DGBELL Temperature cycling test chamber is suitable for testing various performance indexes of aerospace products, electronic instruments, materials, electronic products and various electronic components under the condition of rapid temperature change....
|
Test Equipment |
Relevant standards requirements
Single Storage Cell Safety Test
Dropt testing steps:
Charge the single storage cellaccording to 6.1.3
Drop the positive negative terminals of the cel...
|
Test Equipment |
DGBELL battery crush nail penetration tester is used to simulate the use, transportation, storage and disposal of various types of batteries under certain temperature conditions, when the battery is crushed (such as compacted garbage) or nail penetration, and to judge the battery safety performance....
|
Test Equipment |
Application: Battery Module / Battery Pack / Battery System crush test, penetration test.
Drive Mode: Electro-hydraulic Servo
Crush Tool: Semi-cylinder, hemisphere (According to test standard)
...
|
Test Equipment |
Application: Single cell crush test (cylinder, pouch, prismatic cell, etc)
Crush Tool: Semi-cylinder, hemisphere (According to test standard)
...
|
Test Equipment |
DGBELL Thermal abuse test chamber protect for short circuit caused by incorrect operation of the operator and battery electrode, battery positive and negative connection, etc...
|
Test Equipment |
Relevant standards requirement:
Single Storage Cell Safety Test
6.2.4 Short circuit
Charge the single storage cellaccording to 6.1.3 standard
The cellis to be short-circuited by connecting t...
|
Test Equipment |
DGBELL Walk in Explosion-proof Chamber is mainly used to test the safety performance of lithium ion battery, battery pack. Prevent test operators and other test equipment from being burned and exploding. At the same time, the explosion-proof test chamber with the smoke exhaust system can discharge t...
|
Test Equipment |
DGBELL Walk in dust-proof test chamber provide a simulated sand blowing and dusting environment. It can continuous operation for a long time without failure....
|
Test Equipment |
Relative Standard test requirements
Test Object: battery pack and system
Test Conditions: Altitude 4000m or the equate air pressure condition, atroom temperature.
The test objects stay in the test condition as It...
|
Test Equipment |
DGBELL Thermal runaway test machine test the whole vehicle or the complete vehicle-borne ion battery system or the subsystem of vehicle-borne lithium-ion battery system, including a lithium ion battery and an electrically connected lithium ion battery. The applicable standard is UL 2580, IEC 62619....
|
Test Equipment |
Application: Battery Module, Battery Pack, Battery System short circuit.
Short Circuit Mode: Pneumatic drive contact + Vacuum Interrupter...
|
Test Equipment |
DGBELL external fire exposure test machine is applicable to the standard UL 2580....
|
Test Equipment |
Relevant standards requirement:
Test Object: Battery storage pack or system.
The test object connects all the wiring harness, connector and other parts according to the whole vehicle connection mode. Select one of the following two me...
|
Test Equipment |
Relevant standards requirement:
Temperature shock
Test Object: Battery storage pack or system.
Li-ion battery pack or system placed in (-40±2)℃~(85±2)℃ alternation temperature, the conversio...
|
Test Equipment |
Application: Battery Module / Battery Pack / Battery System crush test, penetration test.
Drive Mode: Electro-hydraulic Servo
Crush Tool: Semi-cylinder, hemisphere (According to test standard)...
|
Test Equipment |
Single storage cell safety test
Test object: Battery storage pack or system
Rotate the battery pack 360°around X axis with rotation speed of 6°/s; secondly rotate it 90°,180°,270°,360°,and...
|
Test Equipment |
Relevant standards requirement:
Test object: battery pack and system
Test procedure: The test object is most likely to fall in the direction of actual maintenance or installation. If it is not possible to determine the most likely fal...
|
Test Equipment |
DGBELL Vibration Test System is a simulation of the various environments encountered in the manufacturing, assembly, transportation and use phases of execution. It is primarily used to identify the ability of a product to withstand environmental vibrations....
|
Test Equipment |
DGBELL shock test system used to measure and determine the impact resistance of a product or package. It is mainly used to evaluate the reliability of the function and the integrity of the structure of the test product under impact environment. Suitable for impact testing of aerospace, aerospace, ma...
|
Test Equipment |
DGBell’s Temperature Cycling test chamber is performed on materials to determine the resistance of exposure to alternating extremes of high and low temperatures....
|
Test Equipment |
DGBELL newly battery washing tester consisting of test chamber and washing chamber under test chamber. Moreover, it motorized rotary propeller mounted inside of test chamber and on internal wall of test chamber, drying system is mounted....
|
Test Equipment |
DGBELL Battery Internal Short Circuit Tester suits the IEC 62133-2017....
|
Test Equipment |
DGBELL Battery Crush Nail Penetration Tester is used to simulate the battery penetration test of a sharp object during packaging, transportation, storage, use and disposal. ...
|
Test Equipment |
DGBELL battery projectile / burning tester is suitable for testing the flame resistance and flammability of various consumer batteries, such as mobile phones and notebook computers....
|
Test Equipment |
DGBELL battery drop tester is used to test the drop impact performance of large, heavy-duty packaging products by simulating real surface, edge, and corner differences....
|
Test Equipment |
DGBELL battery impact tester tests the safety of the battery through different weights, different heights and different impact areas. After a series of tests on this battery impact tester, the battery must not have flame or explosion....
|
Test Equipment |
DGBELL Thermal abuse test chamber is suitable for standard IEC 62133-2017, UL 1642 and GB 31241-2014....
|
Test Equipment |
DGBELL Temperature control battery short circuit test chamber is designed to comply with standard. According to the short-circuit test requirement, the short-circuit must be less than 5 mΩ to achieve maximum curren....
|
Test Equipment |
DGBell’s altitude simulation test chamber is suitable for battery low pressure (high altitude) simulation test, and all tested samples are at 11.6KPa. To test whether the battery will explode, catch fire or leak liquid....
|
Test Equipment |
DGBell’s battery crush test chamber is used to battery crush test. This battery testing equipment simulates the conditions of the battery crushing and display comminution result....
|
Test Equipment |
DGBELL Servo Computer Battery Crush Tester simulates the situation in which various types of lithium batteries are squeezed during use. Artificially present different conditions that may occur when the battery is squeezed....
|
Test Equipment |
DGBell’s Double-deck High Temperature Aging Test Chamber is widely used to the aging test for electronic products, solar panel, plastic products, especially for battery temperature aging test....
|
Test Equipment |
DGBELL Sand and dust test chamber is suitable for all kinds of automotive parts dust-proof, dust resistance test. Test components including automotive lights, instrumentation, electrical cover, switch system, door lock, etc., and test its sealing performance. Besides, it also has view window with il...
|
Test Equipment |
DGBell’s rain spray test environmental chamber is also known as rain spray test chamber, it is used to test the water resistance for electronic and electrical products, such as solar lights, garden lights, buried lights, tunnel lights, car lights, fountain lights, the display…et...
|
Test Equipment |
DGBELL Salt spray chamber is used to test materials likes paints, electroplating, non-organic, pastry film, anode treatment and rust prevention oil’s corrosion resistance performance. Besides, anti-corrosion treatment of various materials to make their products resistant to corrosion....
|
Test Equipment |
DGBell’s Vacuum Drying Oven is designed for drying powder, curing, sterilizing and many other application which sensitive to heat and pressure. It provides a elevated temperature range from RT+10°C to 200°C when reducing environmental pressure....
|
Test Equipment |
Application:
DGBell’s Altitude & Temperature Test Chamber combine Altitude and temperature to test various components and products, especially the aircraft avionics. Automatic controlled vacuum system provide a precise altitude simulated condition up ...
|
Test Equipment |
Relevant standards requirement
Test Object: battery pack andsystem.
Refer GB/T4 part 5.5.2 test method, test according to GT/T2423.17 test conditions.
The salt solution was made up with sodium chloride (chemicall...
|
Test Equipment |
DGBell’s walk-in environmental chamber for temperature humidity testing is perfectly meet the large size test application that require high temperature and high humidity. The walk-in chamber is constructed with structural steel, so it is able to test the large components and products. Vari...
|
Test Equipment |
DGBell Thermal Shock Test Chamber (3 Zone) consist of the Test Zone, Heat Storage Zone and Cold Storage Zone. The specimen stay in test zone, hot and cold air will be blew from the storage zones to achieve rapid temperature change for thermal shock....
|
Test Equipment |
DGBell Thermal Shock Test Chamber is developed to meet the greater demands for high accelerated stress tests (HAST) of electrical and electronic components. The specimen transfer directly between hot and cold zone to achieve rapid product temperature change for thermal shock, also known as Environme...
|
Test Equipment |
DGBELL Temperature Humidity Vibration Combined Test Chamber meets national standards and meets specific testing requirements. It is widely used in electrical and electronic products, automotive parts, materials, etc....
|
Test Equipment |
DGBell’s Double-deck High and Low Temperature Test Chamber was designed to test battery cell combined with charge and discharge equipment, and also available to thermal test for small products and components....
|
Test Equipment |
DGBell's High Temperature Aging Chamber is widely applied for automotive parts ,electronic and electric products ,components and materials by constant high temperature reliability test....
|
Test Equipment |
DGBell’s Temperature and Humidity Test Chamber is able to simulate a wide range of temperature and humidity environment condition for testing various products and components. It is widely used for basic thermal cycling test and accelerated stress test. We provide 6 standard models, test ca...
|
Test Equipment |
DGBell's Benchtop Temperature and Humidity Test Chamber provides a compact footprint and multi-function test performance. It is very popular for labs and product manufacturers to test various small electronic product, electronic components and materials with simulating temperature a...
|
Test Equipment |