SMT, PCB Electronics Assembly Manufacturing News
Stay informed with latest electronics manufacturing news added by SMTnet members.
- SMTnet
- »
- SMT, PCB Electronics Manufacturing & Assembly Industry News
19855 SMT / PCB Assembly Industry News Releases
CableEye® 4-Wire Calibration Verification Board, CB52
Feb 24, 2017 | CAMI Research Inc. (Acton, MA) announces another new interface board for its CableEye cable and harness testing systems. Populated with precision resistors it allows users to determine empirically whether the HVX optional, add-on, 4-Wire measurement function requires calibration.
.jpg)
CableEye® continuity and HiPot pass/fail & diagnostic Cable & Harness Test Systems w simple scripting, labeling, documentation, cataloging & relay control. Dynamically display continuity, Ω, diodes, IR, dielectric breakdown & more
Acton, Massachusetts, USA
YAMAHA Wins Coveted NPI New Product Award at APEX 2017 for Revolutionary Z:TA-R / YSM40R Modular Surface Mounter
Feb 24, 2017 | Yamaha Motor Corporation, USA won a coveted New Product Introduction (NPI) Award for the company’s new ultra‐high‐speed Z:TA-R / YSM40R modular surface mounter, which boasts the world’s fastest placement rates and area productivity at 200,000 CPH. The award, sponsored by UP Media/Circuits Assembly magazine, was presented on Tuesday, February 17, 2017 at the IPC/APEX 2017 Conference and Exhibition at the San Diego Convention Center and was accepted by George Babka, Sales General Manager. NPI Awards recognize the leading new products for electronics assembly introduced during the previous 12 months. Awards are selected by an independent panel of practicing industry engineers.
Yamaha Motor IM America offers Single and Dual Lane production Printers, Mounters and AOI.
Kennesaw, Georgia, USA
STI Electronics Goes to SMTA Houston Expo to Discuss Training Services/Training Materials/Engineering Services
Feb 23, 2017 | STI Electronics will exhibit at the SMTA Houston Expo & Tech Forum, scheduled to take place Thursday, March 9, 2017 at the Stafford Centre in Houston, TX. Company representatives will discuss STI’s Training Resources and Engineering Services divisions.
Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry.
Madison, Alabama, USA
Consultant / Service Provider, Manufacturer, Standards Setting / Certification, Training Provider
Ersa to Attend the SMTA Houston/Dallas Expo & Tech Forums
Feb 23, 2017 | Kurtz Ersa North America today announced plans exhibit at the SMTA Houston & Dallas Expo and Tech Forums. The Dallas Expo is scheduled to take place Tuesday, March 7, 2017 at the Plano Centre and the Houston Expo will be held Thursday, March 9, 2017 at the Stafford Centre. Ersa’s team will highlight the HR 550 hybrid rework system and Smartflow 2020.
Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.
Wertheim, Germany
Networked 3D inspection from Viscom at DELTEC
Feb 23, 2017 | For solder paste inspection (SPI), automatic optical inspection (AOI) and automatic and manual X-ray inspection (AXI/MXI) technologies, DELTEC Automotive GmbH & Co. KG in Furth im Wald, Bavaria, Germany, relies on 3D systems from Viscom AG. Their user-friendly advantages are clearly evident.
A leading provider of industrial image processing (AOI and AXI) Automated Optical and X-ray inspection equipment.
Hanover, Germany
Seika Recognizes Top Performing McDry Reps during APEX
Feb 23, 2017 | Seika Machinery is pleased to announce its top McDry representatives for 2016. The top three reps were recognized during the recent IPC APEX EXPO in San Diego.
Seika Machinery provides electronics manufacturers with advanced machinery, superior materials and engineering services including Automated Test Equipment, SMTA assembly equipment and QA products
Torrance, California, USA
Torenko and Associates Celebrates 40 Years in Business
Feb 23, 2017 | Torenko and Associates is pleased to announce its 40th year as a leading manufacturers’ representative organization. Since 1977, Ron Torenko and his team have specialized in the sales and marketing of premier electronic assembly equipment, production tools, test, repair, inspection and consumable products.
A leading manufacturer’s representative organization specializing in the sales and marketing of premiere electronic assembly equipment, production tools, test, inspection, and consumable products.
Sunnyvale, Texas, USA
Vi TECHNOLOGY Will Discuss Innovative Process Improvement Software for Smart Factories at ENOVA STRASBOURG
Feb 23, 2017 | Vi TECHNOLOGY will exhibit in Booth D22 at ENOVA STRASBOURG, scheduled to take place March 15-16, 2017 at the Parc des Exposition in France. Vi TECHNOLOGY will discuss how the company has coupled its 5K3D AOI with the PI Series 3D SPI and SIGMA Link to create a complete inspection solution for smart factories.
Vi TECHNOLOGY is a worldwide global supplier of a wide range of innovative Automated Inspection AOI, 3D-SPI equipment and software solutions that provide real time data collection and correlation across the SMT line.
Richardson, Texas, USA
Viscom Awards Horizon Sales for Outstanding Sales Performance
Feb 23, 2017 | Viscom today announced that it awarded Horizon Sales ‘2016 Representative of the Year’. Carsten Salewski, President and CEO of Viscom Inc., and Ed Moll, Viscom Inc.’s VP of Sales – Americas’, presented the award to Dave Trail, President of Horizon Sales, during the recent IPC APEX EXPO in San Diego. Horizon Sales was selected for the award in recognition of the company’s sales performance in 2016.
A leading provider of industrial image processing (AOI and AXI) Automated Optical and X-ray inspection equipment.
Hanover, Germany
IPC Honors Uyemura International Corp. and Honeywell with Corporate Recognition Awards
Feb 23, 2017 | IPC – Association Connecting Electronics Industries® bestowed its highest corporate honors upon two member companies, Uyemura International Corp. and Honeywell. During a luncheon at IPC APEX EXPO® the IPC Peter Sarmanian Corporate Recognition Award was presented to Uyemura and the IPC Stan Plzak Corporate Recognition Award was presented to Honeywell.
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
Water Soluble, Tin-Lead Solder Paste from Henkel Enables High-Yield Results for Demanding Applications
Feb 23, 2017 | Henkel’s market leadership in solder materials development continues with the commercial launch of LOCTITE HF 2W, a tin-lead, water-washable solder paste designed for high-throughput, high-yield production. Halide- and halogen-free and REACH compliant, LOCTITE HF 2W addresses environmental responsibility while delivering outstanding performance for Pb-based soldering.
Henkel is a manufacturer of materials for PCB and component assembly. The materials include Loctite adhesives, Multicore soldering products, Hysol encaps and underfills, and Power Devices thermal phase change pads.
Irvine, California, USA
Essemtec Wins the 2017 NPI Award for Multifunction Placement for the New FOX2
Feb 21, 2017 | Essemtec announces that it has been awarded a 2017 NPI Award in the category of Component Placement – Multifunction for its FOX2. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO. This marks the 15th industry award that the Swiss manufacturer has received in recognition of its production systems for electronic assembly and packaging.
The new FOX2 by Essemtec combines jetting of solder paste or glue and placement in a single machine. The new version is based on the original award-winning platform, which is the first machine in its class with linear motors and a mineral cast frame, providing excellent speed, stability, accuracy, and making it perfectly suited for use in small to medium production environments.
Essemtec is a worldwide leader in manufacturing of highly flexible Surface Mount Technology (SMT) production equipment - pick-and-place system, dispenser, printer, oven, storage system and software Solutions.
aesch/LU, ZH, Switzerland
Vitronics Soltec Receives Award for Catalytic Thermal Oxidizer Technology in Reflow Soldering System
Feb 21, 2017 | ITW EAE’s Vitronics Soltec was honored with a New Product Introduction award during the IPC APEX Expo at the San Diego Convention Center. The award, presented by Circuits Assembly and Printed Circuit Design and Fab, was in recognition of the CATHOX™ Catalytic Thermal Oxidizer used in the Centurion Reflow Soldering System. An independent panel of practicing industry engineers selected the recipients for this 10th annual award for electronics assembly equipment, materials, software, and PCB fabrication.
Global manufacturer of XPM Reflow Ovens, ZEVA Selective Soldering and Delta Wave Soldering Equipment.
Camdenton, Missouri, USA
Kester to Host Technical Rework Seminar
Feb 21, 2017 | Kester is hosting a Technical Rework Seminar, scheduled to take place Tuesday, March 7 at Kester’s Global Headquarters in Itasca, IL.
Kester is a leading global supplier of assembly materials to the electronic assembly, component and microelectronic marketplaces.
Itasca, Illinois, USA
Libra Industries Upgrades the Speed on Its ACE K.I.S.S. Selective Solder System
Feb 20, 2017 | Libra Industries is pleased to announce that it has upgraded the software on its ACE K.I.S.S. 102 selective solder machine. With the new software and drive system, Libra Industries’ ACE K.I.S.S. 102 runs up to 30 percent faster and the programming time has been reduced by at least 50 percent. Additionally, the new software has a better user interface along with dual screens to watch the product run and detect issues early on.
A leading provider of integrated Electronic Manufacturing Services serving OEM manufacturers dealing with complex or technically sophisticated manufacturing requirements in diverse industries and applications.
Mentor, Ohio, USA
SMART Group Releases “Conformal Coating & Cleaning Defect Guide”
Feb 20, 2017 | MART Group, Europe’s largest technical trade association focusing on Surface Mount And Related Technologies, announces the release of its latest colour guide: “Conformal Coating & Cleaning Defect Guide 2.”
The SMART Group Aims to Promote the Advancement of the Electronics Manufacturing Industry through the Education, Training of its Members in Surface Mount and Related Assembly Technologies.
Bucks , United Kingdom
Gala dinner event in Castello of Pavone, Turin, Italy marks 30 years in business for the ATE manufacturer
Feb 20, 2017 | To mark the 30th anniversary of the founding of Seica S.p.A, President, Mr. Antonio Grassino and General Manager, Ms. Barbara Duvall, hosted a gala dinner on January 19th at the hotel “Castello di Pavone”. The event was held in conjunction with the Kick off Sales meeting, a biannual event for Seica’s global sales network.
SEICA offers innovative ATE solutions which range from Bare Board Test, Flying Probe Systems, In-Circuit and Combi Test to Functional Test.
Strambino, Italy
Ersa Wins TWO NPI Awards for Its New Rework and Selective Soldering Systems
Feb 20, 2017 | Kurtz Ersa North America announces that it has been awarded two 2017 NPI Awards. The company was awarded in the category of Repair and Rework for its HR 550 High Performance rework system, and Soldering – Selective for the VERSAFLEX-Ultra selective solder module. The awards were presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.
Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.
Wertheim, Germany
KYZEN Earns 10th Service Award for Superior Customer Service
Feb 20, 2017 | KYZEN announced today that it has been honored with the 2017 Circuits Assembly Service Excellence Award (SEA) in the category of Cleaning/Processing for its outstanding customer ratings, as judged by its own customers. This marks KYZEN’s tenth Service Excellence Award, and is a direct result of KYZEN’s philosophy of putting its customers first – no matter what.
A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.
Nashville, Tennessee, USA
ZESTRON Americas Introduces Jose Luis Hernandez, New Application Engineer
Feb 20, 2017 | ZESTRON is pleased to announce the addition of Mr. Jose Luis Hernandez as a new application engineer for North Mexico.
The globally leading provider of high precision cleaning products, services and training solutions in the electronics and semiconductor manufacturing industries.
Manassas,
Consultant / Service Provider, Manufacturer, Training Provider
Cogiscan Presents Horizon Sales with Business Development Achievement Award during APEX
Feb 20, 2017 | Cogiscan is pleased to announce that it has awarded Horizon Sales with its Business Development Achievement Award. François Monette, Cogiscan’s VP of Sales and Marketing, presented the award to Dave Trail, President of Horizon Sales, during the recent IPC APEX EXPO in San Diego.
Cogiscan provides factory-wide electronics manufacturing traceability (TTC), MSD control, component set up verification, PCB assembly error-proofing, components inventory management.
Bromont, Quebec, Canada
Libra Industries’ Continuous Improvements Total More than $600k in Capex in Fiscal Year 2016
Feb 20, 2017 | Libra Industries today announced that it spent more than $636,000 on continuous improvements in 2016. The investments are part of the company’s ongoing quality efforts and included new equipment purchases, IT server upgrades and more.
A leading provider of integrated Electronic Manufacturing Services serving OEM manufacturers dealing with complex or technically sophisticated manufacturing requirements in diverse industries and applications.
Mentor, Ohio, USA
SMT and Conventional Photo CD ROM
Feb 20, 2017 | Images to include in training and presentations which are royaly free. Photos from one of the larges collection in the industry http://www.bobwillis.co.uk/product-category/photo-cd-rom/
On site and online Training and consultancy in electronics manufacture. Wide range of training products which are solder worldwide by IPC, SMTA, SMART Group and others
Chelmsford, Essex, United Kingdom
Consultant / Service Provider, Events Organizer, Media / Publisher / Online Resource, Training Provider
Hello! It's About ViTrox's Tech Day!
Feb 17, 2017 | ViTrox Technologies, the solutions provider of innovative, advanced and cost-effective automated vision inspection systems and equipment for the semiconductor and electronics packaging industries, today announced that it's going to host a User Group Meeting (UGM) and Open Day with Strategic Channel Partner (SCP), Evotest at Evotest office on 22 February 2017.
A cutting-edge solutions provider of innovative, advanced and cost effective automated vision inspection system & equipment for the semiconductor and electronic packaging industries
Penang, Malaysia
Long-time IPC Volunteer, Doug Pauls Inducted into IPC Hall of Fame
Feb 16, 2017 | In recognition of his extraordinary contributions to IPC and the electronics industry, Doug Pauls, principal materials and process engineer, Rockwell Collins, was honored with the IPC Raymond E. Pritchard Hall of Fame Award. Presented at IPC APEX EXPO® on Tuesday, February 14 at the San Diego Convention Center, the IPC Hall of Fame Award represents IPC's highest level of volunteer recognition.
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
Juki Announces New CFO
Feb 16, 2017 | Juki Automation Systems announced this morning that Dave Frac is retiring and Andy Hirst will be taking his place as the new CFO of the company.
Juki Automation Systems Inc. is one of the worlds leading SMT placement companies with over 45,000 machines installed worldwide and is the pioneer of the modular automated assembly line. see www.jukiamericas.com for more info.
Morrisville , North Carolina, USA
Four Consecutive Service Excellence Awards is Convincing Industry Achievement.
Feb 16, 2017 | No one can accuse Europlacer of being anything other than consistently on-the-ball with its customer-centric service and support philosophy. The equipment manufacturer has picked up its fourth award in consecutive years from respected industry publication Circuits Assembly, in the Pick & Place Category. The award was presented to the President of Europlacer Americas, John Perrotta, at the APEX Expo in San Diego this week.
Europlacer designs and manufactures a comprehensive range of highly flexible SMT pick and place equipment for the global electronics industry, with a network of distributors across the globe.
Poole Dorset, United Kingdom
Nihon Superior Wins a 2017 NPI Award for the Latest SN100CVTM Lead-Free No-Clean Paste
Feb 16, 2017 | Nihon Superior announces that it has been awarded a 2017 NPI Award in the category of Soldering Materials for its SN100CV P506 D4 Lead-Free Solder Paste. The award was presented to the company’s President, Tetsuro Nishimura during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.
Nihon has been a leader in soldering and brazing since 1966. Nihon manufactures SMT solder joining materials e.g. lead-free solder (SN100C:Sn-Cu-Ni-Ge etc): solder paste, solder spheres, flux cored solder wire, solder bar, etc.
Osaka, Japan
IPC Elects New Board Member
Feb 16, 2017 | The Nominating and Governance Committee of the IPC Board of Directors presented one candidate for election at the IPC Annual Meeting on February 14, held in conjunction with IPC APEX EXPO 2017 at the San Diego Convention Center.
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
Automotive Electronics Leader, Sitronic GmbH, Selects FactoryLogix® MES System
Feb 16, 2017 | Aegis Software today announced that Sitronic GmbH & Co. KG, a German-based manufacturer of automotive electronic systems, has selected the company's award-winning FactoryLogix® manufacturing execution software (MES) to streamline operational efficiency and enhance quality and traceability for its automated assembly lines.
Aegis Industrial Software Corporation
Developers of State-of-the-Art Manufacturing Enterprise Automation Software
Horsham, Pennsylvania, USA
KYZEN Is Two for Two with the 2017 NPI Awards for the ANALYST™ and DS3522 DuoSolvent™
Feb 15, 2017 | KYZEN today announced that it received two 2017 NPI Awards. The company was awarded in the category of Process Control Tools for the new ANALYST™ Real-Time Concentration Monitoring & Reporting System, and Cleaning Materials for the KYZEN® DS3522 DuoSolvent™ Cleaning Agent. The awards were presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.
A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.
Nashville, Tennessee, USA
Viscom’s S3088 ultra gold wins the NPI Award for Test & Inspection – AOI
Feb 15, 2017 | Viscom announces that it has been awarded a 2017 NPI Award in the category of Test & Inspection – AOI for its 3D AOI system – S3088 ultra gold. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO. The S3088 ultra gold reaches image data rates of up to 3.6 gigapixels per second. The core of this system is the innovative high performance camera module XMplus with its outstanding, high throughput camera technology.
A leading provider of industrial image processing (AOI and AXI) Automated Optical and X-ray inspection equipment.
Hanover, Germany
The New Metcal Connection Validation™ Receives a 2017 NPI Award
Feb 15, 2017 | Metcal announces that it has been awarded a 2017 NPI Award in the category of Soldering – Hand Tools for its CV-5200 Connection Validation™ Soldering Station, as selected by an independent panel of practicing industry engineers. Evaluation of the award entries is based on several criteria, including innovation; compatibility with existing technology; cost-effectiveness; design, and more. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.
Manufacturer of high-performance precision rework systems for the electronics bench. Product lines include: Hand Soldering and Desoldering, Convection Rework products, Fume Extraction and Fluid Dispensing tools.
Cypress, California, USA
Nordson DAGE Receives the 2017 NPI Award for Test & Inspection – X-ray
Feb 15, 2017 | Nordson DAGE, a division of Nordson Corporation (NASDAQ: NDSN), today announced that it has been awarded a 2017 NPI Award in the category of Test & Inspection – X-ray for its Quadra™ 7. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.
The leading provider of award winning bond testing equipment and continues to invest significantly in research and development to remain at the cutting edge of bond tester technology.
Aylesbury. Buckinghamshire, United Kingdom
MIRTEC WINS PRESTIGIOUS 2017 SERVICE EXCELLENCE AWARD FOR TEST & INSPECTION
Feb 15, 2017 | MIRTEC, “The Global Leader in Inspection Technology,” announces that it received the prestigious 2017 Service Excellence Award (SEA) from Circuits Assembly magazine in the Test and Inspection category. Mike Buetow, Circuits Assembly’s Editor-in-Chief, presented the award to Brian D’Amico, President of MIRTEC’s North American Sales and Service Division during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center.
 (640x183).jpg)
MIRTEC has earned a solid reputation as one of the most Progressive and Dynamic Suppliers of Automated SMT Inspection Equipment to the Electronics Manufacturing Industry.
Oxford, Connecticut, USA
EVS Receives a 2017 NPI Award for Its EVS 500LF Solder Recovery System
Feb 15, 2017 | EVS International announces that it has been awarded a 2017 NPI Award in the category of Soldering – Other for its EVS 500LF Solder Recovery System. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.
World Leaders in Solder Recovery.
Cowes, United Kingdom
Datest Wins a 2017 NPI Award for Its PCBA/PCBF Reverse Engineering Service
Feb 15, 2017 | Datest announces that it has been awarded a 2017 NPI Award in the category of Test & Inspection – Functional Test for its PCBA/PCBF Reverse Engineering Service. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.
Datest: 30 years of testing and test engineering utilizing in-circuit, flying probe, boundary scan, and functional platforms. Also AXI/2D/3D x-ray, CT-scan failure analysis, and bonepile rehab of functional/field failures.
Fremont, California, USA
Data I/O’s PSV5000 with LumenXTM Programming Technology Wins a 2017 NPI Award
Feb 15, 2017 | Data I/O Corporation (NASDAQ：DAIO) announces that it was awarded a 2017 NPI Award in the category of Programming for the LumenX TM v1.2 integration with the PSV5000 automated programming system. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.
Count On Tools, Inc. Receives Its Third Service Excellence Award for Quality Products and Service
Feb 15, 2017 | Count On Tools announces that it has been awarded a 2017 Circuits Assembly Service Excellence Award (SEA) for its outstanding customer ratings, as judged by its own customers. Count On Tools was selected for the Automation and Handling Equipment category.
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
Gainesville, Georgia, USA
Cogiscan’s New Co-NECT Production Software Wins A 2017 NPI Award
Feb 15, 2017 | Cogiscan announces that it has been awarded a 2017 NPI Award in the category of Software – Production for its new Co-NECT Production Software. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO. This marks the company’s fifth consecutive NPI Award.
Cogiscan provides factory-wide electronics manufacturing traceability (TTC), MSD control, component set up verification, PCB assembly error-proofing, components inventory management.
Bromont, Quebec, Canada
Bill Astle Promoted to President of Juki
Feb 15, 2017 | Juki Corporation (Tama Center – Tokyo, Japan) and Juki Automation Systems (Morrisville, NC) are pleased to announce that William D. (Bill) Astle has been promoted to President of Juki Automation Systems, Inc. effective immediately. Bill has been serving as General Manager of JAS for the last three years. Robert J Black, Jr., former President and CEO, will remain with the company as CEO.
Juki Automation Systems Inc. is one of the worlds leading SMT placement companies with over 45,000 machines installed worldwide and is the pioneer of the modular automated assembly line. see www.jukiamericas.com for more info.
Morrisville , North Carolina, USA
Akrometrix Wins a 2017 NPI Award for Its Next Generation AXP Shadow Moiré System at APEX
Feb 15, 2017 | Akrometrix is pleased to announce that it has been awarded a 2017 NPI Award in the category of First Article Inspection for the new AXP 2.0. The award was presented to the company during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.
Leading provider of full-field metrology solutions for substrates and packages in the OEM/CEM/SATS/PCB segments of the microelectronics industry.
Atlanta, Georgia, USA
Juki Automation Systems and Storage Solutions Receive the 2017 NPI Award for Component Storage
Feb 15, 2017 | Juki Automation Systems today announced that the companies were awarded a joint 2017 NPI Award. The award was presented to the companies in the Component Storage category for the new ISM UltraFlex 3600 during a Tuesday, Feb. 14, 2017 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO.
Juki Automation Systems Inc. is one of the worlds leading SMT placement companies with over 45,000 machines installed worldwide and is the pioneer of the modular automated assembly line. see www.jukiamericas.com for more info.
Morrisville , North Carolina, USA
EMS Specialist Ryder Industries Receives ISO 16949 Certification at Xinfeng Plant
Feb 15, 2017 | Ryder Industries has announced that it has been successful in obtaining ISO 16949 certification. ISO/TS 16949 is regarded as the world’s foremost quality standard for the automotive industry, and realizes cost savings through improved process effectiveness and efficiency.
A Swiss-owned developer and manufacturer of electronics products, providing superior total value EMS services.
Shenzhen, China
Breaking News from Juki Automation Systems
Feb 15, 2017 | Juki Automation Systems, Inc. of Morrisville, NC and the Feeder Finger Division of Automation Technical Services, Inc. of San Diego, CA announce today an agreement, under which Juki will incorporate ATS’s Feeder Finger into several models of Juki Feeders.
Juki Automation Systems Inc. is one of the worlds leading SMT placement companies with over 45,000 machines installed worldwide and is the pioneer of the modular automated assembly line. see www.jukiamericas.com for more info.
Morrisville , North Carolina, USA
Preview for Seica for IPC Apex 2017, San Diego -- Booth 1933 - Expanded Lines of Test and Assembly Equipment
Feb 14, 2017 | Seica will be exhibiting at the Apex show held in San Diego this year showing our expanding lines of test and assembly equipment. The automated Pilot4DV8 will be showcased fully automated in a batch line environment. The automated solution will demonstrate a magazine and conveyance solution that will allow customers to load different board part numbers for automated testing.
SEICA offers innovative ATE solutions which range from Bare Board Test, Flying Probe Systems, In-Circuit and Combi Test to Functional Test.
Strambino, Italy
Nordson ASYMTEK's Redesigned EasyCoat 6 Conformal Coating Software Delivers a Rich Feature Set and Simplifies Programming
Feb 13, 2017 | Nordson ASYMTEK introduces its upgraded EasyCoat® 6 software for its Select Coat® SL-940 conformal coating system. EasyCoat 6 software combines several powerful capabilities to deliver a visual programming experience that reduces programming time, increases throughput and productivity, and achieves high quality conformal coating results. Key features include drag-and-drop graphical overlay programming, online and offline programming, and Applicator Tip Tracking. The new look of the user interface includes updated iconography, new color schemes, and a variety of customizable settings to personalize the programming environment.
Metcal Introduces the Next Big Step in Process Control: Connection Validation™
Feb 13, 2017 | Metcal’s CV-5200 Connection Validation™ Soldering Station provides real-time closed loop feedback on intermetallic compound formation— the world’s first. Plus, a new communication port enables process traceability and firmware upgrades.
Manufacturer of high-performance precision rework systems for the electronics bench. Product lines include: Hand Soldering and Desoldering, Convection Rework products, Fume Extraction and Fluid Dispensing tools.
Cypress, California, USA
KYZEN to Launch the New Industry 4.0 Enabled KYZEN ANALYST™ at productronica China
Feb 13, 2017 | KYZEN today announced plans to introduce the new KYZEN ANALYST™ in Stand E3-3200 at productronica China, scheduled to take place March 14-16, 2017 at the Shanghai New International Expo Centre.
A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.
Nashville, Tennessee, USA
Tergo™ Chlorine-Free Cleaning Fluid Now Available in EU
Feb 13, 2017 | MicroCare Europe bvba has introduced a unique and innovative chemistry, Tergo™ Chlorine-Free Cleaning Fluid to the continent. This is a totally new formulation which enables faster, better and less expensive cleaning while meeting stringent EU environmental regulations.
The leading supplier of cleaners and lubricants for critical environments.
New Britain, Connecticut, USA
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398
