CYBERSOLV C8508 Full-Strenght Maintenance Cleaner

CYBERSOLV C8508 Full-Strenght Maintenance Cleaner Description:

CYBERSOLV© C8508 is the latest generation spray cleaner for reflow ovens and general equipment maintenance cleaning. C8508 has been tested on the toughest baked on flux residues with great success and has proven effective on the latest lead free flux.

Cybersolv C8508 is a non-flammable solvent maintenance cleaning fluid designed to remove flux residues from reflow oven surfaces, wave soldering fingers and pallets. Metal spring loaded fingers are used to hold and track printed circuit boards over a solder bath during the wave soldering process. Prior to soldering, liquid fluxes are applied to the bottom side of the circuit board using foaming and spray application methods. Overspray from the liquid fluxes adheres to wave fingers and pallets. Over time, the over spray flux must be cleaned.

Cybersolv C8508 solvency make-up is engineered with a mixture of oxygenated solvents and water. The solvents are specifically selected based on their affinity for rosin, no-clean and water soluble wave solder flux residues. Wave soldering machines are equipped with a fluid chamber and brushes to removed flux residues following the soldering process. C8508 is used full strength. The composition dissolves the flux residues and dries evenly without the need for a rinse.

Cybersolv C8508 is also effective at cleaning wave soldering pallets. The product is designed to be full strength in immersion systems using spray-under-immersion or ultrasonic agitation. The product is effective at ambient temperatures. If the residues are burnt or charred, heating the solution to 50-60øC improves cleaning performance. Following the cleaning step, the pallets should be rinsed with DI water and dried.

• MAINTENANCE

Typical Process

• Process: Manual, Spray or Immersion
• Concentration: 100%
• Temperature: Room Temperature
• Rinse: Clean Wet Cloth
• Dry: Air

Product Properties

• pH (10g/L): 10.7
• Flash Point: None to Boiling
• Boiling Point: 221°F / 105°C
• Water Soluble: Complete
• VOC, @ 100% 299 g/L

CYBERSOLV products are specially formulated for superior performance in benchtop, stencil and maintenance cleaning. Whether for rework, oven cleaning or stencil cleaning CYBERSOLV will outperform anything in its class.

Other KYZEN's Cleaning Products:

• AQUANOX line of chemistries are concentrated aqueous cleaning chemistries designed for the Electronic Assembly, Aerospace and Automotive industries.  Each product in the line has been specially formulated for a variety of cleaning processes and purposes such as cleaning circuit boards and printed circuit board cleaning.
• IONOX products are semi-aqueous and solvent cleaning chemistries designed to remove tough soils from electronic assembly and advanced packaging products.
• KYZEN E products offer a variety of cleaning solutions for stencils, pallets, and various maintenance applications to remove burned-on fluxes and solders commonly used in electronics assembly manufacturing.
• MICRONOX products are semiconductor grade cleaning chemistries for defluxing and particulate removal for the Advanced Packaging, Microelectronics and Semiconductor industries.
• CP line of corrosion protection products offer long term protection for a variety of metals. KYZEN CP products are used to inhibit metal parts while enhancing the removal of a wide range of organic and inorganic soils and provide up to 90 days of inhibition and under some conditions beyond.
• Solstice Performance Fluid (PF, PF-2A, and PF-HP) are fluorinated solvents that provide exceptional cleaning power and satisfy long-term environmental and safety requirements. Solstice PF solvents have been specially formulated for a variety of cleaning needs and purposes for use in multiple applications such as electronics, metal finishing, and oxygen systems cleaning. Solstice PF has been identified as a replacement for a high-environmental-impact solvent currently used in NASA test facilities. Solstice PF is the recommended chemistry replacement for AK225.
• The KYZEN Line of Process Enhancement products are ancillary products developed to enhance and support the superior performance of all KYZEN Cleaning Chemistries used in Electronic Assembly, Metal Finishing, Aerospace, and Automotive industries.