GLICHN lead free wave solder machine

Model:	GLICHN lead free wave solder machine
Category:	Soldering - Wave
Model Year:	2012
Condition:	new
Location:	China
Offered by:	Beijing Glichn S&T Development Co.,Ltd
	Contact Supplier

Lead free wave solder machine LF350

Feature:

 lead free solder, Environmental protection design;

 automatic synchronous input board conveyor device, board input is stable

and smooth;

 Titanium alloy chain and finger

 Aluminum alloy guide, high strength and hardness;

 constant pressure flux spray system, it can make spray pressure stable;

 Automatic flux tracking system: Continuous, back and front spray; spray area

and time are adjusted automatically with PCB width and speed;

 With double rosin exhaust filter plate (which can be clean), it can reduce

pollution;

 preheat system: strong hot air system, the hot air from air motor arrives PCB

bottom; it can be pulled out directly which is convenient to clean;

 it is with heat compensation function after preheating; the temperature cool

down ≤2℃ before putting PCBs;

 spray wave crest: helix spray design, it can solder SMD component shadow;

 perfect wave crest: advance wave crest 1 technology, few tin oxidation, wave

crest 2 will make solder pad perfect;

 double wave crests are stepless frequency motors, they control the height of

wave crest independently;

 automatic clean finger device: import micro pump, propyl alcohol is cleaning

liquid, automatic cycle to clean machine fingers;

 strong air cool device: cool air is < 10℃; the temperature on PCBs fall down,

cool air will fall down 8℃/sec, no cool air fall down 3℃/sec;

 Saving energy running: tin wave crest can be up and down with PCBs

automatically, it can reduce tin oxide up to 30%;

 temperature alarm function (over high or low), automatic tracking PCBs and

counter system;

 top and bottom controlling, it is very stable;

 short circuit protection and Over current protection system;

 Closed loop controlling is in transmission system. Step less adjustable speed

can ensure accuracy time during PCB preheating and soldering.

Model LF350

Control Panel and PLC

transmission motor 1P AC220V 90W

transmission speed 300-2000mm/min

Board width 50-350mm（w）

Preheat zone Power consumption：9KW

Length：1500mm

Temperature：（room temperature-250℃）

Preheat IR/Hot air

Tin pot heat 10KW （room temperature-300℃）

Pot capacity 280KG

The height of wave crest 0-12mm

Wave crest motor 3P AC220V 0.18KW×2pcs

Cleaning finder pump 1P AC220V 6W

Cool common air cool/ force air cool

PCB direction L→R(R→L)

Flux capacity 6Litres

Flux air pressure 3-5BAR

Solder angle 4-6°

Power supply 3P AC380V 50HZ

Total power/running power 15KW/5KW

Machine size 3200（L）×1350（W）×1650mm（H）

Total size 3950（L）×1350（W）×1650mm（H）

Net weight 1200KG