Stencil Printing of Small Apertures
Published: |
October 25, 2012 |
Author: |
William E. Coleman Ph.D. |
Abstract: |
First published in the 2012 IPC APEX EXPO technical conference proceedings. This paper will examine stencil technologies (including Laser and Electroform), Aperture Wall coatings (including Nickel-Teflon coatings and Nano-coatings), and how these parameters influence paste transfer for miniature devices with Area Ratios less than the standard recommended lower limit of .5. A matrix of print tests will be utilized to compare paste transfer and measure the effectiveness of the different stencil configurations. Area Ratios ranging from .32 to .68 will be investigated.... |
|
Company Information:
More articles from Photo Stencil LLC »
- Nov 05, 2015 - Print Performance Studies Comparing Electroform and Laser-Cut Stencils
- Jan 11, 2013 - Electroformed vs. Laser-cut: A Stencil Performance Study
- See all SMT / PCB technical articles from Photo Stencil LLC »
More SMT / PCB assembly technical articles »
- Apr 11, 2022 - iNEMI Webinar 07.07.2021 - PCB Cleaning | ZESTRON Americas
- Jan 28, 2022 - Open Radio Unit White Box 5G | Whizz Systems
- Nov 10, 2021 - Understanding the Cleaning Process for Automatic Stencil Printers | ITW EAE
- Oct 20, 2021 - PCB Surface Finishes & The Cleaning Process - A Compatibility Study | ZESTRON Americas
- Oct 06, 2021 - Cleaning Before Conformal Coating | ZESTRON Americas
- Browse Technical Library »
Stencil Printing of Small Apertures article has been viewed 762 times
davef
October 31, 2012
The Electroformed stencil with Nickel-Teflon plating had good transfer for each aperture size until the 150 micron opening. Why do you suppose that it had such a dramatic roll-off in transfer rate with that small aperture?