1000 AOI machine. The machine isn't recognizing the X and the Y stepper motors. As far as we can tell nothing mechanical is wrong with the AOI. They are new motors and were suppose to have been programmed at their facility. We do not have the ability to check or to program a stepper motor. Any help would be appreciated. Jeff

reply »

dwl

#80827

YesTech YTV-1000 AOI issues | 2 August, 2018

I'm going off fuzzy memories for a YTV-2000 but its probably not too different for the 1000...

The motor drivers need to be configured for the specific axis they are driving. This should have been done by Yestech before they shipped them to you. If you bought them from a third party this probably has not been done. Best option would be to send them to Yestech and have them configured correctly.

reply »

jdengler

#80828

YesTech YTV-1000 AOI issues | 2 August, 2018

Could they be on the wrong axis from what they are configured for (X and Y swapped)? Jerry

reply »

Jeff

#80829

YesTech YTV-1000 AOI issues | 2 August, 2018

They where bought directly from YesTech and were guaranteed to be programmed from YesTech.

reply »