Profile UP78 Alpha Metal ?

Subscribe to Thread

Could you send me profile of UP78 Alpha Metal, please ? Tha... - Dec 15, 2004 by Patrick Tavernier

UP78 is an old product. Data sheets are no longer posted on ... - Dec 15, 2004 by PeteC

Thank's Pete, I know is an old product but I would know i... - Dec 15, 2004 by Patrick Tavernier

Hi Patrick, For UP 78 the best profile is also the easies... - Dec 15, 2004 by Cardinal Circuit

Hi Cardinal, OK. Thank's. It's all right. What do you a... - Dec 15, 2004 by Patrick Tavernier

Ramp-to-Spike profiles can be used with most Sn/Pb alloys as... - Dec 15, 2004 by PeteC

Patrick Tavernier

#31718

Profile UP78 Alpha Metal ? | 15 December, 2004

Could you send me profile of UP78 Alpha Metal, please ? Thank's

reply »

PeteC

#31724

Profile UP78 Alpha Metal ? | 15 December, 2004

UP78 is an old product. Data sheets are no longer posted on the web site. OM-5100 is the replacement. Try calling tech support and they should e-mail you the UP78 data sheet that will show the profile curve. Jersey City, NJ Tel: 201-434-6778 http://www.alphametals.com/

reply »

Patrick Tavernier

#31726

Profile UP78 Alpha Metal ? | 15 December, 2004

Thank's Pete,

I know is an old product but I would know its reflow thermal profile because I'm not sure about it. It's a linear melting or an melting with soak zone ?

I haven't data on alphametals.com ...

reply »

Cardinal Circuit

#31727

Profile UP78 Alpha Metal ? | 15 December, 2004

Hi Patrick,

For UP 78 the best profile is also the easiest.

Straight ramp to 220-225 1-2 degrees C per second TAL 45-60 seconds drop it staight off

The Tech bulletin says the exact same thing.

Former Alpha Guy here

reply »

Patrick Tavernier