Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.

SOLDER MASK PER ANSI/IPC-SM-840

Views: 246

On my PCB fab drawings, I specify SOLDER MASK PER ANSI/IPC-S... - May 27, 2022 by SMTA-64387182   via SMTA

Correct. Older IPC documents refer to Class 1, Class 2, and ... - May 27, 2022 by davef  

Thanks for confirming. Joe ... - May 27, 2022 by SMTA-64387182   via SMTA


SMTA-64387182

#88013

SOLDER MASK PER ANSI/IPC-SM-840 | 27 May, 2022

On my PCB fab drawings, I specify SOLDER MASK PER ANSI/IPC-SM-840, should I specify a CLASS rating?

It appears at one time the CLASSES were 1, 2, or, 3. I believe, they are now T or H. Correct?

Thanks, Joe

This message was posted via the Electronics Forum @ SMTASMTA

reply »


davef

#88015

SOLDER MASK PER ANSI/IPC-SM-840 | 27 May, 2022

Correct. Older IPC documents refer to Class 1, Class 2, and Class 3. Class 1 => No solder mask; Class 2 => Class T; Class 3 => Class H.

reply »


SMTA-64387182

#88021

SOLDER MASK PER ANSI/IPC-SM-840 | 27 May, 2022

Thanks for confirming.

Joe

This message was posted via the Electronics Forum @ SMTASMTA

reply »

Benchtop Fluid Dispenser
IPC Training & Certification - Blackfox
Now Online
0
Visitors
0
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

Large PCB Dispensing System
Benchtop Fluid Dispenser
SMT & Related Equipment - Delta Tau Data Systems Inc.

Comprehensive Analytical Services and Support