Company Information:
Jun 18, 2018 | The SMT equipment communication rule standardization subcommittee (hereafter referred to as ELS) from the Japan Robot Association (hereafter referred to as JARA), of which Fuji Corporation is a member, has advanced the standardization of communication for M2M cooperation in SMT lines.
The standard JARAS 1014 has been introduced for the SMT market.
Mar 12, 2018 | Fuji Machine Manufacturing Corporation (headquarters: Chiryu, Aichi; president & CEO: Mr. Nobuyuki Soga; hereinafter referred to as "Fuji") has been working on an initiative titled the “factory in a box” concept as a member of a Nokia-led group of 12 electronics industry players.
Nov 14, 2017 | At the Japan Robot Association, enterprises who manufacture surface mount technology (SMT) equipment and related software launched the SMT equipment communication protocol standardization subcommittee in order to establish protocols for sharing information by communication methods between SMT machines (M2M cooperation). A ballot was held, and the elected subcommittee chairman for the first year is from Fuji Machine Manufacturing Co., Ltd. and the vice subcommittee chairman is from Panasonic Corporation, with the board of governors comprising representatives from member corporations including Yamaha Motor Co., Ltd., JUKI CORPORATION, along with OMRON Corporation, Saki Corporation, TAMURA CORPORATION, and CKD Corporation. The twenty member companies shown in table 1 will work together to advance this standardization.
Mar 16, 2016 | SAKI is a leading company in the field of inspection solutions towards SMT(surface mount technology) lines. With SAKI’s innovative mind from its establishment, SAKI has built up a wide range of portfolio from solder paste inspection(SPI), 2D and 3D automated optical inspection(AOI), to 3D automated X-ray inspection(AXI) systems, aiming to realize high productivity solution for all customers.
Mar 16, 2016 | Chiryu / Aichi, Fuji (March 16, 2016) – Fuji Machine mfg.co.,ltd announced today the addition of Koh Young (Koh Young Technology Inc.) to the Fuji Smart Factory members.
Mar 16, 2016 | In regard to the placement processes used for electronic circuit boards, there are ever growing calls for high-mix, as well as variable-mix and variable-volume production in order to keep up with changes in the marketplace. In order to meet these demands, Fuji developed the flexible and expandable AIMEX IIIc, which was announced in October 2015. On this occasion we would like to announce the release of the AIMEX III, a machine built with the same concepts as the AIMEX IIIc, as well as the ability to produce large panels.
Oct 26, 2015 | Fuji Machine Manufacturing Corporation (headquarters: Chiryu, Aichi; president & CEO: Mr. Nobuyuki Soga; hereafter called as "Fuji") has developed and added a new product, an electrical component placement machine (mounter) "AIMEX IIIc", in the product line. This machine is going to be displayed at the Fuji Mount Technology Show 2015 that will be held at Fuji headquarters on November 26th and 27th.
Jun 02, 2015 | SPEEDLINE TECHNOLOGIES, INC and FUJI MACHINE MFG. CO., LTD have decided to strengthen sales collaboration in Japan.
Both parties have agreed on developing a strategic approach to the market in Japan, which will allow us to offer the world’s best solutions in the PCB (Printed Circuit Board) production industry.
Apr 27, 2015 | Fuji Machine Manufacturing Co., Ltd. has shipped its 50,000th NXT module. This goal was reached just two years after the 40,000 module milestone and represents a great achievement for all those involved in the development, manufacture, sales and support of the NXT.
Mar 11, 2015 | There are three solutions for improving the productivity even more with the latest NXT III related software.
Dec 17, 2014 | Fuji's Scalable Placement Platform NXT III now supports 0201 mm (0.25 x 0.125 mm, 008004") components as standard. By loading the newly developed H24G head on the NXT III, 0201 mm (0.25 x 0.125 mm, 008004") components can be supported without any change to the specifications of the machine (speed: 35,000 cph, accuracy: ±25 μm). The Intelligent Part Sensor (IPS), which checks the orientation of parts on the nozzle and ensures that the part does not remain on the nozzle after placement, is standard on the H24G placement head.
Dec 09, 2013 | Fuji exhibited its newest units at Productronica 2013 that was held from November 12th to the 15th in Germany.
Thanks goes to all who came to Fuji's booth. The number of customers that visited the booth this year greatly exceeded that of the previous show.
Dec 09, 2013 | Fuji exhibited its newest units at Productronica 2013 that was held from November 12th to the 15th in Germany.
Thanks goes to all who came to Fuji's booth. The number of customers that visited the booth this year greatly exceeded that of the previous show.
Nov 17, 2013 | Fuji has updated its offline power supply unit released in March to support AIMEX-2 and AIMEX-2S machines.
The offline power supply unit reduces the load on operators and adds further automation to SMT production lines.
Oct 31, 2013 | Of the various electronic components used on printed circuits boards, the majority can be mounted using standard SMT processes. However, there are still many products that require large, odd-form or insertion components which cannot be handled by standard mounting equipment. These components are often mounted by hand at a later stage of production. This type of manual mounting is highly labor intensive, so there is strong demand to automate these processes. Low yield rates and maintaining consistent quality for this manual work are also important issues that must be addressed. Fuji's SmartFAB automates manual assembly work to save labor and achieve high productivity along with high quality.
Oct 01, 2013 | Fuji Machine Manufacturing Co., Ltd. is proud to announce the release of the DynaHead (HX) and HexaFeeder for our electronic component mounting machines (placing machines). DynaHeads are supported on AIMEX II and AIMEX IIS machines. HexaFeeders are supported on NXT II, NXT III machines as well as AIMEX-series machines.
Sep 23, 2013 | Fuji has released Floor Insight, new software for monitoring quality and operating rates at all the lines in an entire factory which also offers powerful analysis tools and gives help in creating effective countermeasures.
Sep 03, 2013 | Fuji has started accepting orders for the Fuji Scalable Placement Platform, NXT III.
Sep 03, 2013 | Fuji is proud to announce that the release of a new automation and labor saving tool - the Auto Splicing Unit.
May 13, 2013 | Fuji Machine Mfg. Co., Ltd. is excited to announce the upcoming release of its newly developed NXT III mounting platform. The latest edition to the NXT series offers improved performance in all areas and continues the evolution of a machine which has now sold more than 40,000 modules all over the world, covering every imaginable production type and volume.
Apr 22, 2013 | The all-in-one placement machine AIMEX II has been developed. The AIMEX II inherits concepts from the popular AIMEX, but with increased flexibility and expandability.
Mar 28, 2013 | Fuji has just released its newest automation unit, the Auto Head Cleaner. This unit allows you to automatically clean heads offline and can be used to clean any of the rotary placing heads from the NXT and AIMEX series machines.
Jan 22, 2013 | Fuji has released the NXTP M35 printer, which expands the supported panel size of this printer series to 350 x 300 mm (13.7 x 11.8 inches). The latest addition to the Fuji line-up has all the benefits of the previously released NXTP M25, but with a wider body for handling medium sized panels.
Mar 22, 2012 | Fuji’s new NXT IIc machine is an addition to the already popular NXT series line up and is enabling customers around the world to achieve some of the best area productivity rates in the industry.
The NXT IIc is a modular scalable placing platform just like the NXT II, but manages to squeeze the same advanced mounting technology into an even more compact body. The result is an astounding performance of 59,000 cph per square meter.
Jan 10, 2012 | Fuji Machine Manufacturing will be exhibiting at the first big event on the SMT calendar for 2012 - the 41st Internepcon Show in Japan. Running from January 18th to 20th at the Big Sight venue in Tokyo, this year’s event is sure to attract lots of people all desperate to see the latest electronics manufacturing technology.
Dec 27, 2011 | Fuji Machine Manufacturing Co., Ltd. with supplier Toyo Communication Technology Co., Limited will establish a joint venture called KUNSHAN FUJI MACHINE MFG. CO., LTD. (provisional) in Kunshan, Jiangsu, China. This joint venture will manufacture, in China, highly reliable, high quality, cost competitive machine parts and assemblies to be used in machines such as electronics assembly machines and machine tools. In addition, there is the prospect that electronics assembly machines and machine tools will be produced locally in the future. With both companies combining their strengths such as the advanced technology from Fuji and the supply chain from Toyo in this cooperative venture, we can provide more competitive products. This joint venture will be established in April 2012 (scheduled) and our target is to begin operations during 2013.
Dec 15, 2011 | Fuji has just released its newest and most advanced printer ever. The NXTP-M25 extends the modular concept of the world-famous NXT series of mounters to the print stage of production. This high-performance, compact screen printer supports dual lane production, making it ideal for production of panels for small electronic devices such as smart phones, tablet PCs and digital cameras.