The E33-1 has a cutting length infinitely and easily adjustable, drive by hand crank or electric motor drive (E 33-1M option). Additionally, its possible to cut directly on the belt, and maintenance-free due to the robust construction. ...
|
Lead Forming |
This bending and cutting device for axially taped components is perfectly versatile for the processing of components and wire bridges. No tools required for setting the grid size and leg length. Also, its maintenance-free because of robust construction and reliable reproduction of given values using...
|
Lead Forming |
The C 043 is an axial trimmer and former. With this new cutting and bending machine, you have the ability to work with axial lying and standing components. With only a few grips and less than five minutes, this machine is robust enough to change from one component variant to another. There are multi...
|
Lead Forming |
This universal and progressive machine is ideal for the processing axial components. The E 400 allows for gradual adjusting of cutting units, pitches and length of components, as well as speed. The bending components come with a special roller design, so that the components can't be damaged ...
|
Lead Forming |
The C 066 MA is a cutting device for radially belted components with compensation of belt tolerances. With this device, all components radially, according to the IEC specs, can be cut to size from the belt. Lastly, the integrated contact device for components eliminates the belt tolerance. ...
|
Lead Forming |
This machine is inexpensive, universal cutting and bending device for loose, radial components. The pneumatic basic unit comes with your necessary cutting plate or with a mounting plate for beading tools. Furthermore, 2,3,4 and 5mm plates are available for cutting components. Lastly, a wide range of...
|
Lead Forming |
This machine is an inexpensive, universal cutting and bending device for loose, radial components. The pneumatic basic unit comes with your necessary cutting plate or with a mounting plate for beading tools. Furthermore, 2,3,4 and 5mm plates are available for cutting components. Lastly, a wide range...
|
Lead Forming |
The C 057 is used to cut the end wires to the length you need. This includes components with axial and radial wire connections, including IC's. Female connectors can also be cut with this. An obliquely positioned knife is moved under the cutting plate over the entire work surface, ehich mean...
|
Lead Forming |
This pneumatically driven device has a very robust cutting knife with angle cutting. Its mainly useful for cutting D-SUB, pin and plug-in strips or components with thick connecting wires. Lastly, the cutting plate is provided with perforated grids and available for cutting lengths from 2.0mm - 5.0mm...
|
Lead Forming |
An automatic cutting and bending device for radial component, power transistors of the TO126 / TO220 / SOT design. The E120 has special features including: effortless tool change, high ease of use, feed channel. Also, you can easily change and adjust the machine using a micrometer screw. Additionall...
|
Lead Forming |
It is an automatic bending and cutting machine for radial components. This high end product solves all tasks related to component preparation for radial components. Thanks to the modular design, you can convert the device to another application at any time. Additionally, this has user-friendly handl...
|
Lead Forming |
The EBSOMAT is specifically made for the economical processing of taped components. Despite manual operation, a production speed of arounf 10,000 components per hour is achievable. In order to be able to process even more efficient components, the EBSOMAT 300 has a motor set. This means that you can...
|
Lead Forming |
This bending and cutting device for axially taped components is perfectly versatile for the processing of components and wire bridges. No tools required for setting the grid size and leg length. Also, its maintenance-free because of robust construction and reliable reproduction of given values using...
|
Lead Forming |
The E 33-1M is a cutting device for radially taped components and has a cutting length that's infinitely and easily adjustable. It comes with electric motor drive. Additionally, its possible to cut directly on the belt and is maintenance-free due to the robust construction. ...
|
Lead Forming |
Getech's Automatic Labeling Machine is a high speed inline label placer of pre-printed label from an automatic label feeder to PCB. The ALP utilizes X-Y linear axes for the movement of the end effector which houses the acuum pick-up head. Pre-printed labels are directly fed by an au...
|
Pick & Place |
The GSR1280 is a standalone router machine specially designed to route (depanelize) large panels with PCB sizes of 500mm x 500mm into individual units. It is capable of speeds of up to 100mm/s and positioning speeds of 1000mm/s. It has two worktables that allows continuous routing with no s...
|
Depaneling |
The GAR is a dual workstation inline router machine for PCBA's. Equipped with Getech's new Graphical User Interface, "Move, Teach & Cut", the GAR has a user-friendly visual programming experience for rapid and accurate machine control. <...
|
Curing Equipment |
The GSR1290 is a single workstation standalone router which can handle large panel sizes up to 910mm x 610mm (35.5 x 24").
The GSR Series standalone routers are designed to high performance and cost-effective solutions to meet your PCB depaneling requirements.&l...
|
Depaneling |
The GSR1200E is a single table standalone router machine that is specially designed to route (depanelize) large panels with PCB size up to 500mm x 450mm into individual units. It is capable of speeds up to 100mm/s and positioning speeds of 1000mm/s. The superior servo axis system provides h...
|
Depaneling |
The GSS1200 is a high speed dual workstation stand-alone sawing machine for PCBA's.
The machine uses a rotary axis driven by a direct drive motor for the movement of the spindle head. It is also equipped with a deticated gripper fixture to maximize machine output...
|
Depaneling |
THE GSR1280E is a single table standalone router machine that is specially designed to route (depanelize) large panels with PCB size of 610mm x 610mm into individual units. it is capable of speeds up to 100mm/s and positioning speeds of 1000mm/s. The superior servo axis system provides high...
|
Depaneling |
THe GSR2280 is a dual workstation standalone router and is known as the world's fastest router with a cycle rate of only 0.3 seconds per tab.
It can accommodate larger PCB's with maximum panel size of 550mm x 585mm (21.5" x 23").
|
Depaneling |
The GSR1200 is a standalone router machine specifically designed to route (depanelize) large panels with PCB size of 350mm x 350mm into individual units. It is capable of speeds of up to 100mm/s and positioning speeds of 1000mm/s. It has two worktables that allows continuous touring with no...
|
Depaneling |
The SPR is a machine designed for high speed routing and high volume production of small PCB panels. The solution for high volume smartphone PCB's.
KEY FEATURES
Assets:
|
Depaneling |
The GBR is an inline bottom router machine for PCBA's that does not require PCB-specific fixture systems. It is ideal for OEM's and CEM's who have lower volumes and where there is significant product variety.
Equipped with Getech'...
|
Depaneling |
The RBM is a sophisticated and versatile fully-automated dual station depaneling system. It is fitted with an auto conveyor width adjustment feature and also has various other toold to optimise the routing process based on your workflow.
PANEL...
|
Depaneling |
The GLMS2000 is an inline laser marking machine capable of handling large format heavy PCBs, ultra-thin and flexible PCBAs.
It is capable of marking in a wide range of formats, including 1D barcodes, 2D matrixes, QR codes, human readable characters and image fonts. Machi...
|
Printing |
This MP Dry Cabinet is a top level dry storage cabinet with a heating element. Additionally, its purpose is to contain PCB's and all MSD level components with an even larger volume. Furthermore, its an insulated double metal sandwich construction. A precise temperature of 60°...
|
Board Handling - Storage |
This MP Dry Cabinet is a mid level dry storage cabinet. it has a heating element made to contain PCB's and all MSD level components with a slightly larger volume. In fact, its and insulated double metal sandwich construction. A precise temperature of 60° C is achievable with...
|
Board Handling - Storage |
The quality automation and ease of use Youngpool provides is unmatched. The D-600P Automatic Splicing Machine from Youngpool Technologies is looking to shake up the SMT industry, on a budget. It can improve line utilization, half
|
Tape and Reel Equipment |
This conveyor helps link more specialized machines together, as well as other conveyors.
• SMEMA Interface
• Work and pass mode
• Durable structure with double base plate
• Bu...
|
Board Handling - Conveyors |
This conveyor allows for contact with the engineer, for transportation to a work table for inspection.
• SMEMA Interface
• Durable structure with double base plate
• Buzzer
• ...
|
Board Handling - Conveyors |
This conveyor controls flow and lanes of PCB traffic. For example, two PCB's can go in and one can come out.
• SMEMA interface
• Touchscreen
• 1-IN/1-OUT, 1-IN/2-OUT, 2-IN/1-OUT, and 2-IN and 2-OU...
|
Board Handling - Conveyors |
Conveyor that helps change PCB's on a fixed rail system to a different fixed rail system.
• SMEMA interface
• Touchscreen
• Durable structure with double base plate
• ...
|
Board Handling - Conveyors |
Conveyor for vertically turning the PCB's.
• SMEMA Interface
• Durable structure with double base plate
• Shock absorber for PCB holding
• Safe inverting system with d...
|
Board Handling - Conveyors |
Conveyor for rejecting faulty PCB's within the assembly line.
• SMEMA Interface
• Durable structure with double base plate
• NG, inspection and pass mode
• Touchscreen...
|
Board Handling - Conveyors |
A station for scanning PCB's. Allows for traceability throughout the manufacturing and packaging process.
• Manual adjustment of barcode position
• Manual barcode height adjustment
• Top surface b...
|
Board Handling - Conveyors |
These chain conveyors are primarily used to transport heavier PCB/pallet loads.
• SMEMA Interface
• Work and pass mode
• Durable structure with double base plate
• Button oper...
|
Board Handling - Conveyors |
Cools down recently soldered PCB boards.
• SMEMA Interface
• Work and pass mode
• Durable structure with double base plate
• Button operation
• Co...
|
Board Handling - Conveyors |
This conveyor is specialized for feeding PCB's into specific assembly processes.
• Always-on driven
• Adjustable angle for conveyor
• Conveyor speed control
&bull...
|
Board Handling - Conveyors |
Usually placed torwards the end of a production line. Outfeeds products within their respective processes.
• Always-on driven
• Adjustable angle for conveyor
• Conveyor speed control
&...
|
Board Handling - Conveyors |
This unit is used for transferring of PCBs/pallets in the production line.
• Customized
• Always-on driven
• Clearance (upper – 25mm / lower – 25mm) at conveyor...
|
Board Handling - Conveyors |
This unit is used for unloading of PCBs from the production line.
• SMEMA Interface
• Top & Bottom pneumatic clamps to secure magazine rack
• 3 color LED light tower
•...
|
Board Handling - Conveyors |
This unit is used for loading of PCBs to the production line.
• SMEMA Interface
• Top & Bottom pneumatic clamps to secure magazine rack
• 3-color LED light tower
• Buz...
|
Board Handling - Conveyors |
This unit is used for loading of PCBs.
• SMEMA Interface
• Top & Bottom pneumatic clamps to secure magazine rack
• 3-color LED light tower
• Buzzer
...
|
Board Handling - Conveyors |
This unit is used for loading of PCBs in assembly lines.
• Lower magazine protects operators from back strain
• SMEMA Interface
• Top & Bottom pneumatic clamps to secure magazine rack
&...
|
Board Handling - Conveyors |
This unit is used for removing dust, particles, glass fiber & etc on bare PCBs surface.
• SMEMA Interface
• For bare board
• PCBs placed at front
• 3-color LED light t...
|
Board Handling - Conveyors |
Loader of BOAT special components (PCB).
• High precision control by servo motor
• SUS frame in magazine contact area
• BOAT / PCB insertion prevention sensor
• No scratches o...
|
Board Handling - Conveyors |
This unit is used for loading of bare PCBs to the production line.
• SMEMA Interface
• For bare board and small PCB
• Pneumatic release of stacked boards one by one
• Adjustab...
|
Board Handling - Conveyors |
This unit is used for loading of PCBs from the production line.
• SMEMA Interface
• Top & Bottom pneumatic clamps to secure magazine rack
• 3-color LED light tower
• B...
|
Board Handling - Conveyors |