The 8753ES RF network analyzers ease of use and high performance make it ideal for use in research and development as well as on the production floor. The integrated S-parameter test set covers ranges from 30 kHz to 6 GHz and it has a 110 db dynamic range. With its four independent channels displ...
|
Test Equipment |
The HP Agilent 8720D Network Analyzer features a frequency range of 50 MHz to 20 GHz, a drastically faster processor compared to earlier versions, a built-in fast sweeping synthesized source, an integrated solid-state switching S-Parameter Test Set, Vector Receiver, Error Correction and the tu...
|
Test Equipment |
Keithley's SourceMeter family is designed specifically for test applications that demand tightly coupled sourcing and measurement. All source-measure models provide precision voltage and current sourcing as well as measurement capabilities. Each SourceMeter instrument is both a highly stab...
|
Test Equipment |
Description
The Infiniium family's Agilent 54845A provides the performance you need for your most demanding signals. 1.5 GHz bandwidth and a sample rate of up to 8 GSa/s ensure fast, accurate capture of your waveforms. Like the other Infiniium models, the Agilent 54845A's ea...
|
Test Equipment |
The Agilent-HP 87512B transmission/reflection test kit provides the capability
to measure the reflection and transmission characteristics of 75 ohm
devices up to 2 GHz with a network analyzer. The test port of the
Agilent 87512B is a 75 ohm type N(f) connector....
|
|
The 80E04 is a dual-channel Time Domain Reflectometry (TDR) sampling module. This sampling module provides an acquisition rise time of 17.5 ps or less, with a typical 20 GHz equivalent bandwidth for use in Transmission Line Quality, Impedance Measurements, Crosstalk Measurements applications.<...
|
Test Equipment |
Description
The 54855A Infiniium oscilloscope and InfiniiMax 1134A probing system, (1134A probe amp plus the E2668A single-ended connectivity kit and/or E2669A differential connectivity kit), provides full real-time bandwidth of up to 7 GHz and is supported on every channel by the 20 G...
|
Test Equipment |
The Fluke 87V has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. The 87V operates very similar to the classic 87, but with more problem-solving p...
|
Test Equipment |
The Agilent/HP 8753ES S-parameter vector network analyzer is a cost-effective solution for characterization of the RF components.
The built-in transmission/reflection (T/R) test set has a full range of magnitude and phase measurements in the forward direction. The 8753ES has an inte...
|
Test Equipment |
*Product comes with items in photograph*
Digital Phosphor Oscilloscope; 500 MHz, 4 Channels
The TDS3000C Series digital phosphor oscilloscopes (DPO) provide you with the performance you need at a price you can afford. Bandwidths range from 100 MHz to 500 MHz, with up to 5 GS...
|
Test Equipment |
The Fluke 5790A AC Measurement Standard is a Complete automated ac measurement standard designed for the most demanding calibration applications. It combines the accuracy you would expect from a thermal transfer standard with the ease-of-use of a digital multimeter. Absolute ac voltage...
|
Test Equipment |
The Agilent 8595E is an easy-to-use RF spectrum analyzer that offers a wide range of performance, features, and optional capability to meet your measurement needs. Downloadable measurement personalities combine with optional plug-in performance to provide tailored solutions for your applicatio...
|
Test Equipment |
The Agilent E8357A vector network analyzer is a member of the PNA Series network analyzer platform and provides the combination of speed and precision required for testing components. The PNA Series meets this testing challenge by providing the right combination of fast sweep speeds, wide dyna...
|
Test Equipment |
Items were pulled from a working Lab Environment, no further testing has been done.
The Agilent E4433B RF signal generator offers a wide range of digital modulation capabilities for research and development, manufacturing or troubleshooting applications. Providing a comprehensive fe...
|
Test Equipment |
The Agilent 11793A microwave converter downconverts microwave signals to the frequency range of the Agilent 8902A measuring receiver. For signals above 1.3 GHz, the 11793A routes the signal through its internal mixer. Below 1.3 GHz, signals are routed directly to the input of the 8902A. The 11...
|
Test Equipment |
Inlcudes: 8510C, 8510XF, 83651B, 83621B, E7352L, & E7352R
The 8510XF systems have been designed to make fully- calibrated, single-sweep measurements of broadband devices to 110 GHz, in 1.0 mm coax. By building on the 8510 network analyzer’s capabilities, t...
|
Test Equipment |
The R&S SMA 100A combines superior signal quality with very high setting speed, which makes it ideal for any task. Whether in development, production, service or maintenance, the R&S SMA 100A does an excellent job.
In the frequency range from 9 kHz to 6 GHz, it can generate ...
|
Test Equipment |
The LeCroy 9100 series of Arbitrary Function Generators are high performance ATE or bench-top instruments which can generate either standard or user defined, complex waveforms with fine point to point time resolution.
Main Features:
Custom waveforms fro...
|
Test Equipment |
The LeCroy 9100 series of Arbitrary Function Generators are high performance ATE or bench-top instruments which can generate either standard or user defined, complex waveforms with fine point to point time resolution.
Main Features:
Custom waveforms fro...
|
Test Equipment |
The Agilent E8358A vector network analyzer is a member of the PNA Series network analyzer platform and provides the combination of speed and precision required for testing components. The PNA Series meets this testing challenge by providing the right combination of fast sweep speeds, wide dyna...
|
Test Equipment |
The Agilent 83752A sweeper brings outstanding synthesized performance to the component-test marketplace. It delivers the best performance for the price in general purpose benchtop, swept test or scalar applications. This sweeper provides superior accuracy and stability while maintaining the sp...
|
Test Equipment |
Digital Storage Oscilloscope:
* Bandwidth: 100 MHz
* Sample Rate: 500 MS/s on each channel
* Channels: two identical channels, each with invert function
* Sensitivity: 2 mV to 10 V/div
* Vertical Resolution: 8 bits (256 levels over 10.24 vertical divi...
|
Test Equipment |
The Anritsu S331D spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept th...
|
Test Equipment |
The Chroma 6314A 1200W and 6312A 600W electronic load mainframes accept the user-installable 6310A series load modules for easy system configuration and will mount in a 19" instrument rack. The 6314A holds up to four 63102A load modules, which will result in an 8-channel 100W/channel load...
|
Test Equipment |
As a member of Pacific's ASX-Series family of high performance AC Power Sources the 115ASX offers the low acoustic noise, ease of installation, and maximum power density found in all of Pacific's high frequency, pulse width modulated AC Power Sources. Control and operational features p...
|
Test Equipment |
Features:
• instrument model with built-in power supply, 110V/220V operation
• high power output at 3.5dB compression, 42dBm typ.
• high reverse isolation, 55 dB typ.
• 100% burn-in at +25°C, 48 hrs
&bull...
|
Test Equipment |
The Agilent 3458A Multimeter, recognized the world over as the standard in high performance DMMs, provides both speed and accuracy in the R&D lab, on the production test floor, and in the calibration lab. The Agilent 3458A is simply the fastest, most flexible, and most accurate multimeter ...
|
Test Equipment |
The Agilent PNA-L vector network analyzer is a member of the PNA series network analyzer platform and is designed for your general-purpose network analysis needs.
Key Features & Specifications
Integrated 4-port, balanced measurements
&nbs...
|
Test Equipment |
Bandwidth 1 GHz
Number of Channels 4 ch
Simultaneous Maximum Sampling Rate/ch 500 MSa/s
One ch. only max. sampling rate 2 GSa/s
Max. Record Length 32678 pt/sec
...
|
Test Equipment |
The AM700 is an easy-to-use, high performance audio analyzer. It combines the capability to make conventional electronic audio measurements with more advanced measurements designed for emerging audio technologies.
The AM700 accepts balanced and unbalanced analog signals as well as A...
|
Test Equipment |
The 8753E RF vector network analyzer provides all the performance and productivity features to simplify and speed your component measurements in the 30 kHz to 6 GHz frequency range.
Its new processor makes measurement and data-transfer speeds up to seven times faster than the previo...
|
Test Equipment |
Featuring fast frequency, amplitude, and waveform switching, high power with an electronic attenuator, and high reliability – all in two rack units (2RU) – Agilent MXG vector is optimized for manufacturing cellular communications and wireless connectivity components. Agilent N5182A...
|
Test Equipment |
The SME03 is a favorably priced signal generator for applications in the 5 kHz to 3 GHz frequency range.
The SME supplies the complex signals required for the development and testing of digital mobile radio receivers. It is capable of generating all signals used in the main digital ...
|
Test Equipment |
The 8753E RF vector network analyzer provides all the performance and productivity features to simplify and speed your component measurements in the 30 kHz to 6 GHz frequency range.
Its new processor makes measurement and data-transfer speeds up to seven times faster than the previo...
|
Test Equipment |
The 8753E RF vector network analyzer provides all the performance and productivity features to simplify and speed your component measurements in the 30 kHz to 6 GHz frequency range.
Its new processor makes measurement and data-transfer speeds up to seven times faster than the previo...
|
Test Equipment |
The Rohde & Schwarz FSEB30 is a 20Hz to 7GHz, Spectrum Analyzers. The FSE spectrum analyzers from Rohde & Schwarz have been optimized both for general-purpose measurements and meeting the stringent requirements of testing advanced digital communication systems.
&...
|
Test Equipment |
The 4231 is designed to safely analyze floating signals. The built in amplifier scales and converts the high voltage differential input to a low, voltage single-ended BNC output, compatible with any oscilloscope. The inputs are useful in measurements of power semiconductor circuits, robotic dr...
|
Test Equipment |
The Agilent 8594E is an easy-to-use RF spectrum analyzer that offers a wide range of performance, features, and optional capability to meet your measurement needs. Downloadable measurement personalities combine with optional plug-in performance to provide tailored solutions for your applicatio...
|
Test Equipment |
Wiltron 3114 60CM DC-18GHz 1-720 Degree/GHz Variable Delay Line RF Component.
http://www.ebay.com/itm/Wiltron-3114-Variable-Delay-Line-RF-Component-/161077694151?pt=LH_DefaultDomain_0&hash=item2580fa8ec7
...
|
Test Equipment |
Performs GPIB interfacing between computer/controllers and ROD-L Hipot, Ground Continuity and Insulation Resistance Testers
Remove manual operators from the electrical safety test process to ensure maximum test consistency ad the minimize operator hazards.
Log and analyze...
|
Test Equipment |
Items were pulled from a working Lab Environment, no further testing has been done.
Associated Research 403AI A.C. Junior Hypot.
http://www.ebay.com/itm/Associated-Research-403AI-A-C-Junior-Hypot-/161077717342?pt=LH_DefaultDomain_0&hash=item2580fae95...
|
Test Equipment |
The Agilent 85046A test set provides the capability to simultaneously measure the transmission and reflection characteristics of 50 ohm devices. The test set is controlled from the analyzer and includes programmable step attenuators. It can be used with the Agilent 8753A/B/C, 8753D/E/ES Option...
|
Test Equipment |
The Agilent 85107B microwave vector network analyzer is a complete system configured with an Agilent 8510C vector network analyzer, a 50 GHz S-parameter test set, a 50 GHz synthesized sweeper, and 2.4 mm measurement accessories. Option 005 adds step attenuators and bias tees to the test set; o...
|
Test Equipment |
The Agilent 8657B offers excellent performance at an economical price. The low residual FM and excellent phase noise performance of these signal generators make them ideal for many in-channel and even out-of-channel receiver tests. The Agilent 8657B is a versatile signal generator offering a v...
|
Test Equipment |
The AMIQ04 is a dual channel modulation generator engineered for use as an I/Q source for use with complex communication systems. It is programmed and set with WinIQSIM or can be operated from an SMIQ series signal generator. Each channel of the AMIQ04 can store up to 16,000,000 samples. Seque...
|
Test Equipment |
The AMIQ04 is a dual channel modulation generator engineered for use as an I/Q source for use with complex communication systems. It is programmed and set with WinIQSIM or can be operated from an SMIQ series signal generator. Each channel of the AMIQ04 can store up to 16,000,000 samples. Seque...
|
Test Equipment |
This Regulated DC Power Source is suitable for general laboratory and industrial applications. Each unit contains two sources in a single case. Each source may be operated independently or combined in a series of parallel arrangement. In addition, each output maybe operated in either constant ...
|
Test Equipment |
Key Features and Specifications
Measurement of Real, Imaginary and Total Current
Ground Fault Interruption (GFI) for operator safety
Programmable Ramp, Test and Fall Times
Storage of ...
|
Test Equipment |
The Rod-L M150AC Hipot Test Instrument is a rugged, self-contained tester designed for both laboratory and production use. The main purpose of the M150AC is provide a means of evaluating the dielectric withstand capabilities of the DUT.
Specifications:
...
|
Test Equipment |
The ADA400A Differential Preamplifier allows direct oscilloscope measurements of very low amplitude voltages and signals which are not ground referenced. The high impedance of both inputs eliminates the need to add additional ground points in the DUT, thereby avoiding circulating currents whic...
|
Test Equipment |