6-Zone SMT Reflow Oven

6-Zone SMT Reflow Oven Description:

6-Zone SMT Reflow OvenTN360C

Product Description

Protection system   TN360C uses SSR solid relay (450V) that has large power and pressure prevention to non-contact output, safe and reliable. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.

Main features for TN360C
1> Intuitional welding control, TN360C adopts advanced furnace temperature collection system. It can test temperature curve and temperature in furnace hearth. The temperature curve can be recorded or printed at the same time.
2> Smooth and safe transmission system, Drive system adopts a high quality conversion motor and conversion system .It also has a closed-loop governor and Turbine speed reducing box of 1,100 to keep running smoothly .Speed,01600mm/min.
3> Stable and safe electric control system, Delay switch protection. After power off, temperature drops evenly so that can prevent damage to transmission component and heater.

4> Upper and lower heating zones are separately controlled. The circulation speed can also adjust separately. It is suitable for welding different PCB plates and components.

Model

TN360C

Heating part parameter

Heating zone

6 heating zones(6 upper,6 cover)+1 cooling zone

Heating method

Full forced Hot air heating

Heating area length

1800mm

Cooling zone

1 zone,  (1up/1 below)

Cooling method

transverse flow vortex centrifuge blower

Built-in automatic relay heating system

To prevent over-pressure damage controller or motor when start up and to prevent component damage when welding.

 Transmission parameter

PCB Board width:≤ 300mm

PCB conveyor Height：900±20mm

conveyor direction：L→R

Conveyor Material：Stainless steel

Chain-driven Mesh belt conveyor：Net belt and chain-driven transmission

Mesh belt width：300mm

Conveyor speed：0-1600mm/min adjustable

Control part parameter

Power supply：380V (3 ph, 4 wires) 50/60Hz

Max Power;34kw

Normal working power：19KW

Warm-up time：≤ 30min

Control system：PLC+ Torch module temp control system+ IPC

Range of temperature control：Room Temperature-360 °C

Temperature control：Advanced Intelligent micro computer PID temperature control automatically in each zone + SSR non-contact output

Precision of temperature control：± 2°C

Temperature distributing error：± 2°C

 Machine Body Parameter

 Net Weight：680 kg

Dimension( L×W×H )(mm)：(2900×900×1300mm)

Beijing Torch Co.,Ltd.
Skype:torchsmt08
Tel:8610-60509015ext862
Mobile:8613241060184
E-mail:s8@tonzh.com.cn
Trade massenger:cn1510945738
Web:www.torchsmt.com