Dimension: 390 x 350 x 260mm
Weight: 22kg
Display Mode: Touch Screen
Power: AC90-250V/50/60HZ, 120-180W
Cutting Length: 1mm - 99m
Stripping Length: 0 - 25mm
Wire Size: 0.1 – 2.5mm2
|
Other |
Dimension: 420 x 335 x 226mm
Weight: 25kg
Display Mode: Touch Screen
Power: AC90-250V/50/60HZ, 120-220W
Cutting Length: 1mm - 99m
Stripping Length: 0 - 30mm
Wire Size: 0.1 – 5.5mm2
<...
|
Other |
Dimension: 420 x 335 x 226mm
Weight: 25kg
Display Mode: Touch Screen
Power: AC90-250V/50/60HZ, 120-220W
Cutting Length: 1mm - 99m
Stripping Length: 0 - 30mm
Wire Size: 0.1 – 2.0mm2
|
Other |
Dimension: 420 x 335 x 226mm
Weight: 25kg
Display Mode: Touch Screen
Power: AC90-250V/50/60HZ, 120-220W
Cutting Length: 1mm - 99m
Stripping Length: 0 - 30mm
Wire Size: 0.1 – 2.0mm2
|
Other |
Dimension: 390 x 350 x 260mm
Weight: 22kg
Display Mode: Touch Screen
Power: AC90-250V/50/60HZ, 120-200W
Cutting Length: 1mm - 99m
Stripping Length: 0 - 25mm
Wire Size: 0.1 – 4.5mm2
|
Other |
Dimension: 420 x 335 x 226mm
Weight: 25kg
Display Mode: Touch Screen
Power: AC90-250V/50/60HZ, 120-220W
Cutting Length: 1mm - 99m
Stripping Length: 0 - 30mm
Wire Size: 0.1 – 2.0mm2
|
Other |
The R1816 infrared reflow oven is used for electron production and maintain of SMT technique. The product adopts the far-infrared heating components and excellent sense temperature materials. Through the precise control of the microcomputer, make the temperature control curve match to the requ...
|
Reflow |
This oven is used for electron production and maintain of SMT technique. The product adopts the far-infrared heating components and excellent sense temperature materials. Through the precise control of the microcomputer, make the temperature control curve match to the request of the SMT produc...
|
Reflow |
Introduction
This oven is used for electron production and maintain of SMT technique. The product adopts the far-infrared heating components and excellent sense temperature materials. Through the precise control of the microcomputer, make the temperature control curve match to the r...
|
Reflow |
This simple printer is SMT dedicated process equipment for screen printing or leakage printing. The printing process is completed manually. It is low-cost, easy to use, easy to learn, high efficiency and suitable for small batch, research & development and production of multi-species proce...
|
Printing |
Features:
1. it is adjustable on height and x,y direction,aluminum alloy flat countertops,corrosion-resistant
2. easy to adjust,easy to operate,accurate and reliable.
3. metal frame,can achieve large area with thin workpiece surface precision printing.
Techni...
|
Printing |
Features:
1. PC control,touch screen display and menu operation interface
2. Floating scraper.similar to automatic printer, the scraper can be floated freely up and down and can be adjusted automatically to level with the steel grid.
3. The pressure of the scra...
|
Printing |
Features
1. PC control ,touch screen display and menu operation interface
2. Floating scraper.similar to automatic printer, the scraper can be floated freely up and down and can be adjusted automatically to level with the steel grid.
3. The pressure of the scraper is ad...
|
Printing |
Features
1. microcomputer control, touch screen display, menu operation interface.
2. scraper floating. (Similar to automatic printing presses, scraper can freely fluctuate and automatically adjusts the level of steel mesh).
3. Adjustable squeegee pressure (which can be...
|
Printing |
Apply
The Single Magazine Unloader is designed for unloading of PCBs, an arriving PCB is taken up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The magazine indexes to the next position and is ready for the following unloading...
|
Board Handling - Conveyors |
Apply
The Single Magazine Loader is designed for loading of PCBs. The unit loads your production line automatically by pushing PCB’s out of a magazine onto the conveyor of the down-stream machine.
Features
1. PLC Control system....
|
Board Handling - Conveyors |
Apply
The 90°Turn conveyor is designed for changing the conveying direction of flow of a PCB production line. It’s controlled with air cylinder, rotate smoothly and accurately.
Features
1. PLC Control system.
2.&n...
|
Board Handling - Conveyors |
The PCB Unloader is designed for unloading of PCBs, an arriving PCB is taken up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The magazine indexes to the next position and is ready for the following unloading cycle.
Connect with SMT and AI p...
|
Board Handling - Conveyors |
Apply
The PCB Loader is designed for loading of PCBs. The unit loads your production line automatically by pushing PCB’s out of a magazine onto the conveyor of the down-stream machine. Connect with SMT and AI productions line, safety design ensure not to break any&...
|
Board Handling - Conveyors |
Apply
The Bare Board Loader designed for automatically loading unpopulated boards at the beginning, or in the middle of a PCB assembly line. The bare boards are lifted one by one from the stack by vacuum and are gently lowered onto the belt segment, ready for the downstr...
|
Board Handling - Conveyors |
Apply
The PCB Conveyor is used in the PCB assembly line when frequent visual inspection of PCBs is required, can be used as an Inspection conveyor or a Linking conveyor.
Features
1. PLC Control system....
|
Board Handling - Conveyors |
Apply
The PCB Conveyor is used in the PCB assembly line when frequent visual inspection of PCBs is required, can be used as an Inspection conveyor or a Linking conveyor.
Features
1. PLC Control system....
|
Board Handling - Conveyors |
Apply
The Lowering Gate Conveyor is used when a passage way is required in a production line(semiautomatic).
Features
1. PLC Control system.
2. Lowering and lifting of gate conveyor by cylinder.
3. Width adjustment by han...
|
Board Handling - Conveyors |
Apply
The Telescopic Gate Conveyor is used for creating a passage in the PCB assembly line to give the operator access to the rear of the production equipment.
Features
1. PLC Control system.
2. FUJI button, easily operation.
|
Board Handling - Conveyors |
The Wave Solder Outfeed Conveyor is used to unload PCBs from the inclined conveyors of wave solder and to then lower the soldered boards to a standard conveyor height. The angle of the shorter inlet section can be adjusted to match the angle of the wave soldering system's conveyor rails, w...
|
Board Handling - Conveyors |
Apply
The PCB NG/OK Unloader is connected to the back of AOI and has horizontal movement and go-through functions. The OK and NG PCB after being tested by AOI can be separated and sent to the PCB racks, so that the PCB can be protected better.
Features
|
Board Handling - Conveyors |
Apply
The Buffer Loader can be used as a mid-line loader or unloader, as a LIFO and FIFO buffer between SMD assembly, Connect with SMT and AI productions line. “Straight-through” may be selected so that PCB is conveyed by it, or “Automatic” may be...
|
Board Handling - Conveyors |
Apply
The PCB Destacker is used for loading bare board onto the PCB assembly line. A mechanism separate the bottom PCB from the stacker and lowers it onto the edge belt conveyor.
Features
1. PLC Control system.
2. FUJI button or ...
|
Board Handling - Conveyors |
Apply
The PCB Inverter is used for inverting the PCBs to process the board at both sides without manaul handling.
Features
1. PLC Control system.
2. FUJI button or touch screen control, easily operation.
3. By pass mode s...
|
Board Handling - Conveyors |
Apply
The PCB Traverser has horizontal movement and go-through functions, is used for transporting boards from one line into two lines.
Features
1. PLC Control system.
2. FUJI button or touch screen control, easily operation.
|
Board Handling - Conveyors |
FEATHERS
1. This machine is used to lead-cutting and forming of tapes, bulk resistors, diodes, and other axial components.
2. It finishes lead-cutting and forming at the same time, very powerful.
3. The forming span and length of jumper lead are all adjustable.&nb...
|
Components |
FEATHERS
1. It is used to cut radial leads of the unilateral taped radial components. (roll-/box-packaged)
2. It has small volume and is easy to operate.
3. It works accurately and is easy to adjust.
4. Made of steel materials impor...
|
Components |
FEATHERS
1. This machine is excellent at mending leads and suitable for any IC lead pitch.
2. It is unnecessary to change the track for this machine is adjusted by a torsion force.
3. This machine can save time and improve the working efficiency....
|
Components |
FEATHERS
1. This machine is excellent at mending leads and suitable for any IC lead pitch.
2. It is unnecessary to change the track for this machine is adjusted by a torsion force.
3. This machine can save time and improve the working efficiency....
|
Components |
FEATHERS
1. It is used to cut radial leads of bulk radial components. It is especially suitable for mass production and can save lots of labor.
2. Its cutting way is very special. Made of steel materials imported from Japan, its cutters are durable and easy to...
|
Components |
FEATHERS
1. Suitable for taped radial components, for both forming and cutting operation or cutting only.
2. Made of steel materials imported from Japan, its cutters are durable.
3. The speed is adjustable. It feeds automatically.
4. It works accurately an...
|
Components |
It is suitable for the forming of pipe-packaged power transistors, audions, and other electronic components of similar shape.
Its speed can be adjusted steplessly.
It is easy to operate and maintain.
Molds can be made upon the customer’s requirement ...
|
Lead Forming |
FEATHERS
1. This machine can convey a whole coil of wire and cut wire automatically.
2. It is easy to operate. It consumes little electricity. It is cheap and recyclable.
3. As it works smoothly, there won’t be any marks on the wire.
...
|
Components |
FEATHERS
1.This machine is used to cut radial leads of bulk radial components.
2.Its volume is very small. It is easy to operate and maintain.
3.It finishes lead-cutting and forming at the same time, which facilitates the work of inserts.
4.One such machin...
|
Components |
FEATHERS
1.It is used to grind tungsten steel blades of PCB lead cutting machine.
2.The angle of grinding is adjustable. It is easy to operate. All parts cooperate perfectly. The grinding is of high precision.
3.Adopting cycle cooling and sealing design, it can ke...
|
Components |
FEATHERS
1. Used to cut radial leads of bulk/tube-packaged radial components.
2. Adopting the surface vibrating feeding mode, this product is applied to components of all sizes.
3. Its cutting way is very special. Made of steel ...
|
Components |
FEATHERS
1. This machine is suitable for the lead-cutting and forming of bulk resistors, diodes, and other axial components.
2. It finishes lead-cutting and forming at the same time, very powerful.
3. The forming span and length of jumper lead are all adjustable.<...
|
Components |
FEATHERS
1. It is used to cut radial leads of the unilateral taped radial components. (roll-/box-packaged)
2. It has small volume and is easy to operate.
3. It works accurately and is easy to adjust.
4. Made ...
|
Components |
FEATHERS
1. This machine is used to lead-cutting and forming of taped resistors, diodes, and other axial components.
2. It finishes lead-cutting and forming at the same time, very powerful.
3. The forming span and length of jumper lead are all adjustable.
4. Mad...
|
Components |
FEATHERS
1. This machine is used to lead-cutting and forming of tapes, bulk resistors, diodes, and other axial components.
2. It finishes lead-cutting and forming at the same time, very powerful.
3. The forming span and length of jumper lead are all adjustable.
|
Components |
FEATHERS
1. The eagle claw shrapnel clamp can nip PC boards tightly and push them forward automatically and stably.
2. The track board-delivery speed can be adjusted according to pins to increase the service life of the cutter.
3. As the principal axis rotates qui...
|
Components |
FEATHERS
1. There are three models: loose tape merger type (C-306E-1), loose type (C-306E-2), and tape-packaged type (C-306E-3).
2. This product is suitable for the processing and forming of resistors, diodes, and other axial components.
3. It finishes lead-cutting and ...
|
Components |
FEATHERS
1. There are three models: loose tape merger type (C-306F-1), loose type (C-306F-2), and tape-packaged type (C-306F-3).
2. This product is suitable for the proce...
|
Components |
FEATHERS
1. It adopts a special bi-directional orbit. PC boards are pushed manually.
2. As the principal axis rotates quickly, the machine works accurately and efficiently.
3. With a photoelectric switch, it is very safe.
SPECIFICATIONS
...
|
Components |
tem specifics
Automatic Liquid Dispenser with time control. To push the liquid pneumatically, controlled by time, to be sure the same dispensing drops and dispensing cycle time,regulated the air pressure with suitable tip at your equipments of the different liquids as glues, solder ...
|
Dispensing |