Solder Dross Separator SDS-10MS
Company Information:
Name: |
Solder Dross Separator SDS-10MS |
Category: |
|
Offered by: |
|
Solder Dross Separator SDS-10MS Description:
Quick Overview
Solder dross separator SDS-10MS has Patent mixing and separation system which make separation more efficient and easier for operation, it is a best solution for small batch solder dross separation.
SDS-10MS Solder Dross Separator Features
|
● Equipped with earth leakage protection for safety. |
|
● Separated tin ash goes into collecting box, convenient for taking out. |
|
● Machine is equipped with 2 sets of molding tray , convenient for exchange. |
|
● Patent mixing and separation system improve separation efficiency. |
|
● OMRON temperature controller and SSR relay ensure accurate temperature control and long service life. |
|
● Compact size ,all stainless steel for machine casing makes machine look beautiful and maintenance easy. |
|
● Solder pot is made of corrosion resisting SUS 316 material with long service life. |
|
● Uses “U” shape heater covered cast iron heating plate, which can avoid deformation. |
|
● Machine will alarm when Separated pure tin goes into a cabin and reaches to certain volume to indicate discharging tin. |
|
SDS-10MS - Specifications |
|
|
Mixing motor |
1φ 220V 90W |
|
Feeding port capacity |
<10KG Dross |
|
Mixing Capacity of Bottom Tin |
70KG |
|
Temperature range |
RT+10-350℃ |
|
Heating-up time |
60MIN |
|
Separating speed |
Continuous15kg/60min |
|
Dimension |
L700mm*W1000*H1050mm |
|
Totol Power Consumption |
4.3KW |
|
Normal running power |
1.2KW |
|
Power |
1φ220V 60Hz |
|
Net Weight |
Appro*110kg |
Normally the wave solder dross yield generated changes according the temperature of solder pot; the quantity of soldered PCB; the width of PCB; the in-time solder adding and the wave nozzle’s design.
Every day one wave solder machine will generate about 3 kg of dross in 8 hours of machine running. .
1 wave solder 8 hours running 3 kg dross = 3 kg x $US30 = $US90
80% CAN BE SAVED/recycled $US90 x 80% = $US72
The separating capacity of SDS-10MS is 10kg/hour ,it can accomodate for more than 10 wave solder machine.
So less than 100 days (USD7200), customer can get the investment back. Meanwhile, machine do not need any other chemical, it’s separating in physical way, solder can put back to pot immediately.
Solder Dross Separator SDS-10MS was added in Jun 2016
Solder Dross Separator SDS-10MS has been viewed 1457 times
20 More Products from 1 CLICK SMT TECHNOLOGY CO., Limited :
.jpg)
