MICRONOX MX2708 Organic Acid Residue Cleaning Agent

MICRONOX MX2708 Organic Acid Residue Cleaning Agent Description:

MICRONOX MX2708 is formulated for the demanding cleaning challenges presented within leadless devices such as low standoff gaps and fine pitch BGAs, flip chips, QFNs, LGAs, and passives. MX2708 completely removes organic acid residue of all kinds at low, safe operating concentrations all while having no effect on exposed metal and intermetallic alloys including Cu, Al, Sn, Pb, Ni, Ag, and Au finishes. MX2708 most effectively cleans organic acid flux residues at lower concentrations in spray-in-air cleaning systems.

MICRONOX MX2708 is a balanced cleaning agent designed around the critical process conditions that match the cleaning agent with water-soluble fluxes and pastes. Because of the very low surface tension, MX2708 offers superior cleaning under highly dense die and rinses freely and completely without reacting with exposed metals or damaging substrates.

Application:

• Flip Chip Cleaning

Typical Process

• Process: Spray-in-Air
• Concentration: 3-7%
• Temperature: 140-149°F / 60-65°C
• Rinse: DI Water
• Dry: Hot Air

Product Properties

• pH (10g/L): 9.8
• Flash Point: >210°F / 99°C
• Boiling Point: 266°F / 130°C
• Water Soluble: Complete
• VOC, @ 10% 90.1 g/L

MICRONOX products are semiconductor grade cleaning chemistries for defluxing and particulate removal for the Advanced Packaging, Microelectronics and Semiconductor industries.

Other KYZEN's Cleaning Products:

• AQUANOX line of chemistries are concentrated aqueous cleaning chemistries designed for the Electronic Assembly, Aerospace and Automotive industries.  Each product in the line has been specially formulated for a variety of cleaning processes and purposes such as cleaning circuit boards and printed circuit board cleaning.
• IONOX products are semi-aqueous and solvent cleaning chemistries designed to remove tough soils from electronic assembly and advanced packaging products.
• CYBERSOLV products are specially formulated for superior performance in benchtop, stencil and maintenance cleaning. Whether for rework, oven cleaning or stencil cleaning CYBERSOLV will outperform anything in its class.
• KYZEN E products offer a variety of cleaning solutions for stencils, pallets, and various maintenance applications to remove burned-on fluxes and solders commonly used in electronics assembly manufacturing.
• CP line of corrosion protection products offer long term protection for a variety of metals. KYZEN CP products are used to inhibit metal parts while enhancing the removal of a wide range of organic and inorganic soils and provide up to 90 days of inhibition and under some conditions beyond.
• Solstice Performance Fluid (PF, PF-2A, and PF-HP) are fluorinated solvents that provide exceptional cleaning power and satisfy long-term environmental and safety requirements. Solstice PF solvents have been specially formulated for a variety of cleaning needs and purposes for use in multiple applications such as electronics, metal finishing, and oxygen systems cleaning. Solstice PF has been identified as a replacement for a high-environmental-impact solvent currently used in NASA test facilities. Solstice PF is the recommended chemistry replacement for AK225.
• The KYZEN Line of Process Enhancement products are ancillary products developed to enhance and support the superior performance of all KYZEN Cleaning Chemistries used in Electronic Assembly, Metal Finishing, Aerospace, and Automotive industries.