Panasonic SMT High Speed Chip Mounter Npm-Dx Placement Machine
Company Information:
Name: |
Panasonic SMT High Speed Chip Mounter Npm-Dx Placement Machine |
Category: |
|
Offered by: |
|
Panasonic SMT High Speed Chip Mounter Npm-Dx Placement Machine Description:
SFG Electronic Technology Co.,Limited
Contact:Andy Tung
Cell Phone/WhatsApp/Wechat:+86 13751093139
Skype:kelvin-andy
| Model ID | NPM-DX | |
|
PCB dimensions (mm) *When the long spec. conveyor is selected |
Single-lane mode | L 50 × W 50 ~ L 510 × W 590 |
| Dual-lane mode | L 50 × W 50 ~ L 510 × W 300 | |
| PCB exchange time
*When the short spec. conveyor is selected |
2.1 s ( L 275 mm or less) 4.8 s ( L 275 mm or over to L 460 mm or less) *May differ depending on PCB specifications. |
|
| Electric source | 3-phase AC 200, 220, 380, 400, 420, 480 V 5.0 kVA | |
| Pneumatic source *1 | Min.0.5 MPa,200 L /min (A.N.R.) | |
| Dimensions (mm) | W 1 665 *2 × D 2 570 *3 × H 1 444 *4 | |
| Mass | 3 600 kg (Only for main body:This differs depending on the option configuration.) | |
| Placement head | Lightweight 16-nozzle head V2 (Per head) |
Lightweight 8-nozzle head (Per head) |
4-nozzle head (Per head) |
|
| Max. speed | 46 200 cph (0.078 s/ chip) |
24 000 cph (0.150 s/ chip) |
8 500 cph (0.424 s/ chip) 8 000 cph (0.450 s/ QFP) |
|
| Placement accuracy (Cpk>=1) | ±25 μm/Square chip | ±25 μm/ Square chip ±40 μm/QFP 12 mm Under ±25 μm/QFP 12 mm to 32 mm |
±20 μm/ QFP | |
| Component dimensions (mm) | 0201 component *5*6 / 03015 component *5 0402 component *5 to L 6 x W 6 x T 3 |
0402 component *5 ~L 45 x W 45 or L 100 x W 40 x T 12 | 0603 chip ~ L 120 x W 90 or L 150 x W 25 x T 30 | |
| Component supply |
Taping | Tape:4 / 8 / 12 / 16 / 24 / 32 / 44 / 56 mm | Tape:4 ~56 /72 / 88 / 104 mm | |
| Taping | 4, 8 mm tape:Max. 136 | |||
| Stick | Max. 32 (Single stick feeder) | |||
*1 : Only for main body
*2: 2 265 mm in width if extension conveyors (300 mm) are placed on both sides.
*3: Dimension D including feeder cart
*4: Excluding the monitor, signal tower and ceiling fan cover.
*5: 0201/03015/0402 component requires a specific nozzle/tape feeder.
*6: 0201 component placement is optional. (Under conditions specified by Panasonic)
* Placement tact time and accuracy values may differ slightly depending on conditions.
* Please refer to the specification booklet for details.
Panasonic SMT High Speed Chip Mounter Npm-Dx Placement Machine was added in Jun 2020
Panasonic SMT High Speed Chip Mounter Npm-Dx Placement Machine has been viewed 123 times
17 More Products from SFG Electromechanical Equipment Co.,Limited :
