V-CUT PCB Separator
Model: |
V-CUT PCB Separator |
Category: |
|
Model Year: |
2015 |
Condition: |
|
Location: |
China |
Offered by: |
Product Features:
1.Connecting multiple pieces of board after soldering,break often hurt line or broken electronic component. the machine in order to take the knife type segmentation can radically reduce stress, prevent fracture of the solder joint cracking and parts, improve production efficiency and quality
2.Using a flat knife sword round way, as for the lower plate flat knife, a foot switch, the circular knife traverse move to the set point, about to cut off the split aluminum plate, cut off but no the wire, cut flat, no burr.
Product information:
1.Completely independent development, using microcomputer program control, fixed-point precision, strong stability. Cut off single slat within 0-460MM long one time.
2.Board cutting speed can be set high and low two kinds ,the speed 500mm / S and 300mm / S
3.The knife wheel walking knife stroke: 0-460mm. Under the knife wheel height fine adjustment: 0-2mm to suit a variety of aluminum substrate thickness. solving the problem of V-CUT aluminum substrate groove depth. Operation desk height can be adjusted: 0-50mm.
4.Take the knife stroke can be set forward to stop point with the board length, Stop point manually.
5.Tailgate depth range: 0-150mm. The maximum cutting width plate: 150mm, maximum cutting length plate: 400mm, maximum thickness of the plate: 0.2-3.2mm, V groove between the maximum thickness: 0.25-2.0mm
6.on and under knife for imported high speed steel material, extremely durable, while unfavorable knife can regrind.
7.Can plus supporting conveyor another, Convenient PCB which cut well is sent out automatically
Company Information:
