SMT, PCB Electronics Assembly Manufacturing News
Stay informed with latest electronics manufacturing news added by SMTnet members.
- SMTnet
- »
- SMT, PCB Electronics Manufacturing & Assembly Industry News
19855 SMT / PCB Assembly Industry News Releases
Libra Industries Promotes Jim Zelina to Program Manager
Jul 02, 2018 | Libra Industries is pleased to announce the promotion of Jim Zelina to the position of Program Manager. Zelina will be relocating to Plant Two and reporting to Roy Starks.
A leading provider of integrated Electronic Manufacturing Services serving OEM manufacturers dealing with complex or technically sophisticated manufacturing requirements in diverse industries and applications.
Mentor, Ohio, USA
SHENMAO Hires Don Dennison as New East Coast Rep
Jul 02, 2018 | SHENMAO America, Inc. is pleased to announce the appointment of Mr. Don Dennison of PIT Equipment Services to be their manufacturer’s rep covering Southeastern New York, New Jersey and Eastern Pennsylvania.
SHENMAO Technology, Inc. supplier of Pb/Pb-free Solder Pastes, Solder Wire, Solder Bar, Flux, BGA Sphere, Bumping Paste/Flux, PCB Plating Anode, PV Ribbon Electronics Assembly Materials, for over 44 years from 10 world locations.
TaoYuan County, Taiwan
Seica Inc. participation at Semicon West, July 10-12 2018, Booth 509, San Francisco, CA.
Jul 02, 2018 | Presented for the first time in US during IPC Apex, it will also be shown at Semicon West booth 509, Pilot V8 Next> series, the most versatile and performing flying probe system in the world, which represent yet another outstanding technological leap forward in Seica’s continuous “road” to innovation. This time it will be managed by Viva Next> 6, Seica’s latest evolution of its core management software platform, in a 64 bit version complete with a new graphical interface and a guided environment for creating test programs according to each specific requirement. The new platform continues to leverage its open architecture, further extending the capability of integration with third party software, such as TestStandTM, leaving programmers complete freedom to combine test sequences developed using various platforms in the same test program. In addition to the Seica OEM products described below Seica will also exhibit semiconductor solutions from Crea, OSAI and Microtest.
SEICA offers innovative ATE solutions which range from Bare Board Test, Flying Probe Systems, In-Circuit and Combi Test to Functional Test.
Strambino, Italy
New Haverhill headquarters celebration
Jul 02, 2018 | On 6 June SEICA inc. has officially inaugurated the new North American headquarters in the Ward Hill Business Park East of Haverhill, Massachusetts.
SEICA offers innovative ATE solutions which range from Bare Board Test, Flying Probe Systems, In-Circuit and Combi Test to Functional Test.
Strambino, Italy
Libra Industries Appoints New Product Launch & Component Engineering Technicians
Jul 02, 2018 | Libra Industries is pleased to announce the promotion of two associates to New Product Launch & Component Engineering Technician. Adriane Page and Mike Simons will report to Roy Starks.
A leading provider of integrated Electronic Manufacturing Services serving OEM manufacturers dealing with complex or technically sophisticated manufacturing requirements in diverse industries and applications.
Mentor, Ohio, USA
Attention all USA Customers. No 25% Import Duty on Heller Reflow Ovens
Jul 02, 2018 | Heller Industries Announces That It Will NOT Be Subject To The 25% Import Duty on Reflow Oven Purchases
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
Florham Park,
Libra Industries Appoints New Product Launch & Component Engineering Technicians
Jul 01, 2018 | Libra Industries is pleased to announce the promotion of two associates to New Product Launch & Component Engineering Technician. Adriane Page and Mike Simons will report to Roy Starks.
A leading provider of integrated Electronic Manufacturing Services serving OEM manufacturers dealing with complex or technically sophisticated manufacturing requirements in diverse industries and applications.
Mentor, Ohio, USA
CUI Partners with SnapEDA to Offer Free PCB Footprint Files
Jun 27, 2018 | CUI today announced that it has teamed up with SnapEDA, the market-leading parts library for circuit board design, to provide designers with a catalog of free, ready-to-download PCB footprints and symbols for CUI’s range of board mount electromechanical components.
SnapEDA is the Internet's first parts library for circuit board design, providing free symbols, footprints and 3D models for millions of electronic components. Join half a million engineers at www.snapeda.com.
San Francisco, California, USA
Libra Industries Appoints New Product Launch & Component Engineering Technicians
Jun 26, 2018 | Libra Industries is pleased to announce the promotion of two associates to New Product Launch & Component Engineering Technician. Adriane Page and Mike Simons will report to Roy Starks.
A leading provider of integrated Electronic Manufacturing Services serving OEM manufacturers dealing with complex or technically sophisticated manufacturing requirements in diverse industries and applications.
Mentor, Ohio, USA
PORTA-WAND® ELITE 110-220 VAC Vacuum Tweezer Kit from Virtual Industries
Jun 26, 2018 | Virtual Industries features a product line of hand tools that replace tweezers or other gripping means for many applications. The PORTA-WAND® ELITE 110-220 VAC Vacuum Tweezer Kit is a Cleanroom-safe tool that handles up to 8" (200 mm) wafers or solar cells. It comes equipped with a detachable 9.6V NiMH rechargeable battery pack, an in-stand charger (P/N VPW-CHARGER-110-220) and one wafer tip.
3M Electrical Solutions Division
A full range of product, software and service solutions to help electronics manufacturers maintain an effective EOS/ESD control program.
Austin , Texas, USA
High Quality Hand Soldering Tools from Metcal at SMTA Ohio
Jun 26, 2018 | Metcal today announced plans to exhibit at the SMTA Ohio Expo & Tech Forum, scheduled to take place Thursday, July 12, 2018 at the Embassy Suites Cleveland Rockside in Cleveland. The company will demonstrate its Connection Validation (CV) Soldering System with new hand-pieces, Digital Hot Air Pencil and Solder Tip Cleaner.
Manufacturer of high-performance precision rework systems for the electronics bench. Product lines include: Hand Soldering and Desoldering, Convection Rework products, Fume Extraction and Fluid Dispensing tools.
Cypress, California, USA
IPC APEX EXPO 2019 … Exhibit Space Going Fast
Jun 26, 2018 | IPC – Association Connecting Electronics Industries® reports that 85 percent of exhibit floor space has been sold for IPC APEX EXPO® 2019. Three hundred twenty-seven exhibitors have been assigned to 134,200 net square feet of exhibit space, marking a 5 percent increase in square footage compared to 2018’s booth space selection event. The premier technical conference and exhibition for the electronics manufacturing industry will take place January 29–31, 2019, at the San Diego Convention Center in San Diego, Calif.
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
SMTA Capital Chapter’s Expo and Tech Forum to be Held on August 23rd
Jun 26, 2018 | The SMTA Capital Chapter is pleased to invite you to its upcoming Capital Expo and Tech Forum at Johns Hopkins University / Applied Physics Lab, Kossiakoff Center, 11100 Johns Hopkins Road, Laurel, MD 20723, on Thursday, August 23rd.
Surface Mount Technology Association (SMTA)
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Eden Prairie, Minnesota, USA
Association / Non-Profit, Events Organizer, Training Provider
SMTA International Conference Program Finalized and Registration Now Open
Jun 26, 2018 | The SMTA is pleased to announce that the program and registration for the SMTA International Conference and Exhibition is finalized and available on-line at www.smta.org/smtai. Taking place October 14-18, 2018 at the Donald Stephens Convention Center in Rosemont, Illinois, the conference features 20 workshops, 130 technical papers, and numerous complimentary offerings for engineers and professionals in the electronics manufacturing industry.
Surface Mount Technology Association (SMTA)
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Eden Prairie, Minnesota, USA
Association / Non-Profit, Events Organizer, Training Provider
Almit GmbH Reports Success and Halide-Free Trend at SMT Nuremberg.
Jun 26, 2018 | Solder materials specialist, Almit, reports continuing interest in its premium products from visitors to the company’s stand at the SMT Hybrid Packaging exhibition in Nuremberg.
Almit is one of the leading providers of solder wires, solder pastes and of course lead-free solders, which are also successfully applied in the aerospace industry, in the automotive field but also in consumer electronics.
Michelstadt, Germany
Press preview for Seica Inc. participation at Semicon West, July 10-12 2018, Booth 509, San Francisco, CA.
Jun 24, 2018 | Presented for the first time in US during IPC Apex, it will also be shown at Semicon West booth 509, Pilot V8 Next> series, the most versatile and performing flying probe system in the world, which represent yet another outstanding technological leap forward in Seica’s continuous “road” to innovation. This time it will be managed by Viva Next> 6, Seica’s latest evolution of its core management software platform, in a 64 bit version complete with a new graphical interface and a guided environment for creating test programs according to each specific requirement. The new platform continues to leverage its open architecture, further extending the capability of integration with third party software, such as TestStandTM, leaving programmers complete freedom to combine test sequences developed using various platforms in the same test program. In addition to the Seica OEM products described below Seica will also exhibit semiconductor solutions from Crea, OSAI and Microtest.
SEICA offers innovative ATE solutions which range from Bare Board Test, Flying Probe Systems, In-Circuit and Combi Test to Functional Test.
Strambino, Italy
New Applicator Guns from Techcon at Farnborough International Airshow
Jun 21, 2018 | Techcon today announced plans to exhibit at Farnborough International, scheduled to take place July 16-22, 2018 in Farnborough, England. The company will introduce the TS2560 Series Applicator Guns to the aerospace market, and showcase its TSR2000 Smart Dispensing Robots and Smart Valve Controllers in Hall 3, Stand 3-756.
Techcon offers a wide array of fluid dispensing products and provides dispensing components ranging from disposable accessories to complete microprocessor-controlled dispensing systems, and precision valves.
Cypress, California, USA
IPC’s PCB Technology Trends Study Underway, PCB Fabricator Survey Open Until July 13
Jun 21, 2018 | IPC launched a global survey of printed circuit board (PCB) manufacturers in the electronics industry this week. This confidential survey is part of a global data collection effort for the development of IPC’s 2018 PCB Technology Trends study. The deadline for PCB fabricator survey responses is July 13.
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
YXLON International to Host Three Open House Events at Its Lab One Facility
Jun 21, 2018 | YXLON International announces that it will host three Lab One Electronics Open Houses. The first one will take place on June 26 and will focus on SMT. The second open house will take place on June 27 and will focus on semiconductor technology, and the third event will take place on June 28 and will focus on lab applications.
YXLON is the leading supplier of Industrial X-ray Inspection systems and Industrial Computed Tomography (CT) solutions for the non-destructive testing of materials. Markets served include Aerospace, Automotive, Electronics, etc.
Hudson, Ohio, USA
ECO-FRIENDLY MEETS HIGH-TECH – Product Launch at Nepcon Thailand
Jun 20, 2018 | At this year’s Nepcon Thailand, taking place June 20 – 23, Yxlon invites all interested parties to the great launch of their Cheetah and Cougar ECO X-ray inspection systems for use in the electronics industry. These microfocus systems, which have been developed by Yxlon in Germany, are characterized by an excellent price-performance ratio. Being entry-level systems in two sizes, each of them provides best inspection results in quality control in the SMT and semiconductor industries.
YXLON is the leading supplier of Industrial X-ray Inspection systems and Industrial Computed Tomography (CT) solutions for the non-destructive testing of materials. Markets served include Aerospace, Automotive, Electronics, etc.
Hudson, Ohio, USA
KYZEN Sees Growth in Asia & Expands Marketing Support
Jun 20, 2018 | KYZEN today announced that Lina Ong has taken on an expanded role as Marketing Specialist at KYZEN’s Southeast Asia Headquarters in Penang, Malaysia. As KYZEN has grown, so has Ong’s importance to KYZEN’s marketing effort in Southeast Asia and China.
A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.
Nashville, Tennessee, USA
IPC Extends Deadline on Call for Participation for IPC APEX EXPO 2019 Deadline for technical conference paper abstracts extended to: June 29, 2018
Jun 20, 2018 | IPC — Association Connecting Electronics Industries® has extended the deadline of their invitation for engineers, researchers, academics, technical experts and industry leaders to submit abstracts for IPC APEX EXPO 2019 to be held at the San Diego Convention Center. The technical conference will take place January 29–31, 2019. The extended deadline for technical conference abstracts is June 29, 2018.
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
Inspection Services Labs in San Jose and Ohio Now Fully Equipped with Non-Destructive Testing Technology
Jun 20, 2018 | Yxlon has completed installation of its latest technology systems in the company’s two Inspection Services facilities in North America open for customer trials and outsourced inspection contracting.
YXLON is the leading supplier of Industrial X-ray Inspection systems and Industrial Computed Tomography (CT) solutions for the non-destructive testing of materials. Markets served include Aerospace, Automotive, Electronics, etc.
Hudson, Ohio, USA
VJ Electronix Promotes Frank Cosentino to Western Regional Sales Manager for the Americas
Jun 20, 2018 | VJ Electronix today announced the promotion of Frank Cosentino to Western Regional Sales Manager for the Americas. In this capacity, he will be responsible for the VJE sales activity in the western half of the US, including British Columbia and Baja Mexico.
VJE provides AI technology applications enabling x-ray component counting: highest ROI, speed and accuracy. As electronics manufacturing equipment supplier we provide X-ray counters, rework and x-ray inspection. (978) 486-4777
Chelmsford, Massachusetts, USA
Scienscope Expands Partnership with Restronics
Jun 20, 2018 | Scienscope International is pleased to announce that it has partnered with Restronics as its newest manufacturers’ representative. Steve Clair will represent Scienscope’s X-ray and component counting technology in Upstate NY and Tony Molina will represent the company in AZ and New Mexico effective immediately.
Scienscope supplies inspection equipment, including stereo zoom microscopes, video an X-Ray inspection equipment, automated optical inspection systems, magnifiers, measurement systems.
Chino, California, USA
About the creation of communication standards to enable machine to machine cooperation in SMT lines by ELS
Jun 18, 2018 | The SMT equipment communication rule standardization subcommittee (hereafter referred to as ELS) from the Japan Robot Association (hereafter referred to as JARA), of which Fuji Corporation is a member, has advanced the standardization of communication for M2M cooperation in SMT lines.
The standard JARAS 1014 has been introduced for the SMT market.
A leading manufacturer of SMT equipment and other machine tools used in industrial manufacturing.
Aichi, Japan
Online SMT Auction July 5th – July 10th, 2018
Jun 18, 2018 | Toggled in Troy, MI will be liquidating some of their excess and unused assets utilizing the online auction services of Baja Bid. The bidding for this event will open promptly at 8:00am EST on July 5th and the closing will begin at 1:00 pm EST on July 11th.
BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.
Odessa, Florida, USA
SMT Nuremberg Pays Off for Europlacer & Speedprint.
Jun 17, 2018 | Europlacer and Speedprint pulled in leads from prospects across Europe on the shared stand at this year’s SMT Hybrid Packaging event in Nuremberg.
Europlacer designs and manufactures a comprehensive range of highly flexible SMT pick and place equipment for the global electronics industry, with a network of distributors across the globe.
Poole Dorset, United Kingdom
Libra Industries’ Christopher R. Howell Memorial Foundation Awards $22,500 in Scholarships during Annual Golf Outing
Jun 17, 2018 | Libra Industries recently sponsored the Christopher R. Howell Memorial Foundation’s 13th Annual Golf Outing that took place Monday, June 4, 2018 at the Kirtland Country Club. During the event, Libra Industries’ CEO Rod Howell awarded three scholarships totaling $22,500. The scholarships were awarded as follows:
A leading provider of integrated Electronic Manufacturing Services serving OEM manufacturers dealing with complex or technically sophisticated manufacturing requirements in diverse industries and applications.
Mentor, Ohio, USA
New Low-Temperature Solder Paste from SHENMAO
Jun 17, 2018 | SHENMAO America, Inc. is pleased to introduce its PQ10 Low Temperature Solder Paste. As the world’s major solder materials provider, SHENMAO produces SMT solder paste, laser soldering paste, cored solder wire, wave solder bar, semiconductor packaging solder spheres, wafer bumping solder paste, flux and solar PV ribbon.
SHENMAO Technology, Inc. supplier of Pb/Pb-free Solder Pastes, Solder Wire, Solder Bar, Flux, BGA Sphere, Bumping Paste/Flux, PCB Plating Anode, PV Ribbon Electronics Assembly Materials, for over 44 years from 10 world locations.
TaoYuan County, Taiwan
Jeremy Zhou Appointed to China Regional Sales Manager for VJ Electronix, Inc.
Jun 17, 2018 | VJ Electronix today announced that Jeremy Zhou was promoted to China Region Sales Manager. In this capacity, Zhou will be responsible for the company’s sales and technical support activity in China.
VJE provides AI technology applications enabling x-ray component counting: highest ROI, speed and accuracy. As electronics manufacturing equipment supplier we provide X-ray counters, rework and x-ray inspection. (978) 486-4777
Chelmsford, Massachusetts, USA
IPC’s PCB Technology Trends Study Underway, OEM Survey Open Until July 6
Jun 17, 2018 | IPC launched a global survey of original equipment manufacturers (OEMs) in the electronics industry this week. This confidential survey is part of a global data collection effort for the development of IPC’s 2018 PCB Technology Trends study. The deadline for OEM survey responses is July 6.
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
Join Scienscope this Week at the SMTA Upper Midwest Expo
Jun 17, 2018 | Scienscope International today announced that plans to exhibit at the Upper Midwest Expo & Tech Forum, scheduled to take place Thursday, June 14, 2018 at the DoubleTree by Hilton Minneapolis - Park Place in Minneapolis, MN. The company will exhibit with JW Sales, who will discuss the AXI-5100c inline component counter and AXC-800 X-ray component reel counter, as well as its micro-focus X-ray inspection systems. The release of the AXI-5100c in addition to the AXC-800 allows Scienscope to offer the most comprehensive component counting system solutions in the industry.
Scienscope supplies inspection equipment, including stereo zoom microscopes, video an X-Ray inspection equipment, automated optical inspection systems, magnifiers, measurement systems.
Chino, California, USA
IPC Hand Soldering Regional Qualification Competition Winner Crowned at SMT Hybrid Packaging 2018
Jun 17, 2018 | The competition was fierce as 27 competitors went soldering iron to soldering iron in IPC’s Hand Soldering Regional Qualification Competition at SMT Hybrid Packaging 2018 in Nuremberg, Germany. Of the 27 boards submitted by the competitors only four of the electronic assemblies were functional. Taking first place and a cash prize of €300 was Catherine Cardinal-Simoan, Thales International, who earned 422 points out of a possible 445.
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
DDM Novastar Welcomes New Director of Engineering
Jun 17, 2018 | DDM Novastar is pleased to announce the return of Brian Osterhout as DDM Novastar’s director of engineering. Brian has over 30 years of machine design experience, with a broad background in product development and manufacturing. From 2005 to 2010, he worked as Senior Designer & Project Engineer for APS Novastar (DDM Novastar’s previous entity) and helped design the firm’s L Series Pick & Place machine, along with enhancements to the reflow oven and Stencil Printer product lines. From 2010 to the present, Brian continued to expand his knowledge base, working for a Philadelphia manufacturer specializing in fluid-film bearings. This added to his diverse background in fabrication and machining.
Turnkey SMT assembly solutions, manual & automated stencil printers, manual & automatic pick & place systems with dispensers, wave solder & selective solder machines, lead free solder reflow ovens, component counters, & thru-hole
Ivyland, Pennsylvania, USA
VJ Electronix Announces New Eastern Regional Sales Manager for the Americas
Jun 17, 2018 | VJ Electronix today announced the promotion of Robert Kerwin to Eastern Regional Sales Manager for the Americas. In this capacity, Kerwin will be responsible for the VJE sales activity in the eastern half of the US, Canada (except British Columbia), Mexico (except Baja) and South America.
VJE provides AI technology applications enabling x-ray component counting: highest ROI, speed and accuracy. As electronics manufacturing equipment supplier we provide X-ray counters, rework and x-ray inspection. (978) 486-4777
Chelmsford, Massachusetts, USA
ADLINK Partners with FFG for 5G- and ROS2-based Factories of the Future
Jun 17, 2018 | ADLINK Technology has joined forces with Fair Friend Group (FFG) to develop the new ROS2 toward Converged 5G for Factories of the Future project. The collaboration integrates wireless 5G network technologies with ROS2 (Robot Operating System 2) platforms to provide system architecture enabling real-time control and reliable communication. Igniting the next wave of growth for the network communication sector, the project can drive Industry 4.0 ecosystem development to bring on a productivity revolution for Factories of the Future.
Provider of wide range of embedded computing products and services to the test & measurement and automation industries.
New Taipei City 235, Taiwan
Kurtz Ersa Mexico to Participate in SMTA Queretaro Expo
Jun 17, 2018 | Kurtz Ersa Inc. today announced plans to exhibit at the SMTA Queretaro Table Top Exhibition & Tech Forum, scheduled to take place Thursday, July 12, 2018 at the Hotel Mision Juriquilla in Mexico.
Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.
Wertheim, Germany
KIC Introduces Auto Profiling and Intelligent Network Software Ecosystem RPI i4.0
Jun 17, 2018 | KIC is pleased to announce a new automatic profiling system with network software for real-time dashboard, data sharing and traceability storage. The new RPI i4.0 automatically acquires profile data from each product soldered in the reflow oven, in real-time.
Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.
Wertheim, Germany
Fast, Flexible Component Counting from Scienscope
Jun 17, 2018 | Scienscope International today announced plans to exhibit at the SMTA Ohio Expo & Tech Forum, scheduled to take place Thursday, July 12, 2018 at the Embassy Suites Cleveland Rockside in Cleveland. The company will discuss its AXI-5100c inline component counter.
Scienscope supplies inspection equipment, including stereo zoom microscopes, video an X-Ray inspection equipment, automated optical inspection systems, magnifiers, measurement systems.
Chino, California, USA
Capabilities Video Launched
Jun 15, 2018 | BEST Inc launches the release of a company capabilities video. The story of how EMS and wire harness and electronics companies can be serviced by BEST Inc. is told in a fun and compelling way.
BEST offers professional rework, repair and prototype builds of PCBs. Our expertise is on BGA rework and QFN rework. Our experienced instructors teach professional soldering classes as we are an IPC certified training center
Rolling Meadows, Illinois, USA
Quick Adjust PCB Racks
Jun 14, 2018 | Now available from FKN Systek, Stackable PCB Transport and Storage Racks made of conductive material for safe and convenient handling of Printed Circuit Cards during assembly. These Racks will hold up to 50 PCBs from 2” to 9.8” (5 to 25 cm) wide. Racks are made of conductive plastic temperature rated to 176 O F, Surface resistance <10 6
Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.
Millis, Massachusetts, USA
Fast, Flexible Component Counting from Scienscope
Jun 14, 2018 | Scienscope International announced plans to exhibit at the SMTA Ohio Expo & Tech Forum, scheduled to take place Thursday, July 12, 2018 at the Embassy Suites Cleveland Rockside in Cleveland. The company will discuss its AXI-5100c inline component counter.
3M Electrical Solutions Division
A full range of product, software and service solutions to help electronics manufacturers maintain an effective EOS/ESD control program.
Austin , Texas, USA
Allchips and Songshan Lake Xbot Park on Supply Chain of Electronic Components Interconnects in 2018
Jun 13, 2018 | Allchips began cooperation with Songshan Lake Xbot Park to jointly promote progress in technology and innovation.
.png)
Allchips is a professional electronic components supply chain service platform, supported by over 1000 original manufacturers & authorized agents, and more than 10,000,000 products data.
Shenzhen, China
TME Chooses Allchips as Their Partner to Serve Small End Users
Jun 13, 2018 | TME and Allchips will work together to serve small end users which the original factories or their authorized agents do not offer any services or electronic components to them.
Allchips is a professional electronic components supply chain service platform, supported by over 1000 original manufacturers & authorized agents, and more than 10,000,000 products data.
Shenzhen, China
Fast, Flexible Component Counting from Scienscope
Jun 13, 2018 | Scienscope International announced plans to exhibit at the SMTA Ohio Expo & Tech Forum, scheduled to take place Thursday, July 12, 2018 at the Embassy Suites Cleveland Rockside in Cleveland. The company will discuss its AXI-5100c inline component counter.
3M Electrical Solutions Division
A full range of product, software and service solutions to help electronics manufacturers maintain an effective EOS/ESD control program.
Austin , Texas, USA
Fast, Flexible Component Counting from Scienscope
Jun 13, 2018 | Scienscope International announced plans to exhibit at the SMTA Ohio Expo & Tech Forum, scheduled to take place Thursday, July 12, 2018 at the Embassy Suites Cleveland Rockside in Cleveland. The company will discuss its AXI-5100c inline component counter.
3M Electrical Solutions Division
A full range of product, software and service solutions to help electronics manufacturers maintain an effective EOS/ESD control program.
Austin , Texas, USA
CLARIANT INTRODUCES HUMITECTOR™ TYPE 2 NON-REVERSIBLE HUMIDITY INDICATOR CARDS FOR SMD DRY PACKING
Jun 13, 2018 | Market's first non-reversible humidity indicator Card Type 2 is low-halogen and cobalt-dichloride-free. Complies with the latest revision of IPC/JEDEC standard, J-STD-033D.
Clariant Cargo & Device Protection
Clariant Cargo & Device Protection offers a complete portfolio of desiccants and humidity indicator cards for use in dry packing.
Belen, New Mexico, USA
Dover Motion Launches a New Low-Cost Alternative to Piezo Stages
Jun 13, 2018 | BOXBOROUGH, MA (June 13, 2018) – Dover Motion, a designer and manufacturer of motion solutions for life sciences and diagnostics instruments, today announced the launch of the DOF-5 Objective Focusing Stage. The DOF-5 is a microscope objective nanopositioning stage optimized for optical imaging applications.
Dover Motion creates motion solutions for the life sciences, diagnostics, and factory automation industries; and designs multi-axis stages for applications such as imaging, optics, focusing, positioning, and motion control.
Boxborough, Massachusetts, USA
Saelig Introduces New Rigol 7000 Series 100/500MHz 10GSa/s oscilloscopes
Jun 12, 2018 | The MSO7000/DS7000 series of high-performance digital oscilloscopes integrates six independent instruments into one device with large memory depth, a large touch-screen display, superior waveform capture rate and powerful data analysis functions.
Founded in 1988 in Rochester, NY, Saelig is a North American distributor with a growing reputation for finding and sourcing unique, easy-to-use control and instrumentation products.
Fairport, New York, USA
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398
