Dynamic Engineering Products

SMT Products and Services offered by Dynamic Engineering

SMTnet
»
SMT / PCB Products and Services
»
Dynamic Engineering
»
Dynamic Engineering Products

Dynamic Engineering

Design and Manufacturing Services. HW, Schematic, FPGALayout, Assembly, prototype, production, test »»

Headquarters: Santa Cruz, California, USA

Consultant / Service Provider, Manufacturer, Manufacturer, Manufacturer Manufacturer

9 listed by Dynamic Engineering

Product	Category
VME 6U Cool http://www.dyneng.com/vme.html#VMEcool6U 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. 6U size (Also Available in cPCI)...
cPCI 6U Cool cPCI-6U-COOL has 12 positions for Fans to be mounted. In a chassis with adequate side wall venting all of the positions can be filled. For a chassis with sealed side walls and lid at most 6 positions should be filled to allow for air re-circulation. The fans can be mounted to blow from the back to t...
HDEterm50 Ribbon cable headers are commonly used with IP compatible hardware. Ribbon cable is difficult to connect to other hardware, especially if multiple destinations are involved. The HDRterm50 terminal converts from 50 pin ribbon cable to a 50 pin terminal strip. Discrete wires are easily connected with...
PCI LVDS 8T The PCI-LVDS-8T PCI card has 8 channels of LVDS output (8T), digital filtering and storage. The PCI-LVDS-8T is compatible with TIA/EIA-644 LVDS standards. The card features "Scatter gather" DMA data transfer by Dynamic Engineering....
IP-Biserial IO The serial Input and Output channels are highly programmable and fully independent. The standard interface offers Data, Clock and Strobe. The programmable output rates and a user oscillator position allow for flexible frequency selection. RS422/485 and TTL compatability will interface to a variety o...
Design Full design service - from concept to production. Hardware, embedded software, board layout, assembly and test. PCI, cPCI, IndustryPack, PMC, VME, PCMIP etc. http://www.dyneng.com...
PMC, IP, PCI, cPCI, embedded mezzanine boards Visit our web site to view our complete product line. http://www.dyneng.com...
Assembly Dynamic Engineering designs, manufactures, assembles and tests mezzanine level boards. Submit your assembly requirements for quotation. Sales@dyneng.com...
Test, debug, adapters Dynamic Engineering test tools....

Product

VME 6U Cool

http://www.dyneng.com/vme.html#VMEcool6U 12 position fan board with options for Forward or Reverse Direction air flow, zero slot fan technology, 5V or 12V operation. 6U size (Also Available in cPCI)...

cPCI 6U Cool

cPCI-6U-COOL has 12 positions for Fans to be mounted. In a chassis with adequate side wall venting all of the positions can be filled. For a chassis with sealed side walls and lid at most 6 positions should be filled to allow for air re-circulation. The fans can be mounted to blow from the back to t...

HDEterm50

Ribbon cable headers are commonly used with IP compatible hardware. Ribbon cable is difficult to connect to other hardware, especially if multiple destinations are involved. The HDRterm50 terminal converts from 50 pin ribbon cable to a 50 pin terminal strip. Discrete wires are easily connected with...

PCI LVDS 8T

The PCI-LVDS-8T PCI card has 8 channels of LVDS output (8T), digital filtering and storage. The PCI-LVDS-8T is compatible with TIA/EIA-644 LVDS standards. The card features "Scatter gather" DMA data transfer by Dynamic Engineering....

IP-Biserial IO

The serial Input and Output channels are highly programmable and fully independent. The standard interface offers Data, Clock and Strobe. The programmable output rates and a user oscillator position allow for flexible frequency selection. RS422/485 and TTL compatability will interface to a variety o...