SMT, PCB Electronics Industry News
  • SMTnet
  • »
  • Industry News
  • »
  • AIM Solder’s Karl Seelig to Present during S12 Technical Session at IPC APEX 2013

AIM Solder’s Karl Seelig to Present during S12 Technical Session at IPC APEX 2013

Jan 18, 2013

 AIM Solder announces that its VP of Technology Karl Seelig will present his paper titled “Conformal Coating Over No-Clean Flux” at the upcoming IPC APEX Expo, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in San Diego, CA. This presentation will be held during session S12 titled “Fluxes and Pastes” on Wednesday, February 20, 2013 from 9-10 a.m.

The session will cover how reliable solder joint formation depends on the design/paste/printing/reflow process. Weakness in any of these areas means defects and decreased reliability. This session will highlight the choices an assembler has in pastes. Both the flux/vehicle and metal components of solder pastes will be covered. Build on your knowledge base to make the best choices in the quest for reliable solder joints.

In his paper, Mr. Seelig will explain how as the proliferation of modern life electronics continues to drive miniaturization and functionality, electronic designers/assemblers face the issue of environmental exposure and uncommon applications never previously contemplated.  This reality, coupled with the goal of reducing the environmental and health implications of the
production and disposal of these devices, has forced manufacturers to reconsider the materials used in production.

Furthermore, the need to increase package density and reduce costs, has led to the rapid
deployment of leadless packages such as QFN, POP, LGA, and Micro-BGA. In many cases, the
manufacturers of these devices will recommend the use of no clean fluxes, due to concerns
over the ability to consistently remove flux residues from under and around these devices.

These concerns, along with the need to implement a tin whisker mitigation strategy and/or
increase environmental tolerance; have led to the conundrum of applying conformal coating
over no clean residues.

The AIM Research & Development Department has united with OEM electronics and conformal
coating manufacturers in an attempt to characterize the different coating technologies
currently available. In this study, various coating materials were tested with different
chemistries of no clean fluxes. Results demonstrate possible combinations meeting the mission
profile of the assembly with consideration for the assemblers’ capabilities and cost objectives.

For a more comprehensive look at this topic, stop by technical session S12.


AIM Headquartered in Montreal, Canada, with locations worldwide, AIM is a leading global manufacturer of assembly materials for the electronics industry. The company produces solder paste, liquid flux, cored wire, bar solder, adhesives, preforms, and specialty alloys such as indium and gold for electronics assembly, PC fabrication, component manufacturing, and other industries.  For more information on how we can assist you visit www.aimsolder.com.

 

Jan 29, 2014 -

AIM Solder Expands Technical Support in Mexico

Jan 10, 2014 -

AIM Solder Announces Appointment of Can Li as Sales Manager of Northern China

Nov 08, 2013 -

AIM’s International Technical Support Manager, Carlos Tafoya, to present at the IPC Conference on Solder and Reliability in Costa Mesa, CA, November 13, 2013

Jul 10, 2013 -

AIM Pleased to be Presented the 2013 Green Supplier Award from Philips Lighting

May 13, 2013 -

AIM Solder Announces the Release of NC277 VOC-free Liquid Flux

May 07, 2013 -

AIM Solder’s NC259 Solder Paste Offers Superior Performance

Apr 30, 2013 -

AIM Solder Announces Appointment of Sales Representative, PHASE 4, Inc.

Apr 25, 2013 -

AIM Solder Announces Appointment of Sales Representative, Rich Sales Co.

Apr 19, 2013 -

AIM Solder Receives Environmental ISO 14001:2004 Certification

Apr 08, 2013 -

AIM Solder Brings Low-Cost, Lead-Free Solder Paste to NEPCON China 2013

36 more news from AIM Solder »

Jul 06, 2022 -

Offline PCBA Cleaning Machine HJS-7100,rosin flux, non-clean flux,water-soluble flux cleaning machine

Jul 05, 2022 -

Semiconductor Spray Cleaning Machine HJS-9700,Semiconductor Wafer Cleaning Machine HJS-9700

Jul 04, 2022 -

Pneumatic Stencil Cleaner HJS-9000II,dual chamber stencil cleaning machine

Jul 03, 2022 -

Electric Stencil Cleaner HJS-9500, SMT Electric Stencil Cleaner HJS-9500

Jul 01, 2022 -

Screen Cleaning Machine HJS-4600, SMT Screen Cleaning Machine HJS-4600

Jun 30, 2022 -

Electric Fixture Cleaning Machine HJS-6700, SMT pallet cleaning machine, soldering pallet cleaning machine

Jun 29, 2022 -

Waste Water Treatment Machine RWT-1000, SMT Waste Water Treatment Machine RWT-1000

Jun 28, 2022 -

Gen3's Dr Chris Hunt, CTO submits an insightful paper to the journal of Surface Mount Technology

Jun 28, 2022 -

Squeegee Cleaning Machine HJS-3700,SMT Squeegee Cleaning Machine HJS-3700

Jun 27, 2022 -

Solderstar Celebrates 20 Years of Innovation

See electronics manufacturing industry news »

AIM Solder’s Karl Seelig to Present during S12 Technical Session at IPC APEX 2013 news release has been viewed 650 times

  • SMTnet
  • »
  • Industry News
  • »
  • AIM Solder’s Karl Seelig to Present during S12 Technical Session at IPC APEX 2013
Dual Lane Reflow Oven

IPC Certification Training Schedule IPC Questions and answers