SMT AOI Machine ZW 800

Company Information:

Flason is high-tech enterprise focusing on SMT research and development,building new advanced solutions in SMT Assembly machines, like reflow oven, wave soldering machine, pick and place machine, AOI,SPI,PCB conveyor etc.

shenzhen, China

Manufacturer

86-13691605420

See Supplier Website »

Company Postings:

(1) used SMT equipment marketplace item

(1609) products in the catalog

(144) news releases

Name:	SMT AOI Machine ZW 800
Category:	Inspection
Offered by:	Flason Electronic Co.,limited

SMT AOI Machine ZW 800 Description:

http://www.flason-smt.com/product/SMT-AOI-Machine.html

SMT AOI Machine ZW 800

Inspection Component: 0201 chip
PCB size::25x25-480*330mm
Dimension:980*1080*1410 mm
Weight: 600kg
Product description: SMT AOI Machine ZW 800
INQUIRY

SMT AOI Machine ZW 800

AOI Specification:

Vector analysis algorithm, a combination of multiple detection algorithms to achieve the best detection capabilities.
The full version matches multiple pieces of detection at any position.
Support offline programming and debugging.
Multi-program, multi-board testing and automatic switching of test programs on both sides, making testing more efficient and faster.
Smart camera barcode recognition system (identifying 1D code and 2D code).
Multi-line monitoring system, all production line production status is clear at a glance.
The remote programming and debugging control functions are used together, and the software control performance is stronger.
A powerful SPC statistical analysis system.
Multifunctional new design, new algorithm, new interface
The new 800 series products intelligently meet the industrial 4.0 solution
Powerful SPC statistical analysis system
Professional SPC analysis report, the macro-commissioning of the entire production process, promote the improvement of the production line, reduce the incidence of defects, and improve production efficiency.
Test result report.
Bad statistics and pictures.
Complete line process improvement program
The whole line process improvement solution can achieve fine analysis of defects, for example, for the defects found after reflow soldering, the picture of the front of the component and the solder paste can be retrieved, and then the real cause of the defect can be analyzed, so that effective Process improvement program.
The software can not only control the defects caused by the system, but also effectively prevent the defects caused by accidental reasons, so that the process level can be raised to a new level, and the single-digit Dppm can be realized.
Feature:

1.HD image, easy for 0201 chip.

2.Full color image statistics analysis

3.Optical character recognition(OCR)

4.IC bridge analysis

5.Color analysis

6.Graphics similarity

7.Black white ratio analysis

8.Intensity analysis

9.Non linear color analysis

10.CAD data input and output

11.MPF technology, fast programming

12.Camera barcode identification(1D&2D)

13.Spare component library

14.Auto double side test

15.Auto skip test

16.SPC

17.Off line inspection system

18.NG Rate 99%, Repeat accuracy 3 pcs, False Negative 10PPM, False Positive 5000PPM

Offline programming
Off-line programming software enables complete off-line programming of all components, even for large-size ICs, can be implemented offline, without the need for host trial tuning; and can be used to debug multiple programs in real time without downtime. Update.
One person multi-machine, intelligent communication.
In the central server mode, the test information of the machine can be collected through the central control server, which facilitates the comprehensive management of production. Only one operator is required for multiple devices.
ZW-800 technical performance description

category	project		Specifications
Optical system	Camera		5 million Gigabit network color high speed camera
	Resolution		10/15/20 micron/dot (optional) comes standard with 15 micron/point (corresponding to FOV: 36mm*30mm)
	Optical lens		5.0M pixel telecentric lens, depth of field: 8mm - 10mm
	Light source system		RGB ring multi-angle LED structure light source
	Light source control system		Digital constant current controller
Software identification system	Image processing speed	FOV processing speed	<170 milliseconds
		Movement speed	Up to 700 milliseconds
		Detection speed	3500 square millimeters / second
		Characteristics	IPE is an abbreviation of Image Processing Expression, which allows users to customize the image source with simple expressions. Different algorithms can combine different effects, which can greatly improve the detection rate and reduce the false positive rate. The image source in the Qubit AOI system can understand the dot matrix of pixels. Each pixel is represented by data from 1 to 4 channels. The IPE expression can independently calculate each pixel in the image source to generate a new image.Can detect multiple pieces anywhere in the class
		operating	Graphical offline programming and debugging, accurate automatic positioning of micron, fast process, support for remote offline debugging, does not affect the normal test of equipment
	Mark	Points	2 common Mark points can be selected to automatically correct the horizontal Mark
	Test content	Printing solder paste	Skew, Wuxi, Shaoxi, Duoxi, Open circuit, pollution, bridging
		Patch	Missing parts, offset, skew, tombstone, side stand, flip, polarity reverse, wrong piece, breakage, pollution, bridging, multiple pieces of IC bending foot
		After reflow soldering	Missing parts, offset, skew, tombstone, side stand, flip, polarity reverse, wrong piece, broken, pollution, Wuxi, Shaoxi, multi-tin,fake welding, solder ball IC bending position any position
		After wave soldering	Insert needle, Wuxi, Shaoxi, Duoxi, fake solder, tin bead, tin hole, short circuit, multiple pieces in any position
		Red rubber board	Missing parts, offset, skew, tombstone, side stand, flip, polarity reverse, wrong piece, broken, Yijiao, multiple pieces in any position
computer system	PCB size	50 × 50 mm ~ 4 00 × 330 mm (can be customized according to customer requirements)
	PCE thickness	0.3 mm to 6 mm
	PCB warpage	≤6 mm (with fixture-assisted correction) to eliminate the effects of PCB deformation (special requirements can be customized)
	Part height	The net height is ≤30 mm and the net height is ≤ 20 mm (special requirements can be customized)
	Minimum part	01005 components, 0.3 mm pitch and above IC
	X, Y platform	Drive device		AC servo motor system
		Precise positioning		≤8 microns
Control System	operating system	Windows8-64Bit
	Computer host	I5 CPU, 8G, GPU graphics, 16G RAM, 128G solid state drive, 1TB mechanical hard drive
	monitor	22-inch LCD widescreen display
Other parameters	Mechanical dimensions	90 cm × 95 cm × 1 60 cm (height with feet)
	weight	About 650 kg
	power supply	AC 220 volts ± 10%, frequency 50/60HZ, rated power 1200W

Keywords:

China reflow oven, pick and place machine factory,China chip mounter, SMT chip mounterManufacturer, Lead Free Reflow Oven factory, wave soldering machine manufacturer,pick and place machine supplier.

Flason Electronic Co.,ltd provide a full smt assembly line solutions, including Lead freereflow oven, wave soldering machine, SMT pick and place machine, smt stencil printer,PCB conveyor manufacturer, PCB unloader, chip mounter, SMT AOI machine, SMT SPI machine,SMT X-Ray machine, SMT assembly line equipment, PCB production Equipment smt spare partsetc any kind SMT machines you may need, please contact us for more information: wechat whatsapp:008613691605420, Skype: flasonsmt, Email: sales@flason-smt.com

FAQ

1) This is the first time I use this kind of machine, is it easy to operate?

There is English manual or guide video that show you how to use machine.

If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.

2) If machine have any problem after I receive it, how can I do ?

Free parts send to you in machine warranty period.

If the part is less than 0.5KG, we pay the postage.

If it exceeds 0.5KG, you need to pay the postage.

3) MOQ ?

1 set machine, mixed order is also welcomed.

4) How can I buy this machine from you? ( Very easy and flexible !)

A. Consult us about this product on line or by e-mail.

B. Negotiate and confirm the final price , shipping , payment methods and other terms.

C. Send you the proforma invoice and confirm your order.

D. Make the payment according to the method put on proforma invoice.

E. We prepare for your order in terms of the proforma invoice after confirming your full payment.

And 100% quality check before shipping.

F.Send your order by air or by sea.

5)Why choose us ?

A. Gold supplier on Alibaba !

B. Trade assurance to US$54,000 !

C. Best price & Best shipping & Best service !

Contact information

PREVIOUS：SMT Offline AOI Inspection Machine ZW 500NEXT：SMT Online AOI Machine ZW 810

LATEST NEWS

How to Maintain a Reflow Oven?
How to optimize the reflow profile?
How the modern solder reflow oven works?
How to Prevent Solder Bridging in 3528 PLCC6 RGB LEDs?
How to Prevent Solder Ball and Bridging Defects during the S

Contact: Andrey

Phone: 13691605420

Tel: 0755-85225569

Email: sales@flason-smt.com

Add: Flason Industry park Shajing Town Baoan district shenzhen China 518104

When SMT matter to your business, partner with Flason. Where innovation takes form.
reflow oven lead free reflow oven LED strip reflow oven dual rail reflow oven custom reflow oven China reflow ovenSMT Peripheral Equipment SMT reflow oven
wave soldering machine pick and place machine lead free wave soldering machine custom wave soldering machinecustom pick and place machine SMT Assembly line
SMT Reflow Oven Manufacturer Wave Soldering Mahchine Manufacturer Pick and Place Machine Manufacturer Reflow Oven Manufacturer SMT Spare Parts LED Pick and Place Machine
Andrey: sales@flason-smt.com Wechat whatsapp:+86 13691605420

Keywords: Reflow Oven SMT Reflow Oven Wave Soldering Machine SMT Stencil Printer Pick and Place Machine SMT Inspection machine SMT Pick and Place machine SMT Peripheral Equipment SMT Spare Parts PCB Loader Unloader SMT AOI Machine Chip Mounter Solder Paste Printer PCB Conveyor SMT Feeder Storage Cart Selective soldering machine SMT Nozzle Siemens Feeder SMT Feeder SMT Feeder Juki Feeder Selective Wave soldering machine LED strip Reflow Oven Semi Auto Solder Paste Printer Automatic SMT Stencil Printer Juki RS-1 Pick and Place Machine SMT wave soldering machine Manufacturer China SMT reflow oven manufacturer Small wave soldeirng machine

For More information,visit US: Reflow Oven Manufacturer or SMT Reflow Oven Wave Soldering Machine SMT Stencil Printer Pick and Place Machine SMT Inspection machine SMT Assembly Line SMT Peripheral Equipment SMT Spare Parts SMT Feeder SMT Nozzle Hanwha HM520 Chip Mounter Feeder storage cart wave soldering machine manufacturer email us: sales@flason-smt.com

SMT AOI Machine ZW 800 was added in Nov 2018

SMT AOI Machine ZW 800 has been viewed 225 times

20 More Products from Flason Electronic Co.,limited :