EBSO GmbH Products

SMT Products and Services offered by EBSO GmbH

SMTnet
»
SMT / PCB Products and Services
»
EBSO GmbH
»
EBSO GmbH Products

EBSO develops and manufactures cutting and bending machines for Thru Hole components and is a competent solution partner around Selective Soldering. »»

Headquarters: Hagenbach, Germany

Manufacturer Manufacturer

7 listed by EBSO GmbH

Product	Category
EBSO SPA 300/400 NC Automatic Selective Soldering Systems The SPA range of systems starts from manual machines all the way up to fully automatic solder centres. The Ebso SPA 300/400 NC is an automatic selective soldering system with manual loading. Solder bath and solder pump is covered with nitrogen. Designed for automatic soldering of conn...	Selective Soldering
SPA - R Selective Solder Rework System The bench top machine SPA-R is a manual solder station to rework leaded components such as connectors etc. Due to RoHS conform electronics the lead free solder temperature raised which made the rework of THT components with a solder iron even more difficult then it was before. The sol...	Rework & Repair Equipment
EasyCut 450 PCB Depanelizer Manual Circular/Linear Blade Depanelizer For PCB´s up to 450 mm length Manual Circular/Linear Blade Depanelizer Both large and small PCB’s can be separated in an economically viable manner by LINEAR BLADE PCB DEPANELIZERS. The PCB is laid onto the linear blade with the edg...	Depaneling
EasyCut 300 / 300M PCB Depanelizer Manual or Motorized PCB Depanelizer For Boards up to 300 mm length The EasyCut300M has two operating speeds where the lower blade is powered and pulls the PCB panel between the two blades for singulating the panels. The PCB is fed up to the blades by hand and then indepe...	Depaneling
EasyCut 100 PCB Nibbler PCB N 100 Nibbler – Stegtrenner The N 100 PCB Nibbler for routed Printed Circuit Cards is ideal for low to medium volume production or as back up for your expensive capital equipment. The NIBBLER SINGULATION TOOL separates routed PCBs carefully...	Depaneling
Ebsomat 30-1 Component Counter Electronic counter for taped axial, radial and SMD taped components. Since May 2008 with new feature of a multiplier to count taped SMD component with sizes of 0402 or even 0201. Furthermore has the EBSO counter new machine diagnostic features and is easier to operate.	Component Counters / SMD Counters
Component Pre-Forming and Preparation For more then 25 years is Ebso the core competence centre for forming, cutting and kinking of traditional through hole components. With more then 20 standard units and machines on offer by Ebso, is it possible for us to offer total solutions for any need of conventional component pre-forming as well...	Through-Hole

Product

EBSO SPA 300/400 NC Automatic Selective Soldering Systems

The SPA range of systems starts from manual machines all the way up to fully automatic solder centres. The Ebso SPA 300/400 NC is an automatic selective soldering system with manual loading. Solder bath and solder pump is covered with nitrogen. Designed for automatic soldering of conn...

Selective Soldering

SPA - R Selective Solder Rework System

The bench top machine SPA-R is a manual solder station to rework leaded components such as connectors etc. Due to RoHS conform electronics the lead free solder temperature raised which made the rework of THT components with a solder iron even more difficult then it was before. The sol...

Rework & Repair Equipment

EasyCut 450 PCB Depanelizer

Manual Circular/Linear Blade Depanelizer For PCB´s up to 450 mm length Manual Circular/Linear Blade Depanelizer Both large and small PCB’s can be separated in an economically viable manner by LINEAR BLADE PCB DEPANELIZERS. The PCB is laid onto the linear blade with the edg...

Depaneling

EasyCut 300 / 300M PCB Depanelizer

Manual or Motorized PCB Depanelizer For Boards up to 300 mm length The EasyCut300M has two operating speeds where the lower blade is powered and pulls the PCB panel between the two blades for singulating the panels. The PCB is fed up to the blades by hand and then indepe...

Depaneling

EasyCut 100 PCB Nibbler

PCB N 100 Nibbler – Stegtrenner The N 100 PCB Nibbler for routed Printed Circuit Cards is ideal for low to medium volume production or as back up for your expensive capital equipment. The NIBBLER SINGULATION TOOL separates routed PCBs carefully...

Depaneling

Ebsomat 30-1 Component Counter

Electronic counter for taped axial, radial and SMD taped components. Since May 2008 with new feature of a multiplier to count taped SMD component with sizes of 0402 or even 0201. Furthermore has the EBSO counter new machine diagnostic features and is easier to operate.

Component Counters / SMD Counters

Component Pre-Forming and Preparation

For more then 25 years is Ebso the core competence centre for forming, cutting and kinking of traditional through hole components. With more then 20 standard units and machines on offer by Ebso, is it possible for us to offer total solutions for any need of conventional component pre-forming as well...

Through-Hole